Sharp MX-B200 (serv.man8) User Manual / Operation Manual ▷ View online
3
21
5
Select the printer name (configured as a shared printer).
1
Select the printer name (configured as a shared printer on a print
server) from the list.
In Windows 2000/XP, you can also click the "Add Network Port" button
displayed below the list and select the printer to be shared by browsing
the network in the window that appears.
server) from the list.
In Windows 2000/XP, you can also click the "Add Network Port" button
displayed below the list and select the printer to be shared by browsing
the network in the window that appears.
2
Click the "Next" button.
Follow the on-screen instructions.
6
You will return to the window of step 3. Click the "Close"
button.
button.
7
This completes the installation of the software.
If the shared printer does not appear in the list, check the settings on the
print server.
print server.
• If you are using Windows Vista/7 and a security warning window
appears, be sure to click "Install this driver software anyway".
• If you are running Windows 2000/XP and a warning message appears
regarding the Windows logo test or digital signature, be sure to click
"Continue Anyway" or "Yes".
"Continue Anyway" or "Yes".
After the installation, a message prompting you to restart your computer
may appear. In this case, click the "Yes" button to restart your computer.
may appear. In this case, click the "Yes" button to restart your computer.
3
22
CONFIGURING THE PRINTER DRIVER
After installing the MFP driver, you must configure the printer driver settings
appropriately for the size of paper loaded in each.
appropriately for the size of paper loaded in each.
1
Click the "Start" button, click "Control Panel", and then click
"Printer".
"Printer".
• In Windows 7, click the "start" button and then click "Devices and
Printers".
• In Windows XP, click the "start" button and click "Printers and Faxes".
• In Windows 2000, click the "Start" button, select "Settings", and then click
• In Windows 2000, click the "Start" button, select "Settings", and then click
"Printers".
2
Open the printer properties window.
1
Right-click the printer driver icon of the machine.
2
Select "Properties".
In Windows 7, click the "Printer properties" menu.
3
Click the "Configuration" tab.
4
Click the "Set Tray Status" button and select the size of paper
that is loaded in each tray.
that is loaded in each tray.
Select a tray in the "Paper Source" menu, and select the size of paper
loaded in that tray from the "Set Paper Size" menu. Repeat for each tray.
loaded in that tray from the "Set Paper Size" menu. Repeat for each tray.
5
Click the "OK" button in the "Set Tray Status" window.
6
Click the "OK" button in the printer properties window.
In Windows XP, if "Printers and Faxes" does not appear in the "start"
menu, select "Control Panel", select "Printers and Other Hardware", and
then select "Printers and Faxes".
menu, select "Control Panel", select "Printers and Other Hardware", and
then select "Printers and Faxes".
3
23
SETTING UP BUTTON MANAGER
Button Manager is a software program that works with the scanner driver to enable
scanning from the machine.
To scan using the machine, Button Manager must be linked with the scan menu on
the machine. Follow the steps below to link Button Manager to scanner events.
scanning from the machine.
To scan using the machine, Button Manager must be linked with the scan menu on
the machine. Follow the steps below to link Button Manager to scanner events.
Windows XP/Vista/7
1
Click the "Start" button, click "Control Panel", click "Hardware
and Sound", and then click "Scanners and Cameras".
and Sound", and then click "Scanners and Cameras".
• In Windows 7, click the "start" button and then click "Devices and Printers".
• In Windows XP, click the "start" button, select "Control Panel" and click
• In Windows XP, click the "start" button, select "Control Panel" and click
"Printers and Other Hardware", and then click "Scanners and Cameras".
2
Click the "SHARP MX-xxxx" icon and select "Properties".
• In Windows 7, right-click the "SHARP MX-xxxx" icon and select "Scan properties".
• In Windows XP, select "Properties" from the "File" menu.
• In Windows XP, select "Properties" from the "File" menu.
3
In the "Properties" screen, click the "Events" tab.
4
Select "SC1:" from the "Select an event"
pull-down menu.
pull-down menu.
5
Select "Start this program" and then select
"Sharp Button Manager Y" from the
pull-down menu.
"Sharp Button Manager Y" from the
pull-down menu.
6
Repeat Steps 4 and 5 to link Button Manager to "SC2:" through
"SC6:".
"SC6:".
Select "SC2:" from the "Select an event" pull-down menu. Select "Start this
program", select "Sharp Button Manager Y" from the pull-down menu. Do
the same for each ScanMenu through "SC6:".
program", select "Sharp Button Manager Y" from the pull-down menu. Do
the same for each ScanMenu through "SC6:".
7
Click the "OK" button.
Button Manager is now linked to the scan menu (1 through 6).
The scan settings for each of scan menu 1 through 6 can be changed with
the setting window of Button Manager.
For the factory default settings of the scan menu and the procedures for
configuring Button Manager settings, see "Button Manager settings" (p.52).
The scan settings for each of scan menu 1 through 6 can be changed with
the setting window of Button Manager.
For the factory default settings of the scan menu and the procedures for
configuring Button Manager settings, see "Button Manager settings" (p.52).
3
24
Windows 2000
1
Click the "Start" button, select "Settings", and then click
"Control Panel".
"Control Panel".
2
Double-click the "Scanners and Cameras" icon.
3
Select "SHARP MX-xxxx" and click the "Properties" button.
4
In the "Properties" screen, click the "Events" tab.
5
Select "SC1:" from the "Scanner events"
pull-down menu.
pull-down menu.
6
Select "Sharp Button Manager Y" in "Send
to this application".
to this application".
7
Click the "Apply" button.
8
Repeat Steps 5 through 7 to link Button Manager to "SC2:"
through "SC6:".
through "SC6:".
Select "SC2:" from the "Scanner events" pull-down menu. Select "Sharp
Button Manager Y" in "Send to this application" and click the "Apply" button.
Do the same for each ScanMenu through "SC6:".
When the settings have been completed, click the "OK" button to close the
screen.
Button Manager Y" in "Send to this application" and click the "Apply" button.
Do the same for each ScanMenu through "SC6:".
When the settings have been completed, click the "OK" button to close the
screen.
Button Manager is now linked to the scan menu (1 through 6).
The scan settings for each of scan menu 1 through 6 can be changed with
the setting window of Button Manager.
For the factory default settings of the scan menu and the procedures for
configuring Button Manager settings, see "Button Manager settings" (p.52).
The scan settings for each of scan menu 1 through 6 can be changed with
the setting window of Button Manager.
For the factory default settings of the scan menu and the procedures for
configuring Button Manager settings, see "Button Manager settings" (p.52).
If other applications are shown,
deselect the checkboxes for the other
applications and leave only the Button
Manager checkbox selected.
deselect the checkboxes for the other
applications and leave only the Button
Manager checkbox selected.
Click on the first or last page to see other MX-B200 (serv.man8) service manuals if exist.