Sharp MX-5500N / MX-6200N / MX-7000N (serv.man46) Service Manual ▷ View online
MX-7000N SIMULATION 7 – 113
8
1, 2
FAX initial
setting
setting
Print document contents
when transmitting (results
sheet) <FAX only>
when transmitting (results
sheet) <FAX only>
Do not print
0 0
1
At times of error
Always print
0 1
0
At times of error
1 0
3
FAX initial
setting
setting
Automatic printing of the
record sheet when memory
is full
record sheet when memory
is full
1: Yes
0: No
0
No
Trigger printing of
200 entries.
200 entries.
4 - 8
FAX initial
setting
setting
Printing of the
communication record
sheet at a designated time
(hours)
communication record
sheet at a designated time
(hours)
Setting range
Binary input
Binary input
00 to 23
2-digit input
2-digit input
0
0 hour
For outside the set
range, the default
value is used.
range, the default
value is used.
0
0
0
0
0
0
0
9
1 - 6
FAX initial
setting
setting
Printing of the
communication record
sheet at a designated time
(minutes)
communication record
sheet at a designated time
(minutes)
Setting range
Binary input
Binary input
00 to 59
2-digit input
2-digit input
0
0 minute
For outside the set
range, the default
value is used.
range, the default
value is used.
0
0
0
0
0
0
0
0
0
7
FAX initial
setting
setting
Printing of the
communication record
sheet at a designated time
communication record
sheet at a designated time
1: Output
0: Do not output
0
Do not output
8
FAX initial
setting
setting
ECM (valid except during
V.34: reflected in the V.21
DIS/DCS/DTC)
V.34: reflected in the V.21
DIS/DCS/DTC)
1: No
0: Yes
0
Yes
ECM is on during
communication in
the V.34 mode.
communication in
the V.34 mode.
10
1 - 8
FAX initial
setting
setting
Remote changeover
number setting
number setting
Setting range
Binary input
Binary input
Upper 4 bits 0 - F
Lower 4 bits 0 - F
*=A
#=B
Lower 4 bits 0 - F
*=A
#=B
0
5*
When the value of
C - F is set, the
default value of "5"
is set.
C - F is set, the
default value of "5"
is set.
1
0
1
1
0
1
0
0
1
1
0
1
0
11
1 - 4
FAX initial
setting
setting
Distinctive ring (DRD
setting)
setting)
OFF
0 0 0 0
0
OFF
STANDARD
0 0 0 1
0
Pattern 1
1 0 0 0
0
Pattern 2
0 1 0 0
0
Pattern 3
1 1 0 0
Pattern 4
0 0 1 0
Pattern 5
1 0 1 0
ON (Australia)
0 1 1 0
ON (New Zealand)
1 1 1 0
ON (Hong Kong)
1 0 0 1
5 - 8
Not used
0
1
1
0
1
1
0
12
1, 2
Not used
0
0
0
3, 4
FAX initial
setting
setting
PBX setting
(Germany and France only)
(Germany and France only)
OFF
0 0
0
OFF
Flash
0 1
0
ID (number)
1 0
5 - 8
FAX initial
setting
setting
ID (number) setting
<Input the 1st digit when
dial inputting and dialing>
<Input the 1st digit when
dial inputting and dialing>
Binary input
Setting range
Setting range
0 to 15
When 10 -15 is selected, the default value of "0"
is set.
is set.
0
0
Enable when ID is
set in "PBX setting."
set in "PBX setting."
0
0
0
0
0
13
1 - 4
FAX initial
setting
setting
ID (number) setting 2
<Input the 2nd digit when
dial inputting and dialing>
<Input the 2nd digit when
dial inputting and dialing>
Binary input
Setting range
Setting range
0 to 15
When 10 - 12, 14, 15 are designated, do not use
numbers with those digits.
"-" when 13 is set.
numbers with those digits.
"-" when 13 is set.
1
Not used
Enable when ID is
set in "PBX setting."
set in "PBX setting."
1
0
1
0
1
5 - 8
FAX initial
setting
setting
IID (number) setting 3
<Input the 3rd digit when
dial inputting and dialing>
<Input the 3rd digit when
dial inputting and dialing>
Binary input
Setting range
Setting range
0 to 15
When 10 - 12, 14, 15 are designated, do not use
numbers with those digits.
"-" when 13 is set.
numbers with those digits.
"-" when 13 is set.
1
Not used
Enable when ID is
set in "PBX setting."
set in "PBX setting."
1
0
1
0
1
SW
No.
No.
Bit
No.
System
settings
Item
SW selection and function
Initial value
Remarks
MX-7000N SIMULATION 7 – 114
14
1
FAX initial
setting
setting
External telephone
connection
connection
1: Yes
0: No
1
Yes
2 - 8
Not used
0
1
0
0
0
0
0
1
0
0
0
0
0
15
1 - 8
Adjustment
value
value
Signal sending level
Binary input
Setting range
Setting range
0 to 26
"00001010": -10dBm
(North America/China/
Singapore/Thailand/
Malaysia/Philippine/
Hong Kong/Middle
East/Other3)
"00001011": -11dBm
(Australia/New
Zealand/India/Taiwan/
Rusia)
"00001001": -9dBm
(Other country)
(North America/China/
Singapore/Thailand/
Malaysia/Philippine/
Hong Kong/Middle
East/Other3)
"00001011": -11dBm
(Australia/New
Zealand/India/Taiwan/
Rusia)
"00001001": -9dBm
(Other country)
When set over the
max. send level, the
max. value of the
destination is used.
(For North America
and China, there is
no limitation on the
max. send level.)
max. send level, the
max. value of the
destination is used.
(For North America
and China, there is
no limitation on the
max. send level.)
When the set value is 27 - 255, it is regarded as 26.
The send level to the line is virtually the set value.
Max. send level limitation:
China: 0dBm
Australia, New Zealand, Taiwan: -10dBm (11 or
less)
Europe: -10dBm (9 or less)
Indonesia: -5 to -13dBm
The send level to the line is virtually the set value.
Max. send level limitation:
China: 0dBm
Australia, New Zealand, Taiwan: -10dBm (11 or
less)
Europe: -10dBm (9 or less)
Indonesia: -5 to -13dBm
Singapore: -6dBm
India: -3dBm or less
Middle East, Slovakia, Other3: No limitation for the
Middle East, Slovakia, Other3: No limitation for the
standards
Rusia: -11dBm
16
1 - 8
Not used
"00000000": North America/Taiwan/
Middle East/Other3
"00010000": China/Hong Kong
"00110000": India
"01010000": Indonesia/Thailand/Malaysia/
Philippine
"01100000": Singapore/South Africa
"10100000": Australia/Rusia
"10000000": Other country
Middle East/Other3
"00010000": China/Hong Kong
"00110000": India
"01010000": Indonesia/Thailand/Malaysia/
Philippine
"01100000": Singapore/South Africa
"10100000": Australia/Rusia
"10000000": Other country
17
1
FAX
transmission
setting
transmission
setting
Automatic reduced
transmission
transmission
1: Normal
0: Reduction
0
Reduction
2
FAX
transmission
setting
transmission
setting
Rotated transmission
selection (A4
selection (A4
→ A4R)
1: No
0: Yes
0
Yes
Rotated
transmission or not
depending on
orientation of the
document.
transmission or not
depending on
orientation of the
document.
17
3
FAX
transmission
setting
transmission
setting
Rotated transmission
selection (B5R
selection (B5R
→ B5)
1: No
0: Yes
0
Yes
Rotated
transmission or not
depending on
orientation of the
document.
(16K
transmission or not
depending on
orientation of the
document.
(16K
A4)
4
FAX
transmission
setting
transmission
setting
Rotated transmission
selection (A5R
selection (A5R
→ A5)
1: No
0: Yes
0
Yes
Rotated
transmission or not
depending on
orientation of the
document.
(INVOICE
transmission or not
depending on
orientation of the
document.
(INVOICE
A5)
5
FAX
transmission
setting
transmission
setting
Rotated transmission
selection
(8.5 x 11
selection
(8.5 x 11
→ 8.5 x 11R)
1: No
0: Yes
0
Yes
Rotated
transmission or not
depending on
orientation of the
document.
transmission or not
depending on
orientation of the
document.
6
FAX
transmission
setting
transmission
setting
Rotated transmission
selection (16K
selection (16K
→ 16KR)
1: No
0: Yes
0
Yes
Rotated
transmission or not
depending on
orientation of the
document.
(16K
transmission or not
depending on
orientation of the
document.
(16K
A4)
7
FAX
transmission
setting
transmission
setting
Rotated transmission
selection
(5.5 x 8.5R
selection
(5.5 x 8.5R
→ 5.5 x 8.5)
1: No
0: Yes
0
Yes
Rotated
transmission or not
depending on
orientation of the
document.
(INVOICE
transmission or not
depending on
orientation of the
document.
(INVOICE
A5)
8
FAX
transmission
setting
transmission
setting
Page number printing
1: No
0: Yes
0
Yes
SW
No.
No.
Bit
No.
System
settings
Item
SW selection and function
Initial value
Remarks
ѳ
ѳ
ѳ
ѳ
MX-7000N SIMULATION 7 – 115
18
1
FAX
transmission
setting
transmission
setting
Designation of date and
source printing position
source printing position
1: Upper side of a
document (in send data)
document (in send data)
0: Outside of a
document (outside send
data)
document (outside send
data)
0
Outside of a
document
document
2
FAX
transmission
setting
transmission
setting
Quick online/Memory
transmission changeover
(quick online transmission)
transmission changeover
(quick online transmission)
1: Memory transmission
0: Quick online
transmission
transmission
0
Quick online
transmission
transmission
3
FAX
transmission
setting
transmission
setting
Designation of date and
source printing
source printing
1: Not apply
0: Apply
0
Apply
For North America,
the sender is
always specified.
the sender is
always specified.
4
FAX
transmission
setting
transmission
setting
Re-call permitted when
busy
busy
1: Re-call permitted
when busy
when busy
0: Re-call prohibited
when busy
when busy
1
Permitted
5 - 8
FAX
transmission
setting
transmission
setting
Number of re-calls when
busy
busy
Binary input
Setting range
Setting range
North America: 1 to 14
Australia/New Zealand/Singapore: 1 to 9
U.K./France/Germany/Sweden: 1 to 10
Indonesia: 1 to 5
U.K./France/Germany/Sweden: 1 to 10
Indonesia: 1 to 5
China: 1 to 3
Other country: 1 to 15
Number of recalls
Set value x once
0
2 times
For outside the set
range, the default
value is used.
range, the default
value is used.
0
1
0
1
0
19
1 - 4
FAX
transmission
setting
transmission
setting
Interval between re-calls
when busy
when busy
Binary input
Setting range
Setting range
Indonesia/Taiwan: 4 to 15
Other country: 1 to 15
Re-call interval
Set value x 1 minute
"0100": 4 minutes
(Indonesia/Taiwan)
"0011": 3 minutes
(Other country)
(Indonesia/Taiwan)
"0011": 3 minutes
(Other country)
For outside the set
range, the default
value is used.
range, the default
value is used.
5 - 8
FAX
transmission
setting
transmission
setting
Number of re-calls at times
of communication error
of communication error
Binary input
Setting range
Setting range
North America/Australia/New Zealand: Once only
U.K./France/Germany/Sweden/Indonesia: 1 to 5
China: 1 to 3
U.K./France/Germany/Sweden/Indonesia: 1 to 5
China: 1 to 3
Malaysia/India: 1 to 9
Other country: 1 to 15
Number of recalls
Set value x once
"0010": 2 times
(China/Singapore/
Indonesia/Thailand/
Malaysia/India/
Philippine/Hong Kong/
Taiwan)
"0001": 1 time
(Other country)
(China/Singapore/
Indonesia/Thailand/
Malaysia/India/
Philippine/Hong Kong/
Taiwan)
"0001": 1 time
(Other country)
For outside the set
range, the default
value is used.
range, the default
value is used.
20
1 - 4
FAX
transmission
setting
transmission
setting
Re-call interval at times of
communication error
communication error
Binary input
Setting range
Setting range
Indonesia: 4 to 15 minutes
Other country: 1 to 15 minutes
Other country: 1 to 15 minutes
Re-call interval
Set value x 1 minute
"0011": 3 minutes
(North America/
Australia/New
Zealand)
"0100": 4 minutes
(Indonesia)
"0001": 1 minute
(Other country)
(North America/
Australia/New
Zealand)
"0100": 4 minutes
(Indonesia)
"0001": 1 minute
(Other country)
For outside the set
range, the default
value is used.
range, the default
value is used.
5
FAX
transmission
setting
transmission
setting
Re-call permitted at times of
communication error
communication error
1: Re-call permitted at
times of communication
error
times of communication
error
0: Re-call prohibited at
times of communication
error
times of communication
error
1
Permitted
20
6
FAX
reception
setting
reception
setting
Automatic reduced printing
to fixed sizes
to fixed sizes
1: Discard
0: Reduction
0
Reduction
7
FAX
reception
setting
reception
setting
Setting to reduce and
discard when printing
A3-11 x 17 (reduced
printing setting when
receiving A3)
discard when printing
A3-11 x 17 (reduced
printing setting when
receiving A3)
1: Discard
0: Reduction
1
Discard
When in reduction,
94% for all.
94% for all.
8
FAX
reception
setting
reception
setting
Reduced print setting when
receiving letters
receiving letters
1: Discard
0: Reduction
1
Discard
21
1 - 4
FAX
reception
setting
reception
setting
Setting of the number of
automatic reception calls
automatic reception calls
Binary input
Setting range
Setting range
Europe/Indonesia/Thailand: 0 to 9 times
Australia/New Zealand: 2 to 4 times
Other country: 0 to 15 times
Australia/New Zealand: 2 to 4 times
Other country: 0 to 15 times
0
2 times
If 0 is set, the call
sound will not be
sounded.
(However, this does
not include the
nighttime FAX
mode.)
sound will not be
sounded.
(However, this does
not include the
nighttime FAX
mode.)
0
1
0
1
0
5
FAX
reception
setting
reception
setting
Double-faced printing of
received data (double-faced
reception setting)
received data (double-faced
reception setting)
1: Double-faced printing
permitted
permitted
0: Double-faced printing
prohibited
prohibited
0
Double-faced
printing prohibited
printing prohibited
6, 7
FAX
reception
setting
reception
setting
Setting of received data
print conditions
print conditions
Equal magnification/
Reduction permitted
Reduction permitted
0 0
0
Equal
magnification/
Reduction
permitted
magnification/
Reduction
permitted
Equal magnification/
Division prohibited/
Reduction prohibited
Division prohibited/
Reduction prohibited
0 1
0
Equal magnification/
Division permitted
Division permitted
1 0
Same action as initial
value
value
1 1
8
FAX
reception
setting
reception
setting
Designated number
reception refusal setting
(FAX)
reception refusal setting
(FAX)
1: Receipt of designated
number is refused (valid)
number is refused (valid)
0: Receipt of designated
number is not refused
(invalid)
number is not refused
(invalid)
0
Receipt of
designated
number is not
refused (invalid)
designated
number is not
refused (invalid)
SW
No.
No.
Bit
No.
System
settings
Item
SW selection and function
Initial value
Remarks
MX-7000N SIMULATION 7 – 116
22
1
FAX
reception
setting
reception
setting
FAX delivery tray setting
(without finisher attached)
(without finisher attached)
1: Right tray
0: Center tray
0
Center tray
FAX delivery tray setting
(with finisher attached)
(with finisher attached)
1: Right tray
0: Finisher tray
Finisher tray
2
(*)
FAX delivery tray setting
(Upper/lower setting when
the 4K finisher is installed)
(Upper/lower setting when
the 4K finisher is installed)
1: Lower tray
0: Upper tray
0
Upper tray
3
Device
setting
setting
Staple setting
1: Yes
0: No
0
No
4, 5
Device
setting
setting
Staple position
Rear 1 point
0 0
0
Rear 1 point
Front 1 point
0 1
0
Center 2 points
1 0
Same action as initial
value
value
1 1
6, 7
FAX
reception
setting
reception
setting
Selection of delivered sheet
size
size
A4 or A3
(8.5 x 11 or 11 x 17)
(8.5 x 11 or 11 x 17)
0 0
0
A4 or A3 (8.5 x 11
or 11 x 17)
or 11 x 17)
B5 or B4
(8.5 x 11 or 8.5 x 14)
(8.5 x 11 or 8.5 x 14)
0 1
0
A4 (8.5 x 11)
1 0
A4R (8.5 x 11R)
1 1
8
Valid/Invalid setting of FAX
A4, letter threshold
A4, letter threshold
1: Invalid
0: Valid
0
Valid
23
1
FAX
reception
setting
reception
setting
Setting for changing over to
automatic reception during
manual reception
automatic reception during
manual reception
1: Permitted
(changeover)
(changeover)
0: Prohibited (do not
changeover)
changeover)
0
Prohibited
The number of calls
is set in "Setting of
the number of calls
for changing over
from manual to
automatic
reception."
is set in "Setting of
the number of calls
for changing over
from manual to
automatic
reception."
2 - 6
FAX
reception
setting
reception
setting
Setting of the number of
calls for changing over from
manual to automatic
reception (Selection setting
from manual reception to
automatic reception)
calls for changing over from
manual to automatic
reception (Selection setting
from manual reception to
automatic reception)
Binary input
1 to 9 times
Setting range
1 time intervals
The number of calls for changing
Set value + 1
0
9 times
Function setting for
"Setting for
changing over to
automatic reception
during manual
reception"
For outside the set
range, the default
value is used.
Functions only in
France.
"Setting for
changing over to
automatic reception
during manual
reception"
For outside the set
range, the default
value is used.
Functions only in
France.
1
0
0
0
0
0
0
23
7
Polling
protection
setting
protection
setting
Polling protection
1: Do not protect
0: Protect
0
Protect
8
Switch to sorting in order of
numbers on the address list
numbers on the address list
1: Registered number
order
order
0: Search number order
0
Search number
order
order
24
1
Receiver off-hook (External
telephone)
telephone)
1: Warns off-hook state
of the external
telephone.
of the external
telephone.
0: Does not warn off-
hook state of the
external telephone.
hook state of the
external telephone.
"0": Does not warn off-
hook state of the
external telephone.
(North America/
Australia/New
Zealand/China/
Singapore/Indonesia/
Thailand/Malaysia/
India/Philippine/Hong
Kong/Taiwan/Middle
East/Other3)
"1": Warns off-hook
state of the external
telephone.
(Other country)
hook state of the
external telephone.
(North America/
Australia/New
Zealand/China/
Singapore/Indonesia/
Thailand/Malaysia/
India/Philippine/Hong
Kong/Taiwan/Middle
East/Other3)
"1": Warns off-hook
state of the external
telephone.
(Other country)
Limited by the TEL/
LIU PWB.
LIU PWB.
2 - 5
Not used
1
0
0
0
0
0
0
6
Scope of line sound monitor
1: All
0: Until NSF signal send/
receive
receive
0
Until NSF signal
send/receive
send/receive
7, 8
(*)
Volume setting of call sound
(large)
(large)
Volume level 9
0 0
1
Volume level 13
Related to BZ
Calling sound/
Communication end
sound (Normal,
Error)
Calling sound/
Communication end
sound (Normal,
Error)
Volume level 11
0 1
0
Volume level 13
1 0
Volume level 15
1 1
SW
No.
No.
Bit
No.
System
settings
Item
SW selection and function
Initial value
Remarks
Click on the first or last page to see other MX-5500N / MX-6200N / MX-7000N (serv.man46) service manuals if exist.