Sharp MX-B200 (serv.man8) User Manual / Operation Manual ▷ View online
1
5
OPERATION PANEL
Sort key and indicators
Use to select sort mode.
Use to select sort mode.
Exposure mode selector key and
indicators
Use to sequentially select the exposure
modes: AUTO, MANUAL or PHOTO.
Selected mode is shown by a lit
indicator. (p.28)
indicators
Use to sequentially select the exposure
modes: AUTO, MANUAL or PHOTO.
Selected mode is shown by a lit
indicator. (p.28)
Light and dark keys and indicators
Use to adjust the MANUAL or PHOTO
exposure level. Selected exposure level
is shown by a lit indicator. (p.28) Use to
start and terminate user program
setting. (p.63)
Use to adjust the MANUAL or PHOTO
exposure level. Selected exposure level
is shown by a lit indicator. (p.28) Use to
start and terminate user program
setting. (p.63)
Alarm indicators
Developer replacement required
indicator (p.86)
indicator (p.86)
Misfeed indicator (p.80)
Toner cartridge replacement
required indicator (p.66)
required indicator (p.66)
Maintenance
indicator (p.86)
SPF indicator*
1
(p.27)
SPF misfeed indicator*
1
(p.84)
Copy ratio selector key*
3
and
indicators
Use to sequentially select preset
reduction/enlargement copy ratios.
Selected copy ratio is shown by a lit
indicator. (p.30)
Use to sequentially select preset
reduction/enlargement copy ratios.
Selected copy ratio is shown by a lit
indicator. (p.30)
1
2
3
4
5
6
7
Copy ratio display (%) key/
READ-END key
• Use to verify a zoom setting without
READ-END key
• Use to verify a zoom setting without
changing the zoom ratio. (p.30)
• Use to check the number of originals
that must be returned to the document
feeder tray if a misfeed occurs in the
machine when the SPF is used. (p.85)
feeder tray if a misfeed occurs in the
machine when the SPF is used. (p.85)
• Use to terminate reading originals in
sort mode. (p.31)
Display
Displays the specified copy quantity,
zoom copy ratio, user program code
and error code.
Displays the specified copy quantity,
zoom copy ratio, user program code
and error code.
SCAN key and indicator
(p.6, p.50)
(p.6, p.50)
ID CARD key and indicator
Use to copy ID card. For description,
see "ID CARD COPY" (p.34).
Use to copy ID card. For description,
see "ID CARD COPY" (p.34).
Start key and indicator
• Copying is possible when the
• Copying is possible when the
indicator is on.
• Press to start copying
• Use to set a user program. (p.63)
• Use to set a user program. (p.63)
Power save indicator
Lights up when the unit is in a power
save mode. (p.61, p.63)
Lights up when the unit is in a power
save mode. (p.61, p.63)
Tray select key
Use to select a paper feed station
(paper tray 1, paper tray 2*
Use to select a paper feed station
(paper tray 1, paper tray 2*
2
or multi-
bypass tray). (p.30)
Paper feed location indicators
Light up to show the selected paper
feed station.
Light up to show the selected paper
feed station.
*1 Only operates when an SPF is
installed.
*2 Peripheral device
*3 The indicators of the operation panel
*3 The indicators of the operation panel
may differ depending on the country
and region.
and region.
8
9
10
11
12
13
14
15
1
6
INDICATORS ON THE OPERATION PANEL
The start (
) indicator indicates the state of the printer or scanner.
Start indicator
On:
Indicates the unit is ready for copying or scanning is being performed.
Blinking: The indicator blinks in the following situations:
• When a print job is interrupted.
• When reserving a copy job.
• When toner is being replenished during a copy or print job.
• When reserving a copy job.
• When toner is being replenished during a copy or print job.
Off:
The indicator is off in the following situations:
• During copying or scanning.
• The unit is in the auto power shut-off mode.
• When a misfeed or error has occurred.
• During print online.
• During copying or scanning.
• The unit is in the auto power shut-off mode.
• When a misfeed or error has occurred.
• During print online.
Power save indicator
On:
Indicates the unit is in a power save mode.
Blinking: Indicates that the unit is initializing (when the side cover is opened and
closed or the power turned off and on).
SCAN indicator
On:
The SCAN (
) key has been pressed and the unit is in scanner mode.
Blinking: A scan job is being executed from the computer, or scan data is stored
in the unit's memory.
Off:
The unit is in the copy mode.
ZOOM keys and indicator
Use to select any reduction or
enlargement copy ratio from 25% to
400% in 1% increments. (When the
SPF is being used, the zoom copy ratio
range is 50% to 200%.) (p.30)
Use to select any reduction or
enlargement copy ratio from 25% to
400% in 1% increments. (When the
SPF is being used, the zoom copy ratio
range is 50% to 200%.) (p.30)
Copy quantity keys
• Use to select the desired copy
• Use to select the desired copy
quantity (1 to 99). (p.28)
• Use to make user program entries.
(p.63)
16
17
Clear key
• Press to clear the display, or press
• Press to clear the display, or press
during a copy run to terminate
copying. (p.28)
copying. (p.28)
• Press and hold down during standby
to display the total number of copies
made to date. (p.64)
made to date. (p.64)
18
Power save indicator
Start indicator
SCAN indicator
1
7
POWER ON
Turn the power switch on the left side of the unit to the "ON" position. The start (
)
indicator will light up and other indicators which show the initial settings of the
operation panel will also light up to indicate the ready condition. For the initial
settings, see "Initial settings of operation panel" (p.8).
operation panel will also light up to indicate the ready condition. For the initial
settings, see "Initial settings of operation panel" (p.8).
About the scan head
The scan head lamp remains on constantly when the unit is in the ready condition
(when the start (
(when the start (
) indicator is illuminated).
The unit adjusts the scan head lamp periodically to maintain copying quality. At this
time, the scan head moves automatically. This is normal and does not indicate unit
trouble.
time, the scan head moves automatically. This is normal and does not indicate unit
trouble.
• The unit will enter a power save mode once the set time has elapsed
without any unit operation. The settings of the power save modes can
be modified. See "USER PROGRAMS" (p.63).
be modified. See "USER PROGRAMS" (p.63).
• The unit will return to the initial settings a preset amount of time after
the end of a job. The preset amount of time (auto clear time) can be
changed. See "USER PROGRAMS" (p.63).
changed. See "USER PROGRAMS" (p.63).
1
8
Initial settings of operation panel
When the unit power is on, the operation panel will revert to the initial settings when
the time set with the "Auto clear time" setting (p.63) elapses after a job is finished, or
when the clear key is pressed twice.
The initial settings of the operation panel are shown below.
the time set with the "Auto clear time" setting (p.63) elapses after a job is finished, or
when the clear key is pressed twice.
The initial settings of the operation panel are shown below.
When copying has begun in this state, the settings in the following table are used.
Power off methods
If not used for a certain period of time, the unit will automatically enter auto power
shut-off mode (p.61) in order to minimize power consumption. In cases where the
machine will not be used for a long time, turn off the power switch and remove the
power cord from the outlet.
shut-off mode (p.61) in order to minimize power consumption. In cases where the
machine will not be used for a long time, turn off the power switch and remove the
power cord from the outlet.
Copy quantity
1 copy
Exposure adjustment
AUTO
Zoom
100%
Tray
Paper tray 1
"0" is displayed in the display.
Click on the first or last page to see other MX-B200 (serv.man8) service manuals if exist.