Sharp MX-M264N / MX-M264NR / MX-M264NV / MX-M264U / MX-M314N / MX-M314NR / MX-M314NV / MX-M314U / MX-M354N / MX-M354NR / MX-M354U (serv.man11) User Manual / Operation Manual ▷ View online
1-40
BEFORE USING THE MACHINE
Contents
This section describes the peripheral devices that can be used with the machine and explains how to use the finisher, as
well as Sharp OSA (application communication module and external account module).
well as Sharp OSA (application communication module and external account module).
PERIPHERAL DEVICES
Peripheral devices can be installed on the machine to increase its range of functionality.
The peripheral devices are generally optional, however, some models include certain peripheral devices as standard
equipment.
The peripheral devices are generally optional, however, some models include certain peripheral devices as standard
equipment.
(As of March, 2012)
PERIPHERAL DEVICES
Product name
Product number
Description
Document cover
MX-VR11
This holds down the original.
Reversing single pass feeder
(Automatic document feeder)
(Automatic document feeder)
MX-RP15
This automatically turns the original over to enable scanning of
both sides.
both sides.
Stand/500 sheet paper drawer
MX-DE17
Additional tray. A maximum 500 sheets of paper can be loaded.
Stand/2x500 sheet paper drawer
MX-DE18
Additional tray. A maximum 500 sheets of paper can be loaded
in each tray.
in each tray.
Low stand
MX-DS16
These are stands on which the machine is set.
High stand
MX-DS17
JOB SEPARATOR
MX-TR11
This enables separation of output locations by mode (copy,
printer, etc.).
Open to remove misfeeds when an optional job separator tray kit
or a optional finisher is installed.
printer, etc.).
Open to remove misfeeds when an optional job separator tray kit
or a optional finisher is installed.
Exit tray unit
(Right tray)
(Right tray)
MX-TE10
When a finisher is installed, this can be added to the right side of
the machine.
the machine.
Finisher
MX-FN23
Output device that enables the use of the staple function and
offset function.
offset function.
Printer expansion kit
MX-PB15
Adds a PCL6 printer function. To install this kit, the hard disk
drive is required.
drive is required.
Network scanner expansion kit
MX-NSX1
Adds a network scanner function.
Barcode font kit
MX-PF10
Adds barcode fonts to the machine.
PS3 expansion kit
MX-PK11
Enables the machine to be used as a Postscript compatible
printer.
printer.
Internet fax expansion kit
MX-FWX1
Enables Internet Fax.
Facsimile expansion kit
MX-FX11
Adds a fax function.
Application integration module
MX-AMX1
The application integration module can be combined with the
network scanner function to append a metadata file to a scanned
image file.
network scanner function to append a metadata file to a scanned
image file.
Application communication module
MX-AMX2
This allows the machine to be linked over a network to an
external software application.
external software application.
External account module
MX-AMX3
This is required to use an external account application on the
machine.
machine.
1-41
BEFORE USING THE MACHINE
Contents
Sharpdesk 1 licence kit
MX-USX1
This software enables integrated management of documents
and computer files.
and computer files.
Sharpdesk 5 licence kit
MX-USX5
Sharpdesk 10 licence kit
MX-US10
Sharpdesk 50 licence kit
MX-US50
Sharpdesk 100 licence kit
MX-USA0
Sharp OSA network scanner tool 1
licence kit
licence kit
MX-UN01A
This is an application for making scanning-related tasks more
efficient, by automatically sorting scanned data into folders, etc.
To use this, the application communication module (MX-AMX2)
is required.
efficient, by automatically sorting scanned data into folders, etc.
To use this, the application communication module (MX-AMX2)
is required.
Sharp OSA network scanner tool 5
licence kit
licence kit
MX-UN05A
Sharp OSA network scanner tool
10 licence kit
10 licence kit
MX-UN10A
Sharp OSA network scanner tool
50 licence kit
50 licence kit
MX-UN50A
Sharp OSA network scanner tool
100 licence kit
100 licence kit
MX-UN1HA
Stamp unit
AR-SU1
This stamps each original page after it is scanned in image send
mode.
mode.
Stamp cartridge
AR-SV1
Two stamp cartridges are included.
Hard disk expansion kit
MX-HD12
Add a hard disk drive and add functions.
Keyboard
MX-KB14
This is a keyboard that is incorporated into the machine. When
not used, it can be stored under the operation panel.
not used, it can be stored under the operation panel.
Some options may not be available in some countries and regions.
Product name
Product number
Description
1-42
BEFORE USING THE MACHINE
Contents
FINISHER
The finisher is equipped with the offset function, which offsets each set of output from the previous set.
In addition, each set of sorted output can be stapled.
In addition, each set of sorted output can be stapled.
PART NAMES
The following parts can be accessed when the finisher is open.
(1)
Output tray
Stapled and offset output is delivered to this tray.
The tray is slidable. Extend the tray for large output
The tray is slidable. Extend the tray for large output
(A3, A4R, B4, B5R, 12" x 18", 11" x 17", 8-1/2" x 14",
8-1/2" x 13", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5",
8-1/2" x 11"R, 8K and 16KR sizes).
8-1/2" x 13", 8-1/2" x 13-1/2", 8-1/2" x 13-2/5",
8-1/2" x 11"R, 8K and 16KR sizes).
(2)
Lever
Use this to move the finisher in order to remove a paper
misfeed, replace staples, or remove a staple jam.
misfeed, replace staples, or remove a staple jam.
(3)
Staple case
This holds the staple cartridge. Pull the case out to
replace the staple cartridge, remove a staple jam, or
remove the punch scrap case.
replace the staple cartridge, remove a staple jam, or
remove the punch scrap case.
(4)
Staple case release lever
Use this to remove the staple case.
(5)
Front cover
Open this cover to remove a paper, replace staples, or
remove a staple jam.
remove a staple jam.
SUPPLIES
The finisher requires the following staple cartridge:
Staple cartridge
(approx. 5000 staples per cartridge x 3 cartridges)
MX-SCX1
(1)
(2)
(3) (4)
(5)
Use caution when you turn on the power and when printing is taking place, as the tray may move up and down.
1-43
BEFORE USING THE MACHINE
Contents
FINISHER MAINTENANCE
When the staple cartridge runs out of staples, a message will appear in the operation panel. Follow the procedure below
to replace the staple cartridge.
to replace the staple cartridge.
Replacing the staple cartridge
1
Open the cover.
2
While pressing the lever over to the left,
slide the finisher to the left until it stops.
slide the finisher to the left until it stops.
Gently slide the finisher until it stops.
3
Lower the staple case release lever and
remove the staple case.
remove the staple case.
Pull the staple case out to the right.
4
Remove the empty staple cartridge from
the staple case.
the staple case.
5
Insert a new staple cartridge into the
staple case as shown.
staple case as shown.
Push the staple cartridge in until it clicks into place.
Click on the first or last page to see other MX-M264N / MX-M264NR / MX-M264NV / MX-M264U / MX-M314N / MX-M314NR / MX-M314NV / MX-M314U / MX-M354N / MX-M354NR / MX-M354U (serv.man11) service manuals if exist.