Sharp MX-5500N / MX-6200N / MX-7000N (serv.man46) Service Manual ▷ View online
MX-7000N SIMULATION 7 – 89
55
55-1
Purpose
(Do not use this function unless specially
required.)
required.)
Function (Purpose) Used to perform the engine control opera-
tion specification setting.
Section
Operation/Procedure
55-2
Purpose
(Do not use this function unless specially
required.)
required.)
Function (Purpose) Used to perform the scanner control opera-
tion specification setting.
Section
Operation/Procedure
55-3
Purpose
(Do not use this function unless specially
required.)
required.)
Function (Purpose) Used to perform the controller operation
specification setting.
Section
Operation/Procedure
56
56-1
Purpose
Backup
Function (Purpose) Data transfer (Used in repairing the PWB.)
Section
Section
Operation/Procedure
1)
1)
Select a target content of data transfer.
2)
Press [EXECUTE] key and press [YES] key.
Data transfer of the item selected in procedure 1 is executed.
When the operation is completed normally, "COMPLETE" is
displayed. In case of an abnormal end, "ERROR" is displayed.
Data transfer of the item selected in procedure 1 is executed.
When the operation is completed normally, "COMPLETE" is
displayed. In case of an abnormal end, "ERROR" is displayed.
56-2
Purpose
Backup
Function (Purpose) Used to backup the data (user authentica-
tion data, address book, etc.) in the
EEPROM, the SRAM, and the HDD of the
main unit into the USB memory and to
transfer the data.
EEPROM, the SRAM, and the HDD of the
main unit into the USB memory and to
transfer the data.
Section
Operation/Procedure
1)
1)
Insert the USB memory to the machine.
2)
Select a target item for transfer with the touch panel.
3)
Press [EXECUTE] key and press [YES] key.
Data transfer of the item selected in procedure 2 is executed.
When the operation is completed normally, "COMPLETE" is
displayed. In case of an abnormal end, "ERROR" is displayed.
Data transfer of the item selected in procedure 2 is executed.
When the operation is completed normally, "COMPLETE" is
displayed. In case of an abnormal end, "ERROR" is displayed.
SIMULATION NO.55-01
TEST
ENGINE SOFT SW. SETTING.
CLOSE
EXECUTE
SW NO.
(SW No.1-16)
DATA
1 2 3 4 5 6 7 8
:
:
SIMULATION NO.55-02
TEST
SCANNER SOFT SW. SETTING.
CLOSE
EXECUTE
SW NO.
(SW No.1-16)
DATA
1 2 3 4 5 6 7 8
:
:
SIMULATION NO.55-03
TEST
MFP SOFT SW. SETTING.
CLOSE
EXECUTE
SW NO.
(SW No.1-16)
DATA
1 2 3 4 5 6 7 8
:
:
ALL
→ HDD
All the memory contents are transferred to the HDD.
HDD
→ ALL
The HDD contents are transferred to all the
memories.
memories.
EEPROM
→ HDD Transfer from EEPROM to HDD
HDD
→ EEPROM Transfer from HDD to EEPROM
SRAM
→ HDD
Transfer from SRAM or HDD (including the FAX
memory)
memory)
HDD
→ SRAM
Transfer from HDD to SRAM (including the FAX
memory)
memory)
ARE YOU SURE?
YES
NO
SIMULATION NO.56-01
TEST
COPY DATA
EXECUTE
ALL HDD
ENABLE
:
HDD ALL
DISABLE
:
EEPROM HDD
DISABLE
:
HDD EEPROM :
DISABLE
1/1
CLOSE
SRAM HDD
:
DISABLE
HDD SRAM
:
DISABLE
SIMULATION NO.56-02
TEST
EXPORT/IMPORT FILING DATA
HDD EXPORT
HDD IMPORT
EEPROM&SRAM EXPORT
EEPROM&SRAM IMPORT
1/1
CLOSE
MX-7000N SIMULATION 7 – 90
60
60-1
Purpose
Operation test/Check
Function (Purpose) Used to check the operations (read/write)
of the MFP control (SDRAM).
Section
Operation/Procedure
1)
1)
Press [EXECUTE] key.
The test is started.
The test is started.
60-2
Purpose
(Do not use in the market.)
Function (Purpose) Used to set the onboard SDRAM.
Section
Section
Operation/Procedure
61
61-1
Purpose
Operation test/Check
Function (Purpose) Used to check the polygon motor rotation
and the BD signal detection.
Section
LSU
Operation/Procedure
1)
1)
Select a target mode for check with [COLOR] and [MONO] key
on the touch panel.
on the touch panel.
2)
Press [EXECUTE] key.
When the operation is completed normally, [OK] is displayed.
In case of an abnormal end, [NG] is displayed.
When the operation is completed normally, [OK] is displayed.
In case of an abnormal end, [NG] is displayed.
61-2
Purpose
Adjustment/Setting
Function (Purpose) Used to set the laser power. (for printer
FIERY)
Section
Operation/Procedure
1)
1)
Select a target item of the adjustment with [
↑] and [↓] keys on
the touch panel.
2)
Enter the adjustment value with 10-key.
3)
Press [OK] key. (The set value is saved.)
Item
Default value
A
SETTING ENABLE
0
B
NUMBER OF ROW
2
C
NUMBER OF COLUMN
2
D
TWR SETTING VALUE
1
E
TRAS SETTING VALUE
2
F
TRC SETTING VALUE
3
G
TRCD SETTING VALUE
1
H
TRP SETTING VALUE
1
I
TFRC SETTING VALUE
3
J
CAS LATENCY
1
K
TOTAL NUMBER OF MBYTES ONBOARD DDR
1
L
NUMBER OF ONBOARD-DDR CS-BANK
1
SIMULATION NO.60-01
TEST
SDRAM READ/WRITE TEST
CLOSE
EXECUTE
PRESS [EXECUTE] TO START
A : 0
; SETTING ENABLE : DISABLE
B : 2
; NUMBER OF ROW : 13BIT
C : 2
; NUMBER OF COLUMN : 10BIT
D : 1
; TWR SETTING VALUE : 3CLOCK
A:
SIMULATION NO.60-02
SDRAM SETTING
0
0
1
OK
TEST
CLOSE
E : 2
; TRAS SETTING VALUE : 6CLOCK
F : 3
; TRC SETTING VALUE : 9CLOCK
G : 1
; TRCD SETTING VALUE : 3CLOCK
H : 1
; TRP SETTING VALUE : 3CLOCK
I :
3
; TFRP SETTING VALUE : 10CLOCK
J :
1
; TRCD ABSOLUTE VALUE : CL=2.5
K : 1
; TOTAL NUMBER OF MBYTES ONBOARD DDR : 128MBYTE
L : 1
; NUMBER OF ONBOARD-DDR CS-BANK : 1CHIP SELECT
LSU TESTRESULT NG: PG CL
LSU check polygon mirror abnormality
LSU TESTRESULT NG: PG
BW
LSU TESTRESULT NG: K CL
BW
LSU TESTRESULT NG: K CL
LSU check K color LD light emitting
abnormality
abnormality
LSU TESTRESULT NG: K BW
LSU TESTRESULT NG: CL
LSU TESTRESULT NG: CL
LSU check C color LD light emitting
abnormality
abnormality
Item
Default value
55/62-
sheet
machine
70-sheet
machine
machine
A
LASER POWER
MIDDLE FIERY (K)
MIDDLE FIERY (K)
Laser power setting
middle speed, black
middle speed, black
118
118
B
LASER POWER
MIDDLE FIERY (C)
MIDDLE FIERY (C)
Laser power setting
middle speed, cyan
middle speed, cyan
118
118
C
LASER POWER
MIDDLE FIERY (M)
MIDDLE FIERY (M)
Laser power setting
middle speed, magenta
middle speed, magenta
118
118
D
LASER POWER
MIDDLE FIERY (Y)
MIDDLE FIERY (Y)
Laser power setting
middle speed, yellow
middle speed, yellow
118
118
E
LASER POWER
LOW FIERY (K)
LOW FIERY (K)
Laser power setting
low speed, black
low speed, black
77
77
F
LASER POWER
LOW FIERY (C)
LOW FIERY (C)
Laser power setting
low speed, cyan
low speed, cyan
77
77
G
LASER POWER
LOW FIERY (M)
LOW FIERY (M)
Laser power setting
low speed, magenta
low speed, magenta
77
77
H
LASER POWER
LOW FIERY (Y)
LOW FIERY (Y)
Laser power setting
low speed, yellow
low speed, yellow
77
77
I
LASER POWER
HIGH FIERY (B/W)
HIGH FIERY (B/W)
Laser power setting
high speed, B/W
high speed, B/W
96
107
J
LASER POWER
MIDDLE FIERY (B/W)
MIDDLE FIERY (B/W)
Laser power setting
middle speed, B/W
middle speed, B/W
118
118
K
LASER POWER
LOW FIERY (B/W)
LOW FIERY (B/W)
Laser power setting
low speed, B/W
low speed, B/W
77
77
L
LASER LUT MIDDLE
FIERY (K)
FIERY (K)
Laser LUT select
middle speed, black
middle speed, black
0
0
M
LASER LUT MIDDLE
FIERY (C)
FIERY (C)
Laser LUT select
middle speed, cyan
middle speed, cyan
0
0
EXECUTE
SIMULATION NO.61-01
TEST
LSU TEST
PRESS [EXECUTE] TO START
1/1
CLOSE
MONO
COLOR
MX-7000N SIMULATION 7 – 91
61-3
Purpose
Adjustment/Setting
Function (Purpose) Used to set the laser power.
Section
Section
Operation/Procedure
1)
1)
Select a target mode for adjustment with [COPY] and [PRINT/
FAX] on the touch panel.
FAX] on the touch panel.
2)
Select a target item of the adjustment with [
↑] and [↓] keys on
the touch panel.
3)
Enter the adjustment value with 10-key.
4)
Press [OK] key. (The set value is saved.)
N
LASER LUT MIDDLE
FIERY (M)
FIERY (M)
Laser LUT select
middle speed, magenta
middle speed, magenta
0
0
O
LASER LUT MIDDLE
FIERY (Y)
FIERY (Y)
Laser LUT select
middle speed, yellow
middle speed, yellow
0
0
P
LASER LUT LOW
FIERY (K)
FIERY (K)
Laser LUT select low
speed, black
speed, black
0
0
Q
LASER LUT LOW
FIERY (C)
FIERY (C)
Laser LUT select low
speed, cyan
speed, cyan
0
0
R
LASER LUT LOW
FIERY (M)
FIERY (M)
Laser LUT select low
speed, magenta
speed, magenta
0
0
S
LASER LUT LOW
FIERY (Y)
FIERY (Y)
Laser LUT select low
speed, yellow
speed, yellow
0
0
T
LASER LUT HIGH
FIERY (B/W)
FIERY (B/W)
Laser LUT select high
speed, B/W
speed, B/W
0
0
U
LASER LUT MIDDLE
FIERY (B/W)
FIERY (B/W)
Laser LUT select
middle speed, B/W
middle speed, B/W
0
0
V
LASER LUT LOW
FIERY (B/W)
FIERY (B/W)
Laser LUT select low
speed, B/W
speed, B/W
0
0
Item
Default value
55/62-
sheet
machine
70-sheet
machine
machine
A
LASER POWER
MIDDLE (K)
MIDDLE (K)
Laser power setting middle
speed, black
speed, black
118
118
B
LASER POWER
MIDDLE (C)
MIDDLE (C)
Laser power setting middle
speed, cyan
speed, cyan
118
118
C
LASER POWER
MIDDLE (M)
MIDDLE (M)
Laser power setting middle
speed, magenta
speed, magenta
118
118
D
LASER POWER
MIDDLE (Y)
MIDDLE (Y)
Laser power setting middle
speed, yellow
speed, yellow
118
118
E
LASER POWER
LOW (K)
LOW (K)
Laser power setting low
speed, black
speed, black
77
77
F
LASER POWER
LOW (C)
LOW (C)
Laser power setting low
speed, cyan
speed, cyan
77
77
G
LASER POWER
LOW (M)
LOW (M)
Laser power setting low
speed, magenta
speed, magenta
77
77
Item
Default value
55/62-
sheet
machine
70-sheet
machine
machine
A : 118
LASER POWER MIDDLE FIERY (K)
B : 118
LASER POWER MIDDLE FIERY (C)
C : 118
LASER POWER MIDDLE FIERY (M)
D : 118
LASER POWER MIDDLE FIERY (Y)
A:
SIMULATION NO.61-02
LASER POWER AUTO SETUP[FIERY]
110
58
236
OK
TEST
CLOSE
E : 77
LASER POWER LOW FIERY (K)
F : 77
LASER POWER LOW FIERY (C)
G : 77
LASER POWER LOW FIERY (M)
H : 77
LASER POWER LOW FIERY (Y)
I : 96
LASER POWER HIGH FIERY (B/W)
J : 118
LASER POWER MIDDLE FIERY (B/W)
K : 77
LASER POWER LOW FIERY (B/W)
L :
0
LASER LUT MIDDLE FIERY (K)
H
LASER POWER
LOW (Y)
LOW (Y)
Laser power setting low
speed, yellow
speed, yellow
77
77
I
LASER POWER
HIGH (B/W)
HIGH (B/W)
Laser power setting high
speed, B/W
speed, B/W
96
107
J
LASER POWER
MIDDLE (B/W)
MIDDLE (B/W)
Laser power setting middle
speed, B/W
speed, B/W
118
118
K
LASER POWER
LOW (B/W)
LOW (B/W)
Laser power setting low
speed, B/W
speed, B/W
77
77
L
LASER POWER
DIFF (K2)
DIFF (K2)
K2 beam difference value
K (Difference for K1 beam)
K (Difference for K1 beam)
50
50
M
LASER LUT
MIDDLE (K)
MIDDLE (K)
Laser LUT select middle
speed, black
speed, black
0
0
N
LASER LUT
MIDDLE (C)
MIDDLE (C)
Laser LUT select middle
speed, cyan
speed, cyan
0
0
O
LASER LUT
MIDDLE (M)
MIDDLE (M)
Laser LUT select middle
speed, magenta
speed, magenta
0
0
P
LASER LUT
MIDDLE (Y)
MIDDLE (Y)
Laser LUT select middle
speed, yellow
speed, yellow
0
0
Q
LASER LUT LOW
(K)
(K)
Laser LUT select low
speed, black
speed, black
0
0
R
LASER LUT LOW
(C)
(C)
Laser LUT select low
speed, cyan
speed, cyan
0
0
S
LASER LUT LOW
(M)
(M)
Laser LUT select low
speed, magenta
speed, magenta
0
0
T
LASER LUT LOW
(Y)
(Y)
Laser LUT select low
speed, yellow
speed, yellow
0
0
U
LASER LUT HIGH
(BW)
(BW)
Laser LUT select high
speed, B/W
speed, B/W
0
0
V
LASER LUT
MIDDLE (BW)
MIDDLE (BW)
Laser LUT select middle
speed, B/W
speed, B/W
0
0
W
LASER LUT
LOW(BW)
LOW(BW)
Laser LUT select low
speed, B/W
speed, B/W
0
0
A
LASER POWER
PRINTER
MIDDLE (K)
PRINTER
MIDDLE (K)
Laser power setting (for
printer) middle speed,
black
printer) middle speed,
black
118
118
B
LASER POWER
PRINTER
MIDDLE (C)
PRINTER
MIDDLE (C)
Laser power setting (for
printer) middle speed,
cyan
printer) middle speed,
cyan
118
118
C
LASER POWER
PRINTER
MIDDLE (M)
PRINTER
MIDDLE (M)
Laser power setting (for
printer) middle speed,
magenta
printer) middle speed,
magenta
118
118
D
LASER POWER
PRINTER
MIDDLE (Y)
PRINTER
MIDDLE (Y)
Laser power setting (for
printer) middle speed,
yellow
printer) middle speed,
yellow
118
118
E
LASER POWER
PRINTER LOW
(K)
PRINTER LOW
(K)
Laser power setting (for
printer) low speed, black
printer) low speed, black
77
77
F
LASER POWER
PRINTER LOW
(C)
PRINTER LOW
(C)
Laser power setting (for
printer) low speed, cyan
printer) low speed, cyan
77
77
G
LASER POWER
PRINTER LOW
(M)
PRINTER LOW
(M)
Laser power setting (for
printer) low speed,
magenta
printer) low speed,
magenta
77
77
H
LASER POWER
PRINTER LOW
(Y)
PRINTER LOW
(Y)
Laser power setting (for
printer) low speed, yellow
printer) low speed, yellow
77
77
I
LASER POWER
PRINTER HIGH
(B/W)
PRINTER HIGH
(B/W)
Laser power setting (for
printer) high speed, B/W
printer) high speed, B/W
96
107
J
LASER POWER
PRINTER
MIDDLE (B/W)
PRINTER
MIDDLE (B/W)
Laser power setting (for
printer) middle speed, B/W
printer) middle speed, B/W
118
118
K
LASER POWER
PRINTER LOW
(B/W)
PRINTER LOW
(B/W)
Laser power setting (for
printer) low speed, B/W
printer) low speed, B/W
77
77
L
LASER PRINTER
LUT MIDDLE (K)
LUT MIDDLE (K)
Laser LUT select (for
printer) middle speed,
black
printer) middle speed,
black
0
0
M
LASER PRINTER
LUT MIDDLE (C)
LUT MIDDLE (C)
Laser LUT select (for
printer) middle speed,
cyan
printer) middle speed,
cyan
0
0
Item
Default value
55/62-
sheet
machine
70-sheet
machine
machine
MX-7000N SIMULATION 7 – 92
61-4
Purpose
Adjustment
Function (Purpose) Used to perform self printing of the LSU
position adjustment pattern.
Section
Operation/Procedure
1)
1)
Select a target item with [
↑] and [↓] keys on the touch panel.
2)
Enter the adjustment value with 10-key.
3)
Press [EXECUTE] key. Printing is started.
62
62-1
Purpose
Function (Purpose) Used to format the hard disk. (Excluding
Function (Purpose) Used to format the hard disk. (Excluding
the operation manual area.)
Section
Operation/Procedure
1)
1)
Press [EXECUTE] key.
2)
Press [YES] key.
Formatting the hard disk is started.
Formatting the hard disk is started.
62-2
Purpose
Operation test/Check
Function (Purpose) Used to check read/write of the hard disk
(partial).
Section
Operation/Procedure
1)
1)
Press [EXECUTE] key.
2)
Press [YES] key.
Read/write is executed.
Read/write is executed.
62-3
Purpose
Operation test/Check
Function (Purpose) Used to check read/write of the hard disk
(all areas).
Section
N
LASER PRINTER
LUT MIDDLE (M)
LUT MIDDLE (M)
Laser LUT select (for
printer) middle speed,
magenta
printer) middle speed,
magenta
0
0
O
LASER PRINTER
LUT MIDDLE (Y)
LUT MIDDLE (Y)
Laser LUT select (for
printer) middle speed,
yellow
printer) middle speed,
yellow
0
0
P
LASER PRINTER
LUT LOW (K)
LUT LOW (K)
Laser LUT select (for
printer) low speed, black
printer) low speed, black
0
0
Q
LASER PRINTER
LUT LOW (C)
LUT LOW (C)
Laser LUT select (for
printer) low speed, cyan
printer) low speed, cyan
0
0
R
LASER PRINTER
LUT LOW (M)
LUT LOW (M)
Laser LUT select (for
printer) low speed,
magenta
printer) low speed,
magenta
0
0
S
LASER PRINTER
LUT LOW (Y)
LUT LOW (Y)
Laser LUT select (for
printer) low speed, yellow
printer) low speed, yellow
0
0
T
LASER PRINTER
LUT HIGH (BW)
LUT HIGH (BW)
Laser LUT select (for
printer) high speed, B/W
printer) high speed, B/W
0
0
U
LASER PRINTER
LUT MIDDLE
(BW)
LUT MIDDLE
(BW)
Laser LUT select (for
printer) middle speed, B/W
printer) middle speed, B/W
0
0
V
LASER PRINTER
LUT LOW (BW)
LUT LOW (BW)
Laser LUT select (for
printer) low speed, B/W
printer) low speed, B/W
0
0
Item
Default value
A
MULTICOUNT
Print quantity
1
B
PAPER
MFT
Cassette
selection
selection
1: Manual feed
4
CS1
2: Cassette 1
CS2
3: Cassette 2
CS3
4: Cassette 3
CS4
5: Cassette 4
LCC
6: LCC
Item
Default value
55/62-
sheet
machine
70-sheet
machine
machine
A : 118
;
LASER POWER MIDDLE (K)
B : 118
;
LASER POWER MIDDLE (C)
C : 118
;
LASER POWER MIDDLE (M)
D : 118
;
LASER POWER MIDDLE (Y)
A:
SIMULATION NO.61-03
LASER POWER AUTO SETUP
118
58
236
OK
TEST
CLOSE
E : 77
;
LASER POWER LOW (K)
F : 77
;
LASER POWER LOW (C)
G : 77
;
LASER POWER LOW (M)
H : 77
;
LASER POWER LOW (Y)
I : 96
;
LASER POWER HIGH (B/W)
J : 118
;
LASER POWER MIDDLE (B/W)
K : 77
;
LASER POWER LOW (B/W)
L : 50
;
LASER POWER DIFF (K2)
COPY
PRINT/FAX
A : 1
;
MULTICOUNT
B : 4
;
PAPER : CS3
A:
SIMULATION NO.61-04
LSU POSITION ADJUSTMENT (SELF PRINT)
1
1
999
OK
TEST
CLOSE
EXECUTE
SIMULATION NO.62-01
TEST
HDD FORMAT
CLOSE
EXECUTE
ARE YOU SURE?
YES
NO
SIMULATION NO.62-02
TEST
HDD R/W TEST(PART)
CLOSE
EXECUTE
ARE YOU SURE?
YES
NO
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man46) service manuals if exist.