Sharp MX-5500N / MX-6200N / MX-7000N (serv.man46) Service Manual ▷ View online
MX-7000N SIMULATION 7 – 101
66-2
Purpose
Data clear
Function (Purpose) Used to clear the FAX soft switch and set
the default value.
Section
FAX
Operation/Procedure
1)
1)
Enter the country code with 10-key.
* When [DEST CODE] key is pressed, the country code list is
* When [DEST CODE] key is pressed, the country code list is
displayed.
When [BACK] key is pressed on the destination code list
screen, the display returns to the destination code entry
screen.
When [BACK] key is pressed on the destination code list
screen, the display returns to the destination code entry
screen.
2)
Press [SET] key.
3)
Press [EXECUTE] key.
4)
Press [YES] key.
Clearing the soft switch is executed.
Clearing the soft switch is executed.
66-3
Purpose
Operation test, check
Function (Purpose) Used to check the operation (read/write) of
the FAX PWB memory.
Section
FAX
Operation/Procedure
1)
1)
Select a target item of the memory operation check with the
touch panel.
touch panel.
2)
Press [EXECUTE] key.
The operation check of the selected memory is executed.
The operation check of the selected memory is executed.
If "(once)" is selected, when check is completed normally,
"OK" is displayed. When there occurs an error, "NG" is dis-
played.
If "(repeat)" is selected, check is repeated until the result is
found "NG" or until [EXECUTE] key is pressed.
"OK" is displayed. When there occurs an error, "NG" is dis-
played.
If "(repeat)" is selected, check is repeated until the result is
found "NG" or until [EXECUTE] key is pressed.
66-4
Purpose
Operation check, test
Function (Purpose) Used to check the output operation
(MODEM operation) of data signal in each
data output mode of FAX. Send level: MAX
data output mode of FAX. Send level: MAX
Section
FAX
Operation/Procedure
1)
1)
Select the display screen with [
↑] and [↓] keys.
2)
Select an output target mode with the touch panel key.
3)
Press [EXECUTE] key.
A signal is outputted at the maximum send level.
When [EXECUTE] key is pressed, the signal output can be
stopped.
A signal is outputted at the maximum send level.
When [EXECUTE] key is pressed, the signal output can be
stopped.
JAPAN
00000000
NORWAY
10000010
U.S.A.
10110101
DENMARK
00110001
AUSTRALIA
00001001
NETHERLANDS
01111011
U.K.
10110100
ITALY
01011001
FRANCE
00111101
SWITZERLAND
10100110
GERMANY
00000100
AUSTRIA
00001010
SWEDEN
10100101
INDONESIA
01010100
NEWZEALAND
01111110
THAILAND
10101001
CHINA
00100110
MALAYSIA
01101100
SINGAPORE
10011100
INDIA
01010011
TW
11111110
PHILIPPINES
10001001
OTHER1
11111101
HONGKONG
01010000
OTHER2
11111100
RUSSIA
10111000
OTHER3
11111011
SOUTHAFRICA
10011111
FINLAND
00111100
SW No.
DATA
:
:
:
1 2 3 4 5 6 7 8
SIMLATION NO.66-01
TEST
FAX SOFT SW. SETTING.
CLOSE
EXECUTE
SIMULATION NO.66-02
TEST
FAX SOFT SW.CLEAR - JAPAN
CLOSE
PRESENT : 00000000
NEW :
SET
DEST CODE
ARE YOU SURE?
YES
NO
EXECUTE
1
All Memory Device Check (once)
Check all the items once.
2
MFP SRAM (once)
Check only once.
3
MFP SRAM (repeat)
Repeat checking.
4
MFP FLASH + OP.FLASH (once)
Check only once.
5
MFP FLASH + OP.FLASH(repeat)
Repeat checking.
6
MODEM EEPROM<1>(once)
Check only once.
7
MODEM EEPROM<1>(repeat)
Repeat checking.
8
MODEM SDRAM<1>(once)
Check only once.
9
MODEM SDRAM<1>(repeat)
Repeat checking.
NOSIGNAL
33.6 V34
31.2 V34
28.8 V34
26.4 V34
24.0 V34
21.6 V34
19.2 V34
16.8 V34
14.4 V34
12.0 V34
9.6 V34
7.2 V34
4.8 V34
2.4 V34
14.4 V33
12.0 V33
14.4 V17
12.0 V17
9.6 V17
7.2 V17
9.6 V29
7.2 V29
4.8 V27t
2.4 V27t
0.3 FLG
CED 2100
CNG 1100
0.3 V21
ANSam
RINGER
No RBT
DP MAKE
DP BRK
No MSG
SIMULATION NO.66-03
TEST
FAX PWB MEMORY CHECK
CLOSE
All Memory Device Check (once)
MFP SRAM(once)
MFP SRAM (repeat)
MFP FLASH + OP.FLASH(once)
MFP FLASH + OP.FLASH(repeat)
MODEM EEPROM<1>(once)
MODEM EEPROM<1>(repeat)
MODEM SDRAM<1>(once)
MODEM SDRAM<1>(repeat)
MX-7000N SIMULATION 7 – 102
66-5
Purpose
Operation test, check
Function (Purpose) Used to check the output operation
(MODEM operation) of data signal in each
data output mode of FAX. Send level: Soft
switch setting
data output mode of FAX. Send level: Soft
switch setting
Section
FAX
Operation/Procedure
1)
1)
Select the display screen with [
↑] and [↓] keys.
2)
Select an output target mode with the touch panel key.
3)
Press [EXECUTE] key.
A signal is outputted at the send level set with the soft switch.
When [EXECUTE] key is pressed, the signal output can be
stopped.
A signal is outputted at the send level set with the soft switch.
When [EXECUTE] key is pressed, the signal output can be
stopped.
66-6
Purpose
User data output, check
Function (Purpose) Used to print the confidential pass code.
Section
Section
FAX
Operation/Procedure
Press [EXECUTE] key to execute printing.
* If there is no confidential registration, no print is made.
Press [EXECUTE] key to execute printing.
* If there is no confidential registration, no print is made.
66-7
Purpose
User data output, check
Function (Purpose) Used to output the image memory data
(memory send and receive).
* The confidential receive contents are also
outputted.
* The confidential receive contents are also
outputted.
Section
FAX
Operation/Procedure
Press [EXECUTE] key to execute printing.
* If there is no image memory, no output is made.
Press [EXECUTE] key to execute printing.
* If there is no image memory, no output is made.
66-8
Purpose
Operation test, check
Function (Purpose) Used to check the output operation (audio
output IC operation check) of the various
audio signals of FAX. Send level: MAX
audio signals of FAX. Send level: MAX
Section
FAX
Operation/Procedure
1)
1)
Select an output target model with the touch panel key.
2)
Press [EXECUTE] key.
A signal is outputted at the maximum send level.
When [EXECUTE] key is pressed, the signal output can be
stopped.
A signal is outputted at the maximum send level.
When [EXECUTE] key is pressed, the signal output can be
stopped.
NOSIGNAL
33.6 V34
31.2 V34
28.8 V34
26.4 V34
24.0 V34
21.6 V34
19.2 V34
16.8 V34
14.4 V34
12.0 V34
9.6 V34
7.2 V34
4.8 V34
2.4 V34
14.4 V33
12.0 V33
14.4 V17
12.0 V17
9.6 V17
7.2 V17
9.6 V29
7.2 V29
4.8 V27t
2.4 V27t
0.3 FLG
CED 2100
CNG 1100
0.3 V21
ANSam
RINGER
No RBT
DP MAKE
DP BRK
No MSG
SIMULATION NO.66-04
TEST
SIGNAL OUTPUT CHECK. (LEVEL MAX)
EXECUTE
1/2
CLOSE
NOSIGNAL
33.6 V34
31.2 V34
28.8 V34
26.4 V34
24.0 V34
21.6 V34
19.2 V34
16.8 V34
14.4 V34
12.0 V34
9.6 V34
7.2 V34
4.8 V34
2.4 V34
14.4 V33
12.0 V33
14.4 V17
12.0 V17
9.6 V17
7.2 V17
9.6 V29
7.2 V29
4.8 V27t
2.4 V27t
0.3 FLG
CED 2100
CNG 1100
0.3 V21
ANSam
RINGER
No RBT
SIMULATION NO.66-05
TEST
SIGNAL OUTPUT CHECK. (SOFT SW.)
EXECUTE
1/2
CLOSE
NOSIGNAL
33.6 V34
31.2 V34
28.8 V34
26.4 V34
24.0 V34
21.6 V34
19.2 V34
16.8 V34
14.4 V34
12.0 V34
9.6 V34
7.2 V34
4.8 V34
2.4 V34
14.4 V33
12.0 V33
14.4 V17
12.0 V17
9.6 V17
7.2 V17
9.6 V29
7.2 V29
4.8 V27t
2.4 V27t
0.3 FLG
CED 2100
CNG 1100
0.3 V21
ANSam
RINGER
No RBT
NONE
Mute
PAUSE
Pause melody
MESSAGE1
Message 1
MESSAGE2
Message 2
MESSAGE3
Message 3
MESSAGE4
Message 4
MESSAGE5
Message 5
MESSAGE6
Message 6
ALARM
Alarm
RINGER
Ringer (Speaker)
EXT.TEL.RINGER
External telephone ringer
SIMULATION NO.66-06
PASS CODE PRINT OUT.
TEST
EXECUTE
CLOSE
SIMULATION NO.66-07
IMAGE MEMORY PRINT OUT.
TEST
EXECUTE
CLOSE
SIMULATION NO.66-08
TEST
MESSAGE OUTPUT CHECK.(LEVEL MAX)
EXECUTE
CLOSE
NONE
PAUSE
MESSAGE1
MESSAGE2
MESSAGE3
MESSAGE4
MESSAGE5
MESSAGE6
ALARM
RINGER
EXT.TEL.RINGER
MX-7000N SIMULATION 7 – 103
66-9
Purpose
Operation test, check
Function (Purpose) Used to check the output operation (audio
output IC operation) of various audio sig-
nals of FAX. Send level: Soft switch setting
nals of FAX. Send level: Soft switch setting
Section
FAX
Operation/Procedure
1)
1)
Select an output target mode with the touch panel key.
2)
Press [EXECUTE] key.
A signal is outputted at the send level set with the soft switch.
When [EXECUTE] key is pressed, the signal output can be
stopped.
A signal is outputted at the send level set with the soft switch.
When [EXECUTE] key is pressed, the signal output can be
stopped.
66-10
Purpose
Data clear
Function (Purpose) Used to clear all the data (memory receive
and send) of the image memory.
* The confidential receive data are cleared
simultaneously.
* The confidential receive data are cleared
simultaneously.
Section
FAX
Operation/Procedure
1)
1)
Press [EXECUTE] key.
2)
Press [YES] key.
The image memory is cleared.
The image memory is cleared.
66-11
Purpose
Operation test, check
Function (Purpose) Used to check the output operation
(MODEM operation) in the FAX G3 mode
300bps. Send level: MAX
300bps. Send level: MAX
Section
FAX
Operation/Procedure
1)
1)
Select an output target mode with the touch panel key.
2)
Press [EXECUTE] key.
A signal is outputted at the maximum send level.
When [EXECUTE] key is pressed, the signal output can be
stopped.
A signal is outputted at the maximum send level.
When [EXECUTE] key is pressed, the signal output can be
stopped.
66-12
Purpose
Operation test, check
Function (Purpose) Used to check the output operation
(MODEM operation) in the FAX G3 mode
300bps. Send level: Set with the soft
switch.
300bps. Send level: Set with the soft
switch.
Section
FAX
Operation/Procedure
1)
1)
Select an output target mode with the touch panel.
2)
Press [EXECUTE] key.
A signal is outputted at the send level set with the soft switch.
When [EXECUTE] key is pressed, the signal output can be
stopped.
A signal is outputted at the send level set with the soft switch.
When [EXECUTE] key is pressed, the signal output can be
stopped.
66-13
Purpose
Setting
Function (Purpose) Used to set the number for the FAX dial sig-
nal output test. (In the dial signal output test
with SIM66-14 - 16, the dial number set
with this simulation is outputted.)
with SIM66-14 - 16, the dial number set
with this simulation is outputted.)
Section
FAX
Operation/Procedure
1)
1)
Enter the set value with 10-key.
Enter with 10-key (0 - 9), [*] key, and [#] key. The upper limit is
20 digits.
Enter with 10-key (0 - 9), [*] key, and [#] key. The upper limit is
20 digits.
2)
Press [SET] key.
Setting is saved.
Setting is saved.
NONE
Mute
PAUSE
Pause melody
MESSAGE1
Message 1
MESSAGE2
Message 2
MESSAGE3
Message 3
MESSAGE4
Message 4
MESSAGE5
Message 5
MESSAGE6
Message 6
ALARM
Alarm
RINGER
Ringer (Speaker)
EXT.TEL.RINGER
External telephone ringer
SIMULATION NO.66-09
TEST
MESSAGE OUTPUT CHECK.(SOFT SW.)
EXECUTE
CLOSE
NONE
PAUSE
MESSAGE1
MESSAGE2
MESSAGE3
MESSAGE4
MESSAGE5
MESSAGE6
ALARM
RINGER
EXT.TEL.RINGER
ARE YOU SURE?
YES
NO
EXECUTE
SIMULATION NO.66-10
TEST
IMAGE MEMORY CLEAR.
CLOSE
SIMULATION NO.66-11
TEST
300bps SIGNAL OOUTPUT. (LEVEL MAX.)
EXECUTE
CLOSE
NO SIGNAL
11111
11110
00000
010101
00001
SIMULATION NO.66-12
TEST
300bps SIGNAL OOUTPUT. (SOFT SW.)
EXECUTE
CLOSE
NO SIGNAL
11111
11110
00000
010101
00001
SIMULATION NO.66-13
TEST
DIAL TEST NUMBER SETTING.
CLOSE
PRESENT : 0123456789#
NEW :
SET
MX-7000N SIMULATION 7 – 104
66-14
Purpose
Setting/Operation test, check
Function (Purpose) Used to set the make time in the FAX pulse
dial mode (10PPS) and to execute the dial
signal output test. (The signal of the dial
number set with SIM66-13 is outputted.)
signal output test. (The signal of the dial
number set with SIM66-13 is outputted.)
Section
FAX
Operation/Procedure
1)
1)
Enter the set value of make time with 10-key. (0 - 15)
2)
Press [EXECUTE] key.
The dial signal is outputted at the make time set with the above
procedure.
When [EXECUTE] key is pressed, the signal output can be
stopped.
The dial signal is outputted at the make time set with the above
procedure.
When [EXECUTE] key is pressed, the signal output can be
stopped.
66-15
Purpose
Setting/Operation test, check
Function (Purpose) Used to set the make time in the FAX pulse
dial mode (20PPS) and to execute the dial
signal output test. (The signal of the dial
number set with SIM 66-13 is outputted.)
signal output test. (The signal of the dial
number set with SIM 66-13 is outputted.)
Section
FAX
Operation/Procedure
1)
1)
Enter the set value of the make time with 10-key. (0 - 15)
2)
Press [EXECUTE] key.
The dial signal is outputted at the make time set in the above
procedure.
When [EXECUTE] key is pressed, the signal output can be
stopped.
The dial signal is outputted at the make time set in the above
procedure.
When [EXECUTE] key is pressed, the signal output can be
stopped.
66-16
Purpose
Setting/Operation test, check
Function (Purpose) Used to perform the dial signal (DTMF) out-
put test in the FAX tone dial mode. (The
signal of the dial number set with SIM 66-
13 is outputted.) The send level can be set
to an optional level.
signal of the dial number set with SIM 66-
13 is outputted.) The send level can be set
to an optional level.
Section
FAX
Operation/Procedure
1)
1)
Select a target item to be set with [
↑] [↓] keys.
2)
Enter the set value of the send level with 10-key. (0 - 15)
3)
Press [EXECUTE] key.
The dial signal is outputted at the send level set in the above
procedure.
When [EXECUTE] key is pressed, the signal output can be
stopped.
The dial signal is outputted at the send level set in the above
procedure.
When [EXECUTE] key is pressed, the signal output can be
stopped.
66-17
Purpose
Operation test, check
Function (Purpose) Used to perform the dial signal (DTMF) out-
put test in the FAX tone dial mode. Send
level: MAX
level: MAX
Section
FAX
Operation/Procedure
1)
1)
Select an output target mode with the touch panel.
2)
Press [EXECUTE] key.
A signal is outputted at the maximum send level.
When [EXECUTE] key is pressed, the signal output can be
stopped.
A signal is outputted at the maximum send level.
When [EXECUTE] key is pressed, the signal output can be
stopped.
66-18
Purpose
Operation test, check
Function (Purpose) Used to perform the dial signal (DTMF) out-
put test in the FAX tone dial mode. Send
level: Set with the soft switch.
level: Set with the soft switch.
Section
FAX
A : 4
;
MAKE TIME [+29ms]
A:
SIMULATION NO.66-14
DIAL TEST(10PPS)
4
0
15
OK
TEST
EXECUTE
CLOSE
A : 4
;
MAKE TIME [+9ms]
A:
SIMULATION NO.66-15
DIAL TEST(20PPS)
4
0
15
OK
TEST
EXECUTE
CLOSE
A :
4
HIGH(dB)
A:
SIMULATION NO.66-16
DIAL TEST(DTMF)
4
㨇
0 㨪
15 㨉
OK
TEST
EXECUTE
CLOSE
B :
4
HIGH-LOW
SIMULATION NO.66-17
TEST
DTMF SIGNAL OUTPUT.(LEVEL MAX)
EXECUTE
CLOSE
1
2
3
4
5
6
7
8
9
0
#
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man46) service manuals if exist.