DOWNLOAD Sony DVP-S533D Service Manual ↓ Size: 26.59 MB | Pages: 93 in PDF or view online for FREE

Model
DVP-S533D
Pages
93
Size
26.59 MB
Type
PDF
Document
Service Manual
Brand
Device
DVD
File
dvp-s533d.pdf
Date

Sony DVP-S533D Service Manual ▷ View online

MICROFILM
SERVICE MANUAL
PX Model
CD/DVD PLAYER
DVP-S533D
RMT-D108A
SPECIFICATIONS
CD/DVD player
Laser
Semiconductor laser
Signal format system
NTSC
Audio characteristics
Frequency response
DVD (PCM 96 kHz): 2 Hz to 44 kHz
(±1 dB)*
DVD (PCM 48 kHz): 2 Hz to 22 kHz
(±0.5 dB)
CD: 2 Hz to 20 kHz (±0.5 dB)
Signal-to-noise ratio
More than 115 dB (LINE OUT (AUDIO 1,
2) connectors only)
Harmonic distortion
Less than 0.0025%
Dynamic range
More than 100 dB (DVD)
More than 97 dB (CD)
Wow and flutter
Less than detected value
(±0.001% W PEAK)
Outputs and inputs
Jack
Output
Load impedance
type
level
LINE OUT
Phono
2 Vrms
Over 10 kilohms
(AUDIO 1, 2)
jacks
(at 50 kilohms)
DIGITAL OUT
Optical
–18 dBm
Wave length: 660 nm
(OPTICAL)
output
connector
DIGITAL OUT
Phono
0.5 Vp-p
75 ohms terminated
(COAXIAL)
jack
LINE OUT
Phono
1.0 Vp-p
75 ohms,
(VIDEO 1, 2)
jacks
sync negative
S VIDEO OUT
4-pin
Y: 1.0 Vp-p
75 ohms,
(1, 2)
mini DIN
sync negative
C: 0.286 Vp-p
75 ohms terminated
COMPONENT
phono
Y: 1.0 Vp-p
75 ohms,
VIDEO OUT
jacks
sync negative
(Y, P
B
/B-Y,
P
B
/B-Y,
P
R
/R-Y)
P
R
/R-Y:
0.7 Vp-p
75 ohms
PHONES
Phone
12 mW
32 ohms
jack
5.1CH
Phono
2 Vrms
Over 10 kilohms
OUTPUT
jacks
(at 50 kilohms)
General
Power requirements
110 to 240 V AC, 50/60 Hz
Power consumption
16 W
Dimensions (approx.)
430 
×
 95 
×
 305 mm
(17 
×
 3
3
/
4
 
×
 12 in.) (w/h/d)
incl. projecting parts
Mass (approx.)
3.4 kg (7 lb 8 oz)
Operating temperature
41
°
F to 95
°
F (5
°
C to 35
°
C)
Operating humidity
5% to 90%
Supplied accessories
• Audio/Video/S-link connecting cord (1)
• S video cable (1)
• Plug adaptor (1)
• Remote commander (remote) RMT-D108A (1)
• Size AA (R6) batteries (2)
* The signals from LINE OUT (AUDIO 1, 2) connectors and 5.1 ch L, R
connectors are measured. When you play the PCM sound tracks with
96 kHz sampling frequency, the output signals from the DIGITAL OUT
(OPTICAL, COAXIAL) are converted to 48 kHz (sampling fre-
quency).
Design and specifications are subject to change without notice.
– 2 –
LEAKAGE TEST
The AC leakage from any exposed metal part to earth ground
and from all exposed metal parts to any exposed metal part having
a return to chassis, must not exceed 0.5 mA (500 microamperes).
Leakage current can be measured by any one of three methods.
1. A commercial leakage tester, such as the Simpson 229 or RCA
WT-540A.  Follow the manufacturers' instructions to use these
instruments.
2. A battery-operated AC milliammeter.  The Data Precision 245
digital multimeter is suitable for this job.
3. Measuring the voltage drop across a resistor by means of a
VOM or battery-operated AC voltmeter.  The “limit” indica-
tion is 0.75V, so analog meters must have an accurate low-
voltage scale.  The Simpson 250 and Sanwa SH-63Trd are ex-
amples of a passive VOM that is suitable.  Nearly all battery
operated digital multimeters that have a 2V AC range are suit-
able.  (See Fig. A)
Fig. A
Using AC voltmeter to check AC leakage
1.5 k
0.15 
µ
F
AC
Voltmeter
(0.75 V)
To Exposed Metal
Parts on Set
Earth Ground
WARNING!!
WHEN  SERVICING,  DO  NOT  APPROACH  THE  LASER
EXIT  WITH  THE  EYE  TOO  CLOSELY.  IN  CASE  IT  IS
NECESSARY  TO  CONFIRM  LASER  BEAM  EMISSION,
BE  SURE  TO  OBSERVE  FROM  A  DISTANCE  OF
MORE   THAN   25  cm  FROM  THE  SURFACE  OF  THE
OBJECTIVE  LENS  ON  THE  OPTICAL  PICK-UP  BLOCK.
CAUTION:
The use of optical instrument with this product will increase eye
hazard.
1. Check the area of your repair for unsoldered or poorly-sol-
dered connections.  Check the entire board surface for solder
splashes and bridges.
2. Check the interboard wiring to ensure that no wires are
“pinched” or contact high-wattage resistors.
3. Look for unauthorized replacement parts, particularly transis-
tors, that were installed during a previous repair.  Point them
out to the customer and recommend their replacement.
4. Look for parts which, though functioning, show obvious signs
of deterioration.  Point them out to the customer and recom-
mend their replacement.
5. Check the line cord for cracks and abrasion. Recommend the
replacement of any such line cord to the customer.
6. Check the B+ voltage to see it is at the values specified.
7. Check the antenna terminals, metal trim, “metallized” knobs,
screws, and all other exposed metal parts for AC leakage.
Check leakage as described below.
SAFETY CHECK-OUT
After correcting the original service problem, perform the following
safety checks before releasing the set to the customer:
SAFETY-RELATED  COMPONENT  WARNING!!
COMPONENTS  IDENTIFIED  BY  MARK  
!
  OR  DOTTED
LINE  WITH  MARK  
!
  ON  THE  SCHEMATIC  DIAGRAMS
AND  IN  THE  PARTS  LIST  ARE  CRITICAL  TO  SAFE
OPERATION.  REPLACE  THESE  COMPONENTS  WITH
SONY  PARTS  WHOSE  PART  NUMBERS  APPEAR  AS
SHOWN  IN  THIS  MANUAL  OR  IN  SUPPLEMENTS  PUB-
LISHED  BY  SONY.
CAUTION
Use of controls or adjustments or performance of procedures
other than those specified herein may result in hazardous ra-
diation exposure.
– 3 –
Service Note ............................................................................ 4
1.
GENERAL
This Player Can Play the Following Discs .................... 1-1
Getting Started .............................................................. 1-1
Playing Discs ................................................................. 1-3
Using Various Functions with the Control Menu ........... 1-5
Settings and Adjustments ............................................. 1-10
Additional Information ................................................... 1-13
2.
DISASSEMBLY
2-1.
Case Removal ............................................................... 2-1
2-2.
MB-85 Board Removal .................................................. 2-1
2-3.
Power Block Removal ................................................... 2-1
2-4.
AU-212 Board Removal ................................................ 2-1
2-5.
Tray Cover Removal ..................................................... 2-2
2-6.
Front Panel Removal .................................................... 2-2
2-7.
Mechanism Deck Removal ........................................... 2-2
2-8.
Tray Removal ................................................................ 2-2
2-9.
Optical Pick-up Removal ............................................... 2-3
2-10. Belt, Loading Motor (M001),
MS-46, TK-51 Board Removal ...................................... 2-3
2-11. Internal View .................................................................. 2-4
2-12. Circuit Boards Location ................................................. 2-5
3.
BLOCK DIAGRAMS
3-1.
Overall Block Diagram .................................................. 3-1
3-2.
RF/Servo Block Diagram .............................................. 3-3
3-3.
Signal Process/Video Block Diagram ........................... 3-5
3-4.
System Control Block Diagram ..................................... 3-7
3-5.
Audio (1) Block Diagram ............................................... 3-9
3-6.
Audio (2) Block Diagram ............................................... 3-11
3-7.
Interface Control Block Diagram ................................... 3-13
3-8.
Power Block Diagram .................................................... 3-15
4.
PRINTED WIRING BOARDS AND SCHEMATIC
DIAGRAMS
4-1.
Frame Schematic Diagram ........................................... 4-3
4-2.
Printed Wiring Boards and Schematic Diagrams ......... 4-7
TK-51 (RF/SERVO) Printed Wiring Board .................... 4-7
TK-51 (RF/SERVO) Schematic Diagram ...................... 4-11
MS-46 (LOADING) Printed Wiring Board and
Schematic Diagram ....................................................... 4-13
MB-85 (SIGNAL PROCESS/SERVO)
Printed Wiring Board ..................................................... 4-15
MB-85 (AV DECODER) Schematic Diagram ................ 4-19
MB-85 (SDRAM) Schematic Diagram .......................... 4-21
MB-85 (SERVO DSP) Schematic Diagram .................. 4-23
MB-85 (DRIVE) Schematic Diagram ............................ 4-25
MB-85 (ARP) Schematic Diagram ................................ 4-27
MB-85 (SYSTEM CONTROL) Schematic Diagram ...... 4-29
MB-85 (HGA) Schematic Diagram ................................ 4-31
MB-85 (CLOCK GENERATOR, AUDIO DSP)
Schematic Diagram ....................................................... 4-33
MB-85 (DAC) Schematic Diagram ................................ 4-35
MB-85 (BIAS) Schematic Diagram ............................... 4-37
AU-212 (AUDIO, VIDEO BUFFER)
Printed Wiring Board ..................................................... 4-39
AU-212 (AUDIO) Schematic Diagram .......................... 4-41
AU-212 (VIDEO BUFFER) Schematic Diagram ........... 4-43
FL-101 (FUNCTION SWITCH, IF CON)
Printed Wiring Board ..................................................... 4-45
FL-101 (FUNCTION SWITCH) Schematic Diagram .... 4-47
FL-101 (IF CON) Schematic Diagram .......................... 4-49
HP-111 (HEADPHONE) Printed Wiring Board
and Schematic Diagram ................................................ 4-51
SW-317 (SURROUND SWITCH), FR-150
(IR/POWER SWITCH) Printed Wiring Boards .............. 4-52
SW-317 (SURROUND SWITCH), FR-150
(IR/POWER SWITCH) Schematic Diagram ................. 4-53
HS-030SF (SWITCHING REGULATOR)
Printed Wiring Board ..................................................... 4-55
HS-030SF (SWITCHING REGULATOR)
Schematic Diagram ....................................................... 4-57
5.
IC PIN FUNCTION DESCRIPTION
5-1.
System Control Pin Function
(MB-85 Board IC202) .................................................... 5-1
6.
TEST MODE
6-1.
General Description ...................................................... 6-1
6-2.
Starting Test Mode ........................................................ 6-1
6-3.
Syscon Diagnosis .......................................................... 6-1
6-4.
Drive Auto Adjustment ................................................... 6-5
6-5.
Drive Manual Operation ................................................ 6-7
6-6.
Mecha Aging .................................................................. 6-9
6-7.
Emergency History ........................................................ 6-9
6-8.
Version Information ....................................................... 6-10
6-9.
Video Level Adjustment ................................................. 6-10
7.
ELECTRICAL ADJUSTMENTS
7-1.
Power Supply Adjustment ............................................. 7-1
1.
Power Supply Check (HS-030SF BOARD) .................. 7-1
7-2.
Adjustment of Video System ......................................... 7-2
1.
Video Level Adjustment (MB-85 BOARD) .................... 7-2
2.
S-terminal Output Check (MB-85 BOARD) .................. 7-2
3.
Checking Component Video Output B-Y
(MB-85 BOARD) ............................................................ 7-2
4.
Checking Component Video Output R-Y
(MB-85 BOARD) ............................................................ 7-2
5.
Checking Component Video Output Y
(MB-85 BOARD) ............................................................ 7-3
6.
Checking S Video Output S-C (MB-85 BOARD) .......... 7-3
7-3.
Adjustment Related Parts Arrangement ....................... 7-4
8.
REPAIR PARTS LIST
8-1.
Exploded Views ............................................................. 8-1
8-1-1. Case Assembly ......................................................... 8-1
8-1-2. Front Panel Assembly .............................................. 8-2
8-1-3. Chassis Assembly .................................................... 8-3
8-1-4. Mechanism Deck Assembly ..................................... 8-4
8-2.
Electrical Parts List ........................................................ 8-5
TABLE  OF  CONTENTS
Section
Title
Page
Section
Title
Page
– 4 –
SERVICE  NOTE
1.
DISASSEMBLY
• This set can be disassembled in the order shown below.
Set
Case
(Page 2-1)
Power 
Block
(Page 2-1)
AU-212 Board
(Page 2-1)
Mechanism
Deck
(Page 2-2)
Front Panel
(Page 2-2)
Tray Cover
(Page 2-2)
Optical Pick-up
(Page 2-3)
TK-51 Board
(Page 2-3)
Belt
(Page 2-3)
Loading Motor (M001),
MS-46 Board
(Page 2-3)
Tray
(Page 2-2)
MB-85 Board
(Page 2-1)
Page of 93
Display

Sony DVP-S533D Service Manual ▷ Download

  • DOWNLOAD Sony DVP-S533D Service Manual ↓ Size: 26.59 MB | Pages: 93 in PDF or view online for FREE
  • Here you can View online or download the Service Manual for the Sony DVP-S533D in PDF for free, which will help you to disassemble, recover, fix and repair Sony DVP-S533D DVD. Information contained in Sony DVP-S533D Service Manual (repair manual) includes:
  • Disassembly, troubleshooting, maintenance, adjustment, installation and setup instructions.
  • Schematics, Circuit, Wiring and Block diagrams.
  • Printed wiring boards (PWB) and printed circuit boards (PCB).
  • Exploded View and Parts List.