DOWNLOAD Sharp MX-M1055 / MX-M1205 (serv.man2) Service Manual ↓ Size: 31.08 MB | Pages: 127 in PDF or view online for FREE

MX-M1205  MX-FR53U (DATA SECURITY KIT)  22 – 1

MX-M1205

Service Manual

 

NOTE: Before installing the data security kit, be sure to perform

backup of data stored in the memory (including HDD) of the
main unit.

When the data security kit is installed, all the job data
stored in the memory (including HDD) of the main unit will
be lost.

NOTE: If the LINE indicator or the DATA indicator for the printer

and image transmission on the operation panel is lit or
blinking, data that has not been processed remains in the
memory of the main unit (including HDD). Output or trans-
mit all the data to clear the data remaining in the main unit
and then start installation. 

1)

Replace the FLASH DIMM PWB.

2)

Reboot the machine.

1)

After power on, light the backlight and no message on the
screen.

2)

Few seconds later, the screen displays the following message.

3)

The machine enters the boot mode which indicates that there
is an error in the main program.

When the machine is booted in the boot mode, the firmware ver-
sion check, the firmware install, and the version-up operation can
be performed.

NOTE: In the boot mode, the following keys are used for operation.

Note that the functions of the keys in the boot mode differ
from those in the normal mode.

The following two functions are available in the boot mode.

1

Program  ROM

1

2

Product key sheet

1

3

User manual (CD-ROM)

1

4

Firmware program (USB memory)

1

2

3

4

1

[OK] key

Executes the selected function or item.

[MENU] key

Selects a menu.

[BACK] key

Selects a menu.
(Serves as a cancel key in the execution check 
screen.)

[UP] key

Selects an item.

[DOWN] key

Selects an item.

Firmware 
version check 
function

Displays the firmware version of the ICU PWB, the 
SCU PWB, the PCU PWB, and the FAX PWB.

Firmware install 
(update) function

Installs (revises) the firmware by transmitting data 
from the PC which is connected to the ICU PWB, the 
SCU PWB, the PCU PWB, the FAX PWB, and other 
options with the USB memory or the USB cable.

Update Program Init 

Please wait

 

Version Check
IcM:UNUSUAL

[UP]

[DOWN]

[MENU]

[OK]

[BACK]

MX-M1205  MX-FR53U (DATA SECURITY KIT)  22 – 2

There are two functions available in the boot mode. These modes
can be selected by pressing [MENU] key and [BACK] key.

1)

Boot the machine in the boot mode. When the Version Check
display is indicated, press [MENU] key, and the machine
enters the Firm Update mode.

2)

Insert the USB memory which includes the update firmware file
(SFU file) into the USB port of the machine, and press [OK]
key.

3)

Select the firmware file (SFU file) of the target.

Use [UP] key and [DOWN] key to select the target file.

When [OK] key is pressed with the directory name displayed,
the control can enter the lower level directory. (However, one-
step lower level)

When [BACK] key is pressed in the lower level directory, the
control can return to the upper level directory.

4)

Press [OK] key.

The selected firmware file (SFU) is read. (It takes about 1 min-
ute.)

5)

After completion of reading, the firmware is installed (updated).
(It takes about 5 - 6 minutes.)

• The abbreviated name of the firmware which is currently

installed (updated) is displayed sequentially.

• The screen may flash instantaneously during the install

(update) process. This is a normal operation.

6)

Check the result of install (update) of the firmware.

Use [UP] key and [DOWN] key to check the results of install
(update) of all the firmware programs.

OK: Update success

NG: Update failed

Not Update: The update process is not executed.

Cause of Update process not executed:

The option unit for the target firmware is not connected.

7)

Turn OFF the power to terminate the boot mode.

1)

Enter the product key to enable the functions.

a)

Enter the system setting mode.

b)

The machine enters the product key input mode.

c)

Enter the product key.

d)

Press the registration key.

2)

After completion of the product key input, turn OFF the power
switch on the operation panel of the machine, and turn OFF
the main power switch.

3)

Turn ON the main power switch and the power switch on the
operation panel.

Execute SIM22-10 (Machine configuration display) to check to con-
firm that the set functions are enable.

Version Check
IcM:UNUSUAL

Firm Update
        From USB Memory

 

[MENU] key

[BACK] key

[MENU] key

[BACK] key

Firm Update
    From USB Memory

Firm Update

> ********.sfu

Firm Update 
    Reading Data

Firm Update
Writing Data

Firm Update

IcMM

 

Result:OK

 

MX-M1205  IC card reader  23 – 1

MX-M1205

Service Manual

 

MEMO: There are two kinds of card reader holders.

Choose the suitable one according to the card reader to be
installed.

NOTE: Before installation, be sure to turn both the operation and

main power switches off and disconnect the power plug
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.

1)

Remove the screw and remove the upper cabinet front right.
Disconnect the connector from the USB I/F PWB.

2)

Open the clamp and unbind the harness.

1

Non-contact IC card 
reader

RFIDeas

RDR-6081AKU

2

Equitrac

Y591-EHID-201 v01

3

Elatec

TWN3

4

RFIDeas

RDR-7582AKU

1

LHLDZ2231FCZZ

IC card reader holder C(A)

1

2

LHLDZ0172QSZZ

IC card reader holder C(C)

1

3

PTPE-0352FCZZ

Card reader fixing tape 
(Double-stick tape)

2

4

DHAI-4709FCPZ

USB mini harness-AR

1

5

LBNDJ0013FCZ1

Binding band

3

6

XEBS730P08000

Screw (M3 x 8 P tight)

3

7

LHLDW1895FCPZ

Clamp

1

LHLDZ2231FCZZ

IC card reader holder C(A)

RDR-6081AKU, TWN3, 
RDR-7582AKU

LHLDZ0172QSZZ

IC card reader holder C(C)

Y591-EHID-201 v01

1

2

3

4

1

2

3

4

7

5

6

MX-M1205  IC card reader  23 – 2

1)

Attach the card reader fixing tape to the IC card reader holder
referring to the notches as the reference.

NOTE: The holder type and the attachment procedure differ

depending on the kind of the IC card reader.

Vertical and horizontal directions: Fit with the notches.

Vertical direction: Fit with the notch.

Horizontal direction: Fit with the notch and the lower edge.

2)

Cut out the boss.

NOTE: The cutting position of the boss of the IC card reader

holder differs depending on the kind of the IC card
reader.

3)

Attach the IC card reader to the IC card reader holder accord-
ing to the attachment reference ribs.

NOTE: The attachment reference position differs depending

on the kind of the IC card reader.

(No reference position)