Sharp MX-M1055 / MX-M1205 (serv.man2) Service Manual ▷ View online
MX-M1205 MX-TM10 (TRIMMING MODULE) 17 – 4
2)
Connect the connector for the sensor.
3)
Connect the connector for the motor, and fix it with the wire
saddle.
saddle.
4)
Disengage the stopper of the accuride, and pull out the saddle
unit to the maximum extent.
unit to the maximum extent.
5)
Connect the connector at the back of the unit.
6)
Attach the belt (Packed items No.4).
7)
Remove the resin E-ring, the bearing, and the resin washer.
MEMO: Dispose of the resin washer only.
MX-M1205 MX-TM10 (TRIMMING MODULE) 17 – 5
8)
Install in the sequence of the plate (Packed items No.10), the
bearing, and the resin E-ring.
bearing, and the resin E-ring.
NOTE: Turn back the bearing and attach it.
9)
Attach the plate removed in procedure B-3).
10) Attach the upper cover (Packed items No.1).
Insert the trimmer frame into the slit groove of the cover.
11) Lift the communication cable of the saddle unit.
12) Return the saddle unit to the original position.
13) Attach the inside cover.
14) Attach the jam dial (upper) and the jam dial (lower).
15) Attach the front door of the finisher.
16) Attach the dust box holder (Packed items).
MX-M1205 MX-PUX1 (XPS EXPANSION KIT) 18 – 1
MX-M1205
Service Manual
[18] MX-PUX1 (XPS EXPANSION KIT)
1. Unpacking
A. Packed items check
2. Installation
A. Enable setting of functions
1)
Enter the product key to enable the functions.
a)
Enter the system setting mode.
b)
The machine enters the product key input mode.
c)
Enter the product key.
d)
Press the registration key.
2)
After completion of the product key input, turn OFF the power
switch on the operation panel of the machine, and turn OFF
the main power switch.
switch on the operation panel of the machine, and turn OFF
the main power switch.
3)
Turn ON the main power switch and the power switch on the
operation panel.
operation panel.
B. Confirmation of function enable
Execute SIM22-10 (Machine configuration display) to check to con-
firm that the set functions are enable.
firm that the set functions are enable.
No.
Name
Quantity
1
CD-ROM
1
2
Operation manual
1
3
Product key sheet
1
1
2
3
MX-M1205 MX-PF10 (BARCODE FONT KIT) 19 – 1
MX-M1205
Service Manual
[19] MX-PF10 (BARCODE FONT KIT)
1. Unpacking
A. Packed items check
2. Installation
A. Enable setting of functions
1)
Enter the product key to enable the functions.
a)
Enter the system setting mode.
b)
The machine enters the product key input mode.
c)
Enter the product key.
d)
Press the registration key.
2)
After completion of the product key input, turn OFF the power
switch on the operation panel of the machine, and turn OFF
the main power switch.
switch on the operation panel of the machine, and turn OFF
the main power switch.
3)
Turn ON the main power switch and the power switch on the
operation panel.
operation panel.
B. Confirmation of function enable
Execute SIM22-10 (Machine configuration display) to check to con-
firm that the set functions are enable.
firm that the set functions are enable.
No.
Name
Quantity
1
CD-ROM
1
2
Product key sheet
1
Font No.
Font name
1
Code128TT-Regular
2
Code128-NarrowTT-Regular
3
Code128-WideTT-Regular
4
Code39HalfInch-Regular
5
Code39OneInch-Regular
6
Code39QuarterInch-Regular
7
Code39SmallHigh-Regular
8
Code39Slim-Regular
9
Code39SmallLow-Regular
10
Code39SmallMedium-Regular
11
Code39Wide-Regular
12
Codabar-Regular
13
Interleaved2of5-Regular
14
Interleaved2of5-Thin-Regular
15
OCR-A
16
OCR-B
17
OCR-B-C39-Regular
18
UPC-Half
19
UPC-Half-Bars
20
UPC-HalfMusic
21
UPC-HalfNarrow
22
UPC-HalfThin
23
UPC-Tall-Regular
24
UPC-TallBarsThin-regular
25
UPC-TallMusicThin-Regular
26
UPC-TallNarrow-Regular
27
UPC-TallThin-regular
28
ZipCodeBarcode-Regular
1
2
Click on the first or last page to see other MX-M1055 / MX-M1205 (serv.man2) service manuals if exist.