Sharp MX-B200 (serv.man8) User Manual / Operation Manual ▷ View online
4
33
If the memory becomes full
• If the memory becomes full while scanning the originals, "FUL" will appear in the
display, and the machine will stop copying.
• To copy the originals that have been scanned up to that point, press the start (
)
key.
• To clear the data that has been scanned into memory, press the clear key.
4
34
ID CARD COPY
You can copy the front and reverse sides of ID card onto a page through this
function. The ID card print image is shown as follows.
function. The ID card print image is shown as follows.
1
Press the ID CARD key.
• The ID CARD indicator will light up. The
exposure is set to "text", the exposure level is set
to "3", and the number is set to "1" automatically.
to "3", and the number is set to "1" automatically.
• The multi-bypass tray is automatically selected
when ID card copy feature is selected. The tray
can be changed manually with the tray select key.
can be changed manually with the tray select key.
2
Place the ID card on the document glass,
align with the ID card mark, and press the
start (
align with the ID card mark, and press the
start (
) key.
When scan is finished, ID CARD indicator will blink
and one side of the ID card is scanned into
memory. (In this case, print will start if pressing
READ-END key.)
and one side of the ID card is scanned into
memory. (In this case, print will start if pressing
READ-END key.)
3
Turn and replace the ID card on the document glass, and press
the start (
the start (
) key.
When scan finished, Copy will begin.
• ID card copy feature cannot be used in combination with sort function.
• The following paper sizes can be used: A5R, A4, B5, 16K. (A5R can
• The following paper sizes can be used: A5R, A4, B5, 16K. (A5R can
only be used in bypass tray.)
• The image may cut off even if using standard paper size.
• In ID card copy mode, scan area and scan number (1 page) cannot be
• In ID card copy mode, scan area and scan number (1 page) cannot be
changed. Scan area is:
X: 54 + 5 mm (margin),
Y: 86 + 10 mm (top margin 5 mm and bottom margin 5 mm).
X: 54 + 5 mm (margin),
Y: 86 + 10 mm (top margin 5 mm and bottom margin 5 mm).
• Only making a single copy is available (Number of copies cannot be
set.).
To cancel ID card copy, press the clear key and make sure the ID CARD
indicator is off.
indicator is off.
Front
Back
Originals
Copies
ID CARD mark
5
5
35
This chapter explains how to use the printer functions.
The procedure for loading paper is the same as for loading copy paper. See
"LOADING PAPER" (p.9).
The procedure for loading paper is the same as for loading copy paper. See
"LOADING PAPER" (p.9).
BASIC PRINTING
The following example explains how to print a document from WordPad.
Before printing, make sure that the correct size of paper for your document has been
loaded in the machine.
Before printing, make sure that the correct size of paper for your document has been
loaded in the machine.
1
Start WordPad and open the document that you wish to print.
2
Select "Print" from the application's "File"
menu.
menu.
If you are using Windows 7, click the
button.
• If copying is being performed when printing is started, copying will
continue. After copying is complete, printing will be executed when the
clear key is pressed twice or approximately 60 seconds (auto clear
time)* elapse.
* The auto clear time varies with a user program setting. See "USER
clear key is pressed twice or approximately 60 seconds (auto clear
time)* elapse.
* The auto clear time varies with a user program setting. See "USER
PROGRAMS" (p.63).
• Preheat mode and auto power shut-off mode will be cancelled when
printing is started.
• If the paper size specified from the software application is larger than
the paper size in the printer, part of the image that is not transferred to
the paper may remain on the surface of the drum. In this case, the
rear side of the paper may become dirty. If this occurs, change to the
correct size paper and print two or three pages to clean the image.
the paper may remain on the surface of the drum. In this case, the
rear side of the paper may become dirty. If this occurs, change to the
correct size paper and print two or three pages to clean the image.
The menu used to execute printing
may vary depending on the software
application.
may vary depending on the software
application.
PRINTER FUNCTIONS
5
36
3
Make sure that "SHARP MX-xxxx" is selected as the printer.
If you need to change any print
settings, click the "Preferences"
button to open the printer driver
setup screen.
settings, click the "Preferences"
button to open the printer driver
setup screen.
Windows 2000 does not have the "Preferences" button in this dialog box.
Select settings as needed on each of the tabs in the setup screen and click
the "OK" button.
"PRINTER DRIVER SETTING SCREEN" (p.38)
"SETTING ADVANCED PRINT FUNCTIONS" (p.39)
Select settings as needed on each of the tabs in the setup screen and click
the "OK" button.
"PRINTER DRIVER SETTING SCREEN" (p.38)
"SETTING ADVANCED PRINT FUNCTIONS" (p.39)
4
Click the "Print" button.
Printing begins. When printing begins, the Print Status Window
automatically opens.
"OUTLINE OF THE PRINT STATUS WINDOW" (p.47)
The print job will be delivered to the output tray.
automatically opens.
"OUTLINE OF THE PRINT STATUS WINDOW" (p.47)
The print job will be delivered to the output tray.
Pausing a print job
To pause a print job during printing, press the clear key on the operation panel to
switch the machine off-line.
• To cancel the print job, press the clear key once and then press it again within 5
switch the machine off-line.
• To cancel the print job, press the clear key once and then press it again within 5
seconds.
• If 5 seconds elapses after the first time the clear key is pressed, printing will
automatically resume.
The button that is used to open the printer driver properties window
(usually "Properties" or "Printing Preferences") may vary depending on
the software application.
(usually "Properties" or "Printing Preferences") may vary depending on
the software application.
Click on the first or last page to see other MX-B200 (serv.man8) service manuals if exist.