Sharp MX-B200 (serv.man8) User Manual / Operation Manual ▷ View online
2
2
9
Follow the steps below to load paper into the tray.
PAPER
For best results, use only paper recommended by SHARP.
*1 Do not use non-standard envelopes, and envelopes that have metal clasps,
plastic snappers, string closures, windows, linings, self-adhesive, patches or
synthetic materials. Do not use envelopes that are filled with air or envelopes that
have labels or stamps attached. These will cause physical damage to the unit.
synthetic materials. Do not use envelopes that are filled with air or envelopes that
have labels or stamps attached. These will cause physical damage to the unit.
*2 For paper weighing from 105 g/m
2
to 128 g/m
2
, A4 is the maximum size that can be
fed through the multi-bypass tray.
• Special papers such as transparency film, labels and envelopes must be fed one
sheet at a time through the multi-bypass tray.
Type of paper
feeding
Type of media
Size
Weight
Paper tray
Standard paper
A4
A5
B5
Letter
Legal
Invoice
A5
B5
Letter
Legal
Invoice
56 g/m
2
to
80 g/m
2
Multi-bypass
tray
tray
Standard paper and
thick paper
thick paper
A4
A5
A6
B5
Letter
Legal
Invoice
A5
A6
B5
Letter
Legal
Invoice
56 g/m
2
to
128 g/m
2
*
2
Special
media
media
Transparency
film
film
A4
Letter
Letter
Envelope*
1
International DL
International C5
Commercial 10
Monarch
International C5
Commercial 10
Monarch
LOADING PAPER
2
10
LOADING THE PAPER TRAY
1
Raise the handle of the paper tray
and pull the paper tray out until it
stops.
and pull the paper tray out until it
stops.
2
Adjust the paper guides on the paper tray to the copy paper
width and length. Squeeze the lever of paper guide
width and length. Squeeze the lever of paper guide
and slide
the guide to match with the width of the paper. Move paper
guide
guide
to the appropriate slot as marked on the tray.
3
Fan the paper and insert it into the tray. Make sure the edges go
under the corner hooks.
under the corner hooks.
Do not load paper above the maximum height line (
). Exceeding
the line will cause a paper misfeed.
A
B
Paper
guide B
guide B
Paper
guide A
guide A
2
11
4
Gently push the paper tray back into the unit.
• Be sure that paper is free of rips, dust, wrinkles, and curled or bent
edges.
• Make sure all the paper in the stack is the same size and type.
• When loading paper, ensure there is no space between the paper and
• When loading paper, ensure there is no space between the paper and
the guide, and check if the guide is not set too narrow causing the
paper to bend. Loading paper in these ways will result in document
skew or a paper jam.
paper to bend. Loading paper in these ways will result in document
skew or a paper jam.
• When not using the unit for an extended period, remove all paper from
the paper tray and store it in a dry place. If paper is left in the unit for
an extended period, the paper will absorb moisture from the air,
resulting in paper jams.
an extended period, the paper will absorb moisture from the air,
resulting in paper jams.
• When adding new paper to the paper tray, remove the old paper
already contained in the tray. Placing new paper on top of the paper
already contained in the tray may result in feeding two sheets at one
time.
already contained in the tray may result in feeding two sheets at one
time.
• If output paper curls, it may help to turn the paper over when loading it
in the tray.
2
12
BYPASS FEED (including special paper)
The multi-bypass tray can be used to feed standard paper, transparency film, labels,
envelopes, and other special purpose paper. Paper measuring from A6 to A4
and in the weight range of 56 g/m
envelopes, and other special purpose paper. Paper measuring from A6 to A4
and in the weight range of 56 g/m
2
to 128 g/m
2
can be used in this tray. (For paper
weighing from 105 g/m
2
to 128 g/m
2
, A4 is the maximum size.)
The multi-bypass tray
1
Open the multi-bypass tray and extend the tray.
• The multi-bypass tray can hold maximum of 50 sheets of paper.
(Capacity will vary depending on the type of paper loaded.)
• The original image must be smaller than the paper or media for
copying. If the original image is bigger than the paper or media, this
may cause smudges on the edges of the copies.
may cause smudges on the edges of the copies.
To close the multi-bypass tray, perform step
and then step
in the illustration and push the round projections at the right
of the tray until they click.
1
2
1
2
Click on the first or last page to see other MX-B200 (serv.man8) service manuals if exist.