Sharp MX-5500N / MX-6200N / MX-7000N (serv.man46) Service Manual ▷ View online
MX-7000N SIMULATION 7 – 81
2)
Set item A (L4) and item B (L5) to 0.
3)
Set the magnification ratio to 200%, and press [COLOR] and
[BW] key to make a print.
[BW] key to make a print.
4)
Measure the printed image, and input the distance a (DSPF) to
L4 and L5 in the unit of 0.1mm.
L4: Distance a (DSPF surface: 200%) (Unit: 0.1mm)
L5: Distance a (DSPF back surface: 200%) (Unit: 0.1mm)
L4 and L5 in the unit of 0.1mm.
L4: Distance a (DSPF surface: 200%) (Unit: 0.1mm)
L5: Distance a (DSPF back surface: 200%) (Unit: 0.1mm)
5)
Press [EXECUTE] key. (The set value is saved.)
50-10
Purpose
Adjustment
Function (Purpose) Used to adjust the print image off-center
position. (Adjustment is made separately
for each paper feed section.)
for each paper feed section.)
Section
Operation/Procedure
1)
1)
Select a target item of the adjustment with [
↑] and [↓] keys on
the touch panel.
2)
Enter the adjustment value with 10-key.
3)
Press [EXECUTE] key. (The set value is saved.)
50-12
Purpose
Adjustment
Function (Purpose) Used to perform the scan image off-center
position adjustment. (The adjustment is
made separately for each scan mode.)
made separately for each scan mode.)
Section
Operation/Procedure
1)
1)
Select a target item of the adjustment with [
↑] and [↓] keys on
the touch panel.
2)
Enter the adjustment value with 10-key.
3)
Press [OK] key. (The set value is saved.)
Item
Default
value
A
L4
Distance of up to 10mm from
the front surface image lead
edge (200%, 0.1mm unit)
the front surface image lead
edge (200%, 0.1mm unit)
-
B
L5
Distance of up to 10mm from
the back surface image lead
edge (200%, 0.1mm unit)
the back surface image lead
edge (200%, 0.1mm unit)
-
C
LEAD_EDGE (SIDE1)
Image loss amount setting
SIDE 1
SIDE 1
20
D
FRONT_REAR (SIDE1)
20
E
TRAIL_EDGE (SIDE1)
30
F
LEAD_EDGE (SIDE2)
Image loss amount setting
SIDE 2
SIDE 2
30
G
FRONT_REAR (SIDE2)
20
H
TRAIL_EDGE (SIDE2)
20
[DSPF front surface]
[DSPF back surface]
Distance a
Distance a
A : 0
;
L4
B : 0
;
L5
C : 20
;
LEAD_EDGE (SIDE1)
D : 20
;
FRONT_REAR (SIDE1)
A:
SIMULATION NO.50-07
LEAD EDGE ADJUSTMENT (SPF CALC.).
0
0
999
TEST
E : 30
;
TRAIL_EDGE (SIDE1)
F : 30
;
LEAD_EDGE (SIDE2)
G : 20
;
FRONT_REAR (SIDE2)
H : 20
;
TRAIL_EDGE (SIDE2)
EXECUTE
CLOSE
Item
Default
value
A
BK-MAG
Main scan print magnification ratio BK
100
B
MFT
Print off-center adjustment value
(manual feed)
(manual feed)
50
C
CS1
Print off-center adjustment value
(Cassette 1)
(Cassette 1)
50
D
CS2
Print off-center adjustment value
(Cassette 2)
(Cassette 2)
50
E
CS3
Print off-center adjustment value
(Cassette 3)
(Cassette 3)
50
F
CS4
Print off-center adjustment value
(Cassette 4)
(Cassette 4)
50
G
LCC
Print off-center adjustment value (LCC)
50
H
ADU
Print off-center adjustment value
(ADU)
(ADU)
50
I
MULTI COUNT
Print quantity
1
J
PAPER
MFT
Cassette
selection
selection
1: Manual feed
2
CS1
2: Cassette 1
CS2
3: Cassette 2
CS3
4: Cassette 3
CS4
5: Cassette 4
LCC
6: LCC
K
DUPLEX
YES
Duplex print
select
select
0: Select
1
NO
1: Not selected
Item
Default
value
A
OC
OC document off-center adjustment
50
B
SPF (SIDE1)
DSPF front surface document off-center
adjustment
adjustment
50
C
SPF (SIDE2)
DSPF back surface document off-center
adjustment
adjustment
50
A : 100
;
BK-MAG
B : 50
;
MFT
C : 50
;
CS1
D : 50
;
CS2
A:
SIMULATION NO.50-10
PAPER CENTER OFFSET SETUP
100
60
140
OK
TEST
CLOSE
E : 50
;
CS3
F : 50
;
CS4
G : 50
;
LCC
H : 50
;
ADU
I :
1
;
MULTICOUNT
J :
2
;
PAPER : CS1
K :
1
;
DUPLEX : NO
EXECUTE
MX-7000N SIMULATION 7 – 82
50-20
Purpose
Adjustment
Function (Purpose) Used to perform the main scanning direc-
tion manual registration adjustment.
Section
Operation/Procedure
1)
1)
Select a target item of the adjustment with [
↑] and [↓] keys on
the touch panel.
2)
Enter the adjustment value with 10-key.
3)
Press [EXECUTE] key. (The set value is saved.)
50-21
Purpose
Adjustment
Function (Purpose) Used to perform the sub scanning direction
manual registration adjustment.
Section
Operation/Procedure
1)
1)
Select a target item of the adjustment with [
↑] and [↓] keys on
the touch panel.
2)
Enter the adjustment value with 10-key.
3)
Press [EXECUTE] key. (The set value is saved.)
50-22
Purpose
Adjustment
Function (Purpose) Used to perform the main/sub scanning
auto registration adjustment.
Section
Operation/Procedure
1)
1)
Select a target item for the adjustment with [REGIST], [DRUM
POS], and [ALL] keys on the touch panel.
POS], and [ALL] keys on the touch panel.
2)
Press [EXECUTE] key.
All the drum motors are operated to start the adjustment.
All the drum motors are operated to start the adjustment.
Item
Default
value
A CYAN (FRONT)
Registration adjustment value main
scanning direction F side (Cyan)
scanning direction F side (Cyan)
100
B CYAN (REAR)
Registration adjustment value main
scanning direction R side (Cyan)
scanning direction R side (Cyan)
100
C MAGENTA
(FRONT)
Registration adjustment value main
scanning direction F side (Magenta)
scanning direction F side (Magenta)
100
D MAGENTA (REAR)
Registration adjustment value main
scanning direction R side Magenta)
scanning direction R side Magenta)
100
E YELLOW (FRONT)
Registration adjustment value main
scanning direction F side (Yellow)
scanning direction F side (Yellow)
100
F YELLOW (REAR)
Registration adjustment value main
scanning direction R side (Yellow)
scanning direction R side (Yellow)
100
G MULTICOUNT
Print quantity
1
H PAPER
MFT
Cassette
selection
selection
1: Manual feed
4
CS1
2: Cassette 1
CS2
3: Cassette 2
CS3
4: Cassette 3
CS4
5: Cassette 4
LCC
6: LCC
I
DUPLEX
YES
Duplex print
select
select
0: Select
1
NO
1: Not selected
A : 50
;
OC
B : 50
;
SPF(SIDE1)
C : 50
;
SPF(SIDE2)
A:
SIMULATION NO.50-12
ORIGINAL CENTER OFFSET SETUP
50
1
99
OK
TEST
CLOSE
A : 100
;
CYAN(FRONT)
B : 100
;
CYAN(REAR)
C : 100
;
MAGENTA(FRONT)
D : 100
;
MAGENTA(REAR)
A:
SIMULATION NO.50-20
REGISTRATION ADJUSTMENT : FRONT-REAR DIRECTION
100
1
199
OK
TEST
CLOSE
E : 100
;
YELLOW(FRONT)
F : 100
;
YELLOW(REAR)
G :
1
;
MULTICOUNT
H :
4
;
PAPER : CS3
I :
1
;
DUPLEX : NO
EXECUTE
Item
Default
value
A
CYAN
Registration adjustment value sub
scanning direction CYAN
scanning direction CYAN
100
B
MAGENTA
Registration adjustment value sub
scanning direction MAGENTA
scanning direction MAGENTA
100
C
YELLOW
Registration adjustment value sub
scanning direction YELLOW
scanning direction YELLOW
100
D
MULTICOUNT
Print quantity
1
E
PAPER
MFT
Cassette
selection
selection
Manual feed
2
CS1
Cassette 1
CS2
Cassette 2
CS3
Cassette 3
CS4
Cassette 4
LCC
LCC
F
DUPLEX
YES
Duplex print
select
select
Select
1
NO
Not select
A : 100
;
CYAN
B : 100
;
MAGENTA
C : 100
;
YELLOW
D :
1
;
MULTICOUNT
A:
SIMULATION NO.50-21
REGISTRATION ADJUSTMENT : SCANNING DIRECTION
100
1
199
OK
TEST
CLOSE
E :
2
;
PAPER : CS1
F :
1
;
DUPLEX : NO
EXECUTE
MX-7000N SIMULATION 7 – 83
<Error display for abnormal completion>
Item
Default
value
ALL (Auto
registration
adjustment,
auto phase
adjustment)
registration
adjustment,
auto phase
adjustment)
REGIST (Auto
registration
adjustment
execution)
registration
adjustment
execution)
MAIN F
C
Registration adjustment value main scanning direction (Cyan F side)
100
M
Registration adjustment value main scanning direction (Magenta F side)
100
Y
Registration adjustment value main scanning direction (Yellow F side)
100
MAIN R
C
Registration adjustment value main scanning direction (Cyan R side)
100
M
Registration adjustment value main scanning direction (Magenta R side)
100
Y
Registration adjustment value main scanning direction (Yellow R side)
100
SUB
C
Registration adjustment value sub scanning direction (Cyan drum
→ Black drum)
100
M
Registration adjustment value sub scanning direction (Magenta drum
→ Cyan drum)
100
Y
Registration adjustment value sub scanning direction (Yellow drum
→ Magenta drum)
100
DRUM POS (Auto
phase adjustment
execution)
phase adjustment
execution)
START
POINT
POINT
K
Pulse modulation start timing
Changes up to 355
Changes up to 355
° in the increment of 5°.
0 - 71
0: 0
°
0
1: 5
°
:
:
:
70: 350
°
71: 355
°
CL
Pulse modulation start timing
Changes up to 355
Changes up to 355
° in the increment of 5°.
0 - 71
0: 0
°
0
1: 5
°
:
:
:
70: 350
°
71: 355
°
AMP
K
Pulse modulation deflection amount
0
CL
Pulse modulation deflection amount (C/M/Y average value of linearity deflection
amount)
amount)
0
PHASE
C
Phase adjustment C
→ Y
Changes up to 355
° in the increment of 5°.
0 - 71
0: 0
°
0
1: 5
°
:
:
:
70: 350
°
71: 355
°
M
Phase adjustment M
→ Y
Changes up to 355
° in the increment of 5°.
0 - 71
0: 0
°
0
1: 5
°
:
:
:
70: 350
°
71: 355
°
AMP
C
Linearity deflection amount
0
M
Linearity deflection amount
0
Y
Linearity deflection amount
0
Error
code
Error display
Error content
Compulsory
end error
end error
–
SUSPENDED
Door open during operation
–
SUSPENDED
CA button push during
operation
operation
–
–
Unconfirmed operation during
operation (power OFF)
operation (power OFF)
Basic error
1
TONNER
EMPTY 01
EMPTY 01
BK or all color toner EMPTY
detection
detection
2
BEFORE
BEHAVIOR 02
BEHAVIOR 02
Other conditions
4
SENSOR
CALIBRATION
04
CALIBRATION
04
After 3-time retries of F or R,
the target is not reached.
the target is not reached.
5
TIME OVER 05
Data is not acquired for 90sec
from the latest data
acquisition.
from the latest data
acquisition.
7
PROCESS
CONTROL 07
CONTROL 07
Process control error detection
Sub
scanning
adjustment
error
scanning
adjustment
error
10
SUB BLACK
FRONT 10
FRONT 10
The pitch data number is not
the specified number.
the specified number.
11
SUB BLACK
FRONT 11
FRONT 11
The pitch data is not in the
specified allowable range.
specified allowable range.
15
SUB BLACK
REAR 15
REAR 15
The pitch data number is not in
the specified allowable range.
the specified allowable range.
16
SUB BLACK
REAR 16
REAR 16
The pitch data is not in the
specified allowable range.
specified allowable range.
20
SUB CYAN
FRONT 20
FRONT 20
The pitch data number is not
the specified number.
the specified number.
21
SUB CYAN
FRONT 21
FRONT 21
The pitch data is not in the
specified allowable range.
specified allowable range.
Sub
scanning
adjustment
error
scanning
adjustment
error
22
SUB CYAN
FRONT 22
FRONT 22
The calculation result value is
not in the specified allowable
range.
not in the specified allowable
range.
23
SUB CYAN
FRONT 23
FRONT 23
The amount of change in the
calculation result value is not
in the specified allowable
range.
calculation result value is not
in the specified allowable
range.
25
SUB CYAN
REAR 25
REAR 25
The pitch data number is not
the specified number.
the specified number.
26
SUB CYAN
REAR 26
REAR 26
The pitch data is not in the
specified allowable range.
specified allowable range.
27
SUB CYAN
REAR 27
REAR 27
The calculation result value is
not in the specified allowable
range.
not in the specified allowable
range.
28
SUB CYAN
REAR 28
REAR 28
The amount of change in the
calculation result value is not
in the specified allowable
range.
calculation result value is not
in the specified allowable
range.
30
SUB MAGENTA
FRONT 30
FRONT 30
The pitch data number is not
the specified number.
the specified number.
31
SUB MAGENTA
FRONT 31
FRONT 31
The pitch data is not in the
specified allowable range.
specified allowable range.
32
SUB MAGENTA
FRONT 32
FRONT 32
The calculation result value is
not in the specified allowable
range.
not in the specified allowable
range.
33
SUB MAGENTA
FRONT 33
FRONT 33
The amount of change in the
calculation result value is not
in the specified allowable
range.
calculation result value is not
in the specified allowable
range.
Error
code
Error display
Error content
MX-7000N SIMULATION 7 – 84
Sub
scanning
adjustment
error
scanning
adjustment
error
35
SUB MAGENTA
REAR 35
REAR 35
The pitch data number is not
the specified number.
the specified number.
36
SUB MAGENTA
REAR 36
REAR 36
The pitch data is not in the
specified allowable range.
specified allowable range.
37
SUB MAGENTA
REAR 37
REAR 37
The calculation result value is
not in the specified allowable
range.
not in the specified allowable
range.
38
SUB MAGENTA
REAR 38
REAR 38
The amount of change in the
calculation result value is not
in the specified allowable
range.
calculation result value is not
in the specified allowable
range.
40
SUB YELLOW
FRONT 40
FRONT 40
The pitch data number is not
the specified number.
the specified number.
41
SUB YELLOW
FRONT 41
FRONT 41
The pitch data is not in the
specified allowable range.
specified allowable range.
42
SUB YELLOW
FRONT 42
FRONT 42
The calculation result value is
not in the specified allowable
range.
not in the specified allowable
range.
43
SUB YELLOW
FRONT 43
FRONT 43
The amount of change in the
calculation result value is not
in the specified allowable
range.
calculation result value is not
in the specified allowable
range.
45
SUB YELLOW
REAR 45
REAR 45
The pitch data number is not
the specified number.
the specified number.
46
SUB YELLOW
REAR 46
REAR 46
The pitch data is not in the
specified allowable range.
specified allowable range.
47
SUB YELLOW
REAR 47
REAR 47
The calculation result value is
not in the specified allowable
range.
not in the specified allowable
range.
Main
scanning
adjustment
error
scanning
adjustment
error
48
SUB YELLOW
REAR 48
REAR 48
The amount of change in the
calculation result value is not
in the specified allowable
range.
calculation result value is not
in the specified allowable
range.
50
MAIN BLACK
FRONT 50
FRONT 50
The pitch data number is not
the specified number.
the specified number.
51
MAIN BLACK
FRONT 51
FRONT 51
The pitch data is not in the
specified allowable range.
specified allowable range.
55
MAIN BLACK
REAR 55
REAR 55
The pitch data number is not in
the specified allowable range.
the specified allowable range.
56
MAIN BLACK
REAR 56
REAR 56
The pitch data is not in the
specified allowable range.
specified allowable range.
60
MAIN CYAN
FRONT 60
FRONT 60
The pitch data number is not
the specified number.
the specified number.
61
MAIN CYAN
FRONT 61
FRONT 61
The pitch data is not in the
specified allowable range.
specified allowable range.
62
MAIN CYAN
FRONT 62
FRONT 62
The calculation result value is
not in the specified allowable
range.
not in the specified allowable
range.
63
MAIN CYAN
FRONT 63
FRONT 63
The amount of change in the
calculation result value is not
in the specified allowable
range.
calculation result value is not
in the specified allowable
range.
65
MAIN CYAN
REAR 65
REAR 65
The pitch data number is not
the specified number.
the specified number.
66
MAIN CYAN
REAR 66
REAR 66
The pitch data is not in the
specified allowable range.
specified allowable range.
67
MAIN CYAN
REAR 67
REAR 67
The calculation result value is
not in the specified allowable
range.
not in the specified allowable
range.
68
MAIN CYAN
REAR 68
REAR 68
The amount of change in the
calculation result value is not
in the specified allowable
range.
calculation result value is not
in the specified allowable
range.
70
MAIN MAGENTA
FRONT 70
FRONT 70
The pitch data number is not
the specified number.
the specified number.
71
MAIN MAGENTA
FRONT 71
FRONT 71
The pitch data is not in the
specified allowable range.
specified allowable range.
72
MAIN MAGENTA
FRONT 72
FRONT 72
The calculation result value is
not in the specified allowable
range.
not in the specified allowable
range.
73
MAIN MAGENTA
FRONT 73
FRONT 73
The amount of change in the
calculation result value is not
in the specified allowable
range.
calculation result value is not
in the specified allowable
range.
Error
code
Error display
Error content
Main
scanning
adjustment
error
scanning
adjustment
error
75
MAIN MAGENTA
REAR 75
REAR 75
The pitch data number is not
the specified number.
the specified number.
76
MAIN MAGENTA
REAR 76
REAR 76
The pitch data is not in the
specified allowable range.
specified allowable range.
77
MAIN MAGENTA
REAR 77
REAR 77
The calculation result value is
not in the specified allowable
range.
not in the specified allowable
range.
78
MAIN MAGENTA
REAR 78
REAR 78
The amount of change in the
calculation result value is not
in the specified allowable
range.
calculation result value is not
in the specified allowable
range.
80
MAIN YELLOW
FRONT 80
FRONT 80
The pitch data number is not
the specified number.
the specified number.
81
MAIN YELLOW
FRONT 81
FRONT 81
The pitch data is not in the
specified allowable range.
specified allowable range.
82
MAIN YELLOW
FRONT 82
FRONT 82
The calculation result value is
not in the specified allowable
range.
not in the specified allowable
range.
83
MAIN YELLOW
FRONT 83
FRONT 83
The amount of change in the
calculation result value is not
in the specified allowable
range.
calculation result value is not
in the specified allowable
range.
85
MAIN YELLOW
REAR 85
REAR 85
The pitch data number is not
the specified number.
the specified number.
86
MAIN YELLOW
REAR 86
REAR 86
The pitch data is not in the
specified allowable range.
specified allowable range.
87
MAIN YELLOW
REAR 87
REAR 87
The calculation result value is
not in the specified allowable
range.
not in the specified allowable
range.
88
MAIN YELLOW
REAR 88
REAR 88
The amount of change in the
calculation result value is not
in the specified allowable
range.
calculation result value is not
in the specified allowable
range.
91
RIB BLACK 91
The rib cannot be detected
either in the phase pattern or
in the sub pattern.
either in the phase pattern or
in the sub pattern.
92
RIB CYAN 92
The rib cannot be detected
either in the phase pattern or
in the sub pattern.
either in the phase pattern or
in the sub pattern.
93
RIB MAGENTA
93
93
The rib cannot be detected
either in the phase pattern or
in the sub pattern.
either in the phase pattern or
in the sub pattern.
94
RIB YELLOW 94
The rib cannot be detected
either in the phase pattern or
in the sub pattern.
either in the phase pattern or
in the sub pattern.
Other errors
99
OTHER 99
Other errors
Phase
adjustment
error
adjustment
error
110
PHASE BLACK
FRONT 110
FRONT 110
Phase number error
111
PHASE BLACK
FRONT 111
FRONT 111
Phase pitch error
115
PHASE BLACK
REAR 115
REAR 115
Phase number error
116
PHASE BLACK
REAR 116
REAR 116
Phase pitch error
120
PHASE CYAN
FRONT 120
FRONT 120
Phase number error
121
PHASE CYAN
FRONT 121
FRONT 121
Phase pitch error
125
PHASE CYAN
REAR 125
REAR 125
Phase number error
126
PHASE CYAN
REAR 126
REAR 126
Phase pitch error
130
PHASE
MAGENTA
FRONT 130
MAGENTA
FRONT 130
Phase number error
131
PHASE
MAGENTA
FRONT131
MAGENTA
FRONT131
Phase pitch error
135
PHASE
MAGENTA
REAR 135
MAGENTA
REAR 135
Phase number error
136
PHASE
MAGENTA
REAR 136
MAGENTA
REAR 136
Phase pitch error
Error
code
Error display
Error content
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man46) service manuals if exist.