Sharp MX-B200 (serv.man8) User Manual / Operation Manual ▷ View online
4
4
25
This chapter explains basic and other copying functions.
The unit is equipped with a one-page memory buffer. This memory allows the unit to
scan an original once only and make up to 99 copies. This feature improves
workflow, reduces operation noise from the copier, and provides higher reliability by
reducing wear and tear on the scanning mechanism.
The unit is equipped with a one-page memory buffer. This memory allows the unit to
scan an original once only and make up to 99 copies. This feature improves
workflow, reduces operation noise from the copier, and provides higher reliability by
reducing wear and tear on the scanning mechanism.
COPY FLOW
1
Make sure that paper has been loaded in the paper tray (p.10) or
multi-bypass tray (p.12), and check the paper size (p.9).
multi-bypass tray (p.12), and check the paper size (p.9).
If paper is not loaded, see page 10.
2
Place the original.
If you are using the document glass, see "Using the document glass" (p.26).
If you are using the SPF, see "Using the SPF (Peripheral device)" (p.27).
When copying onto paper larger than A4 size, pull out the paper output tray
extension.
If you are using the SPF, see "Using the SPF (Peripheral device)" (p.27).
When copying onto paper larger than A4 size, pull out the paper output tray
extension.
3
Select the copy settings.
• To set the number of copies, see page 28.
• To adjust the resolution and contrast settings, see page 28.
• To enlarge or reduce the copy, see page 30.
• To change the tray used, see page 30.
• To sort multiple original pages into sets, see page 31.
• To copy the front and rear sides of ID card onto a page, see page 34.
• To adjust the resolution and contrast settings, see page 28.
• To enlarge or reduce the copy, see page 30.
• To change the tray used, see page 30.
• To sort multiple original pages into sets, see page 31.
• To copy the front and rear sides of ID card onto a page, see page 34.
4
Start copying.
Press the start (
) key.
COPIER FUNCTIONS
4
26
About interrupt copying
If you press the start (
) key to begin a copy job while a print job using the paper
tray or multi-bypass tray is in progress, the copy job will begin automatically after the
print data in the unit's memory is printed (interrupt copying). When this is done, the
print data remaining in the computer is not sent to the unit. When the copy job ends,
press the clear key twice to change the unit to the online state, or wait until the set
auto clear time (p.63) elapses. The remaining print data will be sent to the unit and
printing will resume.
print data in the unit's memory is printed (interrupt copying). When this is done, the
print data remaining in the computer is not sent to the unit. When the copy job ends,
press the clear key twice to change the unit to the online state, or wait until the set
auto clear time (p.63) elapses. The remaining print data will be sent to the unit and
printing will resume.
ORIGINAL PLACEMENT
Using the document glass
1
Open the original cover/SPF, and place the original.
2
Place an original face down on the document glass. Align it
with the original scale and the centring (
with the original scale and the centring (
) mark. Gently close
the original cover/SPF.
By factory default, when a copy is made with the original/SPF cover open,
the function for preventing excessive toner use activates and "OP" appears
in the display. (See the "Check original cover/SPF open function" (p.62).)
the function for preventing excessive toner use activates and "OP" appears
in the display. (See the "Check original cover/SPF open function" (p.62).)
• If you start a print job while a copy job is in progress, the print job will
begin when the copy job is completed.
• The scanning function cannot be used while a copy job is in progress.
• The document glass can read up to A4 original.
• Image loss 4 mm can occur at the leading and trailing edges of the
• Image loss 4 mm can occur at the leading and trailing edges of the
copies. Also image loss 4.5 mm in total can occur along the other
edges of the copies.
edges of the copies.
• When copying a book or an original which has been folded or a crumpled
original, press down the original cover/SPF lightly. If the original cover/
SPF is not securely closed, the copies may be striped or blurred.
SPF is not securely closed, the copies may be striped or blurred.
• When using the document glass to scan an original, make sure that an
original is not placed in the SPF.
mark
Original scale
4
27
Setting a large original
The original cover can be removed to allow copying of bulky objects.
1
Simply lift the original cover straight
up.
up.
2
To reattach the original cover, reverse the above procedure.
Using the SPF (Peripheral device)
The SPF is designed to hold up to 50 originals measuring from A5 to A4 and weighting
from 56 g/m
from 56 g/m
2
to 90 g/m
2
.
1
Make sure that no original is left on the document glass.
2
Adjust the original guides to the
size of originals.
size of originals.
3
Set the originals face up in the
document feeder tray.
document feeder tray.
Use the peep hole (see the illustration at
right) to check the position of the original.
There is an original top edge mark
right) to check the position of the original.
There is an original top edge mark
▲ in the
peep hole. Align the top edge of the
original with this mark.
original with this mark.
• Before feeding originals in the document feeder tray, be sure to
remove any staples or paper clips from them.
• Before placing curled or wavy originals into the document feeder tray,
be sure to flatten them. If not, original misfeeds may result.
• If the original is placed correctly in the SPF, the SPF indicator will light
up. If the original is not placed correctly, the SPF indicator will not
light. If the SPF is not closed correctly, the indicator will blink.
light. If the SPF is not closed correctly, the indicator will blink.
• Badly damaged originals may misfeed in the SPF. It is recommended
that such originals be copied from the document glass.
• Special originals such as transparency film should not be fed through
the SPF, but should be placed directly on the document glass.
• Image loss (max. 4 mm) can occur at the leading and trailing edges of
the copies. Also image loss (max. 4.5 mm in total) can occur along the
other edges of the copies.
other edges of the copies.
• To stop continuous copying using the SPF, press the clear key.
Original face up
Peep hole
4
28
SET THE COPY QUANTITY
Set the number of copies using the two copy quantity (
,
) keys when copying
from the document glass or copying from SPF.
• Press the right copy quantity key to set the unit digit
from 0 to 9. This key will not change the tens digit.
• Press the left copy quantity key to set the tens digit
from 1 to 9.
EXPOSURE ADJUSTMENT/PHOTO COPYING
Exposure adjustment
Copy density adjustment is not required for most originals in the automatic exposure
mode. To adjust the copy density manually or to copy photographs, the exposure
level can be adjusted in five steps manually.
mode. To adjust the copy density manually or to copy photographs, the exposure
level can be adjusted in five steps manually.
1
Press the exposure mode selector key to
select the MANUAL (
select the MANUAL (
) mode or
PHOTO (
) mode.
2
Use the light (
) and dark (
) keys to
adjust the exposure level. If exposure level
2 is selected, the two left-handmost
indicators for that level will light up
simultaneously. Also, if level 4 is selected,
the two right-handmost indicators for that
level will light up simultaneously.
2 is selected, the two left-handmost
indicators for that level will light up
simultaneously. Also, if level 4 is selected,
the two right-handmost indicators for that
level will light up simultaneously.
• Press the clear key to clear an entry if a mistake is made.
• A single copy can be made with the initial setting, i.e., when "0" is
• A single copy can be made with the initial setting, i.e., when "0" is
displayed.
The copy resolution used for AUTO and MANUAL (
) mode can be
changed. (p.63)
Tens digit
Unit digit
Click on the first or last page to see other MX-B200 (serv.man8) service manuals if exist.