Sharp MX-4110N / MX-4111N / MX-4112N / MX-4110FN / MX-4111FN / MX-5110N / MX-5111N / MX-5112N / MX-5110FN / MX-5111FN (serv.man12) Service Manual ▷ View online
MX-5111N MX-DS15 (STAND) 5 – 3
4)
Lift the connection plates, and fix them with the fixing screws
(Packed items).
(Packed items).
5)
Install the connection plate covers.
2
1
2
1
: '11/Jul/25
1
MX-5111N MX-LC11 (LARGE CAPACITY TRAY) 6 – 1
MX-5111N
Service Manual
[6] MX-LC11 (LARGE CAPACITY TRAY)
1. Unpacking
A. Removal of the large capacity tray unit
B. Removal of the fixing material and packing
parts
C. Packed items check
2. Installation
NOTE: Before installation, be sure to turn both the operation and
main power switches off and disconnect the power plug
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.
A. Release the lock
1)
Remove the paper feed desk fixing screw.
NOTE: Before turning on the power, check to insure that the fixing
screw of the tray is removed. If the power is turned on with-
out removing the fixing screw, a trouble may be resulted.
out removing the fixing screw, a trouble may be resulted.
No.
Name
Quantity
1
Mounting plate upper
2
2
Connection unit
1
3
Fixing screw A (Hexagon with seat, S-tight, M4 x 35)
4
4
Fixing screw B (Hexagon with seat, S-tight, M4 x 12)
2
5
Fixing screw C (screw 4 x 8 cup)
1
1
3
4
2
5
MX-5111N MX-LC11 (LARGE CAPACITY TRAY) 6 – 2
B. Connection of the main unit and the large
capacity tray unit
1)
Install the mounting plate upper (Packed items) to the right
side of the main unit with the fixing screw A (Packed items).
* When installing, put the rubber section of the mounting plate
side of the main unit with the fixing screw A (Packed items).
* When installing, put the rubber section of the mounting plate
upper on the lower side.
2)
Remove the right door cover from the machine.
3)
Disengage the pawl, and remove the right adjuster.
4)
Remove the screw cap, and remove the screw.
5)
Remove the cover.
6)
Temporarily fix the fixing screw B (Packed items) midway.
7)
Insert the temporarily fixed screw B into the key hole in the
connection unit (Packed items), and temporarily fix the con-
nection unit.
connection unit (Packed items), and temporarily fix the con-
nection unit.
8)
Fix the other fixing screw B (Packed items), and tighten the
temporarily fixed screw B securely.
temporarily fixed screw B securely.
1
2
3
3
1
1
2
1
2
1
2
1
2
MX-5111N MX-LC11 (LARGE CAPACITY TRAY) 6 – 3
9)
While lifting the section marked with , insert the connection
unit into the large capacity tray unit, and fix the fixing screw C
(Packed items) at the mark A on the connection unit.
unit into the large capacity tray unit, and fix the fixing screw C
(Packed items) at the mark A on the connection unit.
C. Height adjustment of the large capacity tray
unit
1)
Put the large capacity tray unit closer to the main unit.
2)
Check to insure that the height adjustment check rib of the
large capacity tray unit and the axis line of the mounting plate
upper mounted to the main unit are in the same line.
large capacity tray unit and the axis line of the mounting plate
upper mounted to the main unit are in the same line.
3)
If the height adjustment is not required, insert the large capac-
ity tray unit further more.
If the height adjustment is required, perform the adjustment
procedures from 4).
ity tray unit further more.
If the height adjustment is required, perform the adjustment
procedures from 4).
4)
Loosen the adjustment screw on the F side.
* Use the adjustment screw on the front side for the adjust-
* Use the adjustment screw on the front side for the adjust-
ment. Do not touch the screw on the rear side.
5)
In the case of a shift to the right, press the front upper section
and fit the height adjustment check rib so that it is in the same
line with the axis line of the mounting plate upper. Insert the
large capacity tray unit into the main unit.
and fit the height adjustment check rib so that it is in the same
line with the axis line of the mounting plate upper. Insert the
large capacity tray unit into the main unit.
2
1
[Shift to the left]
[Shift to the right]
NOTE:
If the screw is loosened or removed when servicing, be sure
to execute "C. Height adjustment of the large capacity tray
unit" after completion of servicing.
to execute "C. Height adjustment of the large capacity tray
unit" after completion of servicing.
Click on the first or last page to see other MX-4110N / MX-4111N / MX-4112N / MX-4110FN / MX-4111FN / MX-5110N / MX-5111N / MX-5112N / MX-5110FN / MX-5111FN (serv.man12) service manuals if exist.