Sharp MX-B200 (serv.man8) User Manual / Operation Manual ▷ View online
4
29
Automatic exposure adjustment
The automatic exposure level can be adjusted to suit your copying needs. This level is
set for copying from the document glass and copying from the SPF respectively.
set for copying from the document glass and copying from the SPF respectively.
1
When adjusting the automatic exposure level for copying from
the SPF, place an original in the document feeder tray and
make sure that the SPF indicator lights up. When adjusting the
level for copying from the document glass, make sure that no
original is left in the document feeder tray.
the SPF, place an original in the document feeder tray and
make sure that the SPF indicator lights up. When adjusting the
level for copying from the document glass, make sure that no
original is left in the document feeder tray.
2
Press the exposure mode selector key to
select the PHOTO (
select the PHOTO (
) mode.
3
Press and hold down the exposure mode
selector key for approximately 5 seconds.
The PHOTO (
selector key for approximately 5 seconds.
The PHOTO (
) indicator will go out and
the AUTO indicator will begin to blink. One
or two light and dark indicators
corresponding to the automatic exposure
level which has been selected will light up.
or two light and dark indicators
corresponding to the automatic exposure
level which has been selected will light up.
4
Press the light (
) or dark (
) key to
lighten or darken the automatic exposure
level as desired. If exposure level 2 is
selected, the two left-handmost indicators
for that level will light up simultaneously.
Also, if level 4 is selected, the two right-
handmost indicators for that level will
light up simultaneously.
level as desired. If exposure level 2 is
selected, the two left-handmost indicators
for that level will light up simultaneously.
Also, if level 4 is selected, the two right-
handmost indicators for that level will
light up simultaneously.
5
Press the exposure selector key. The AUTO indicator will stop
blinking and light up steadily.
blinking and light up steadily.
This automatic exposure level will remain in effect until you change it
again by this procedure.
again by this procedure.
4
30
REDUCTION/ENLARGEMENT/ZOOM
Three preset reduction ratios and two enlargement ratios can be selected. The zoom
function enables copy ratio selection from 25% to 400% in 1% increments. (When
the SPF is being used, the zoom copy ratio range is 50% to 200%.)
function enables copy ratio selection from 25% to 400% in 1% increments. (When
the SPF is being used, the zoom copy ratio range is 50% to 200%.)
1
Set the original and check the paper size.
2
Use the copy ratio selector key and/or ZOOM (
,
) keys to
select the desired copy ratio.
3
Set the reduction/enlargement ratio.
To select a preset copy ratio:
Preset reduction and enlargement ratios are:
50%, 70%, 86%, 141%, and 200% .
Preset reduction and enlargement ratios are:
50%, 70%, 86%, 141%, and 200% .
To select a zoom ratio:
When a ZOOM (
When a ZOOM (
or
) key is pressed, the
ZOOM indicator will light up and the zoom ratio will
be displayed in the display.
be displayed in the display.
SELECTING THE TRAY
Press the tray select (
) key.
Each time you press the tray select (
) key, the location
indicated by the paper feed location indicator changes in
the following order: paper tray 1, paper tray 2*, multi-bypass
tray.
the following order: paper tray 1, paper tray 2*, multi-bypass
tray.
* Peripheral device
• To verify a zoom setting without changing the zoom ratio,
press and hold down the copy ratio display (%) key. When the
key is released, the display will return to the copy quantity
display.
key is released, the display will return to the copy quantity
display.
• To reset the ratio to 100%, press the copy ratio selector key
repeatedly until the 100% indicator lights up.
To decrease or increase the zoom ratio rapidly, press and hold
down the ZOOM (
down the ZOOM (
) or (
) key. However the value will
stop at the preset reduction or enlargement ratios. To move
beyond these ratios, release the key and then press and hold it
down again.
beyond these ratios, release the key and then press and hold it
down again.
4
31
SORT COPY
Copies of multiple original pages can be sorted into sets.
Using the document glass
1
Place the first original. (p.26)
2
Select the Sort key to select the sort mode.
3
Set the number of copies and other settings, and then press the
start (
start (
) key.
The Sort indicator blinks, and the original is scanned into memory.
4
When the start indicator lights, replace the original with the
next original, and then press the start (
next original, and then press the start (
) key.
Repeat step 4 until all originals have been scanned into memory.
5
When all originals have been scanned, and then press the
READ-END key.
READ-END key.
The copies are delivered to the paper output tray.
The number of pages that can be scanned varies depending on the
original type (photo, text, etc.) and the amount of memory allocated to
the printer. The amount of memory allocated to the printer can be
changed with "Memory for printer" in the user programs. (p.63)
original type (photo, text, etc.) and the amount of memory allocated to
the printer. The amount of memory allocated to the printer can be
changed with "Memory for printer" in the user programs. (p.63)
To clear the data in memory, press the clear key.
4
32
Using the SPF (Peripheral device)
1
Place the originals. (p.27)
Sort mode is normally the default output mode, and thus the SPF and Sort
indicators light up.
indicators light up.
2
Press the Sort key to select the sort mode.
3
Set the number of copies and other settings, and then press the
start (
start (
) key.
The copies are delivered to the paper output tray.
• If "Sort auto select" has been set to "2: OFF" in the user programs,
follow the steps below to select sort mode.
• "Sort auto select" can also be used to change the default output mode
(p.63).
• To cancel the Sort copy job, press the clear key.
• To cancel Sort mode, press the Sort key repeatedly until the Sort
• To cancel Sort mode, press the Sort key repeatedly until the Sort
indicator is off.
Click on the first or last page to see other MX-B200 (serv.man8) service manuals if exist.