DOWNLOAD Sharp MX-M264N / MX-M264NR / MX-M264NV / MX-M264U / MX-M314N / MX-M314NR / MX-M314NV / MX-M314U / MX-M354N / MX-M354NR / MX-M354U (serv.man11) Service Manual ↓ Size: 16.85 MB | Pages: 127 in PDF or view online for FREE

Gently pull the toner cartridge horizontally toward you.
If the cartridge is pulled out abruptly, toner may spill out.

Hold the toner cartridge with both hands as shown and pull it 
out of the machine.

• After pulling out the toner cartridge, do not shake or tap it, as this will cause the toner to spill out. Promptly place the 

used cartridge into the bag that is inside the box.

• For information on discarding the cartridge, contact your place of purchase.

Push the cartridge firmly in until it clicks into place.

Lock release lever

• Do not throw a toner cartridge into a fire. Toner may fly and cause burns.

• Store toner cartridges out of the reach of small children.

• If a toner cartridge is stored on end, the toner may harden and become unusable. Always store toner cartridges on their 

• If a toner cartridge other than a SHARP-recommended toner cartridge is used, the machine may not attain full quality 

• Keep the used toner cartridge in a plastic bag (do not discard it). Your service technician will collect the used toner 

cartridge.

• To view the approximate amount of toner remaining, continually touch the [COPY] key during printing or when the machine 

is idle. The percentage of toner remaining will appear in the display while the key is touched. When the percentage falls to 
"25-0%", obtain a new toner cartridge and keep it ready for replacement.

• When the toner cartridge provided with the machine is installed, the percentage of toner remaining displayed from the 

beginning is "50-25%".

• Depending on your conditions of use, the colour may become faint or the image blurred.

•  When copying continuously for a long time, or when copying a document with large areas of black, the machine may 

display the message "Toner replenishment in progress." and pause the copy job, even though there is still toner left. In 
such a case, the machine will replenish the toner for approximately three minutes, and will resume copying once the toner 
is replenished.

If a stamp unit (AR-SU1) is installed on the automatic document feeder and the stamp has become faint, replace the 
stamp cartridge (AR-SV1).

Stamp cartridge (2 in package) AR-SV1

This section explains the text entry screen.

 

This changes the text entry screen from the lower case screen to the upper case screen. The upper case 
screen will continue to appear until the [Caps] key is touched again so that it is no longer highlighted. The 
[Caps] key is convenient when you wish to enter all capital letters. (This key will vary depending on your 
country or region.)

This key temporarily changes the keys in the text entry screen to upper case when lower case letters 
appear, or to lower case when upper case letters appear.
Touch a letter key after touching the [Shift] key to enter that letter. After the letter is entered, the [Shift] key 
will no longer be highlighted and the original text entry screen will appear.
The [Shift] key is convenient when you only need to enter one upper case letter or one lower case letter, or 
when you need to enter one of the symbols assigned to the numeric keys.
To cancel selection of the [Shift] key, touch the [Shift] key again. The [Shift] key will no longer be highlighted. 
(This key will vary depending on your country or region.)

Touch this key to enter a line break when entering the body text of an e-mail message. (This key will vary 
depending on your country or region.)

Touch this key to delete the characters to the left of the cursor one character at a time.

Touch this key to temporarily change the key layout of character entry mode to a different language. Select 
the key layout that you wish to use.

Touch this key to enter a space between letters.

This temporarily changes the entry screen to the accented letter and symbol entry screen. Touch a letter 
key after touching the [AltGr] key to enter that letter. After the letter is entered, the [AltGr] key will no longer 
be highlighted and the original text entry screen will appear.
To cancel selection of the [AltGr] key, touch the [AltGr] key again. The [AltGr] key will no longer be 
highlighted.

These keys move the cursor left and right.

These keys move the cursor to the line above or below the current line during entry of the body text of an 
e-mail message.

Touch this key to select character entry mode.

Touch this key to select symbol entry mode. Symbol mode is used to enter symbols and accented letters.

Use this to retrieve a previously stored subject for e-mail or other pre-set text.

Caps

Shift

Enter

Other Language

Space

AltGr

Characters

Symbols

Pre-Set Select