Sharp MX-4110N / MX-4111N / MX-4112N / MX-4110FN / MX-4111FN / MX-5110N / MX-5111N / MX-5112N / MX-5110FN / MX-5111FN (serv.man12) Service Manual ▷ View online
MX-5111N Dehumidifying heater 3 – 11
(6) Paper feed unit attachment
1)
Attach the paper feed unit.
2)
Attach the upper cabinet.
3)
Close the upper cover.
4)
Insert the paper feed tray.
(7) Connector connection
1)
Remove the connector cover.
2)
Connect the connector, and tighten the screw.
H. Operation check after installation
1)
Turn on the dehumidifier heater switch.
2
1
2
2
1
3
3
2
2
1
1
2
MX-5111N Dehumidifying heater 3 – 12
2)
Measure the resistance value between the earth terminal and
the AC terminal (L side), and between the earth terminal and
AC terminal (N side) with the circuit tester, and confirm they
are not short-circuited.
the AC terminal (L side), and between the earth terminal and
AC terminal (N side) with the circuit tester, and confirm they
are not short-circuited.
3)
When not using the heater after checking, turn off the dehu-
midifier heater switch.
midifier heater switch.
MX-5111N MX-DE15/DE16 (STAND/1x500/2x500 SHEET PAPER DRAWER) 4 – 1
MX-5111N
Service Manual
[4] MX-DE15/DE16 (STAND/1x500/2x500 SHEET PAPER DRAWER)
1. Unpacking
A. Removal of the desk unit
B. Removal of the fixing material and packing
parts
* If the connector is removed first, it may be pinched in the install-
ing procedures. Therefore, keep it packed when unpacking the
package, and unpack it when connecting the connector to the
machine.
package, and unpack it when connecting the connector to the
machine.
C. Packed items check
2. Installation
NOTE: Before installation, be sure to turn both the operation and
main power switches off and disconnect the power plug
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.
A. Installation of the adjuster
1)
Install the right adjuster (Packed items) to the desk unit.
2)
Turn each adjuster to fix the desk unit.
No.
Name
Quantity
1
Right adjuster
1
2
Fixing screws (M4 x 8)
4
1
2
MX-5111N MX-DE15/DE16 (STAND/1x500/2x500 SHEET PAPER DRAWER) 4 – 2
B. Connection of the main unit and the desk unit
1)
Remove the connection plate covers of the both sides of the
main unit.
main unit.
2)
Put the main unit on the desk unit.
* Use man power of four persons or more to lift the main unit.
* Use man power of four persons or more to lift the main unit.
* Place the main unit on the desk unit slowly by fitting the
external lines. Check to insure that the positioning pin on the
top of the desk unit is securely engaged in the positioning
groove of the main unit.
top of the desk unit is securely engaged in the positioning
groove of the main unit.
3)
Remove the No. 2 paper feed tray.
4)
Pull out the No. 3 paper feed tray until it stops.
5)
Lift the connection plates on the right and left of the main unit
front side, and fix them with the fixing screws (Packed items).
front side, and fix them with the fixing screws (Packed items).
1
2
2
1
1
2
Click on the first or last page to see other MX-4110N / MX-4111N / MX-4112N / MX-4110FN / MX-4111FN / MX-5110N / MX-5111N / MX-5112N / MX-5110FN / MX-5111FN (serv.man12) service manuals if exist.