Sharp MX-4110N / MX-4111N / MX-4112N / MX-4110FN / MX-4111FN / MX-5110N / MX-5111N / MX-5112N / MX-5110FN / MX-5111FN (serv.man12) Service Manual ▷ View online
MX-5111N MX-TU13 (EXIT TRAY CABINET) 8 – 1
MX-5111N
Service Manual
[8] MX-TU13 (EXIT TRAY CABINET)
1. Unpacking
A. Packed items check
2. Installation
NOTE: Before installation, be sure to turn both the operation and
main power switches off and disconnect the power plug
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.
A. Paper exit tray attachment
1)
Open the front cabinet, and remove the front cabinet upper.
2)
Attach the paper exit tray (Packed items), and fix it with the
screw (Packed items).
screw (Packed items).
3)
Attach the front cabinet upper, and close the front cabinet.
4)
Attach the paper holding arm (Packed items).
5)
Attach the full detection actuator (Packed items).
NOTE: Be careful of the installing direction of the full detection
actuator.
No.
Name
Quantity
1
Paper exit tray
1
2
Screw
4
3
Paper holding arm
1
4
Full detection actuator
1
5
Paper exit cover
1
2
1
3
4
5
MX-5111N MX-TU13 (EXIT TRAY CABINET) 8 – 2
6)
Attach the paper exit cover (Packed items).
B. Turn ON the power of the main unit
1)
Connect the power plug of the machine to the power outlet,
and turn ON the main power switch and the operation panel
power switch.
and turn ON the main power switch and the operation panel
power switch.
MX-5111N MX-FNX9 (FINISHER) 9 – 1
MX-5111N
Service Manual
[9] MX-FNX9 (FINISHER)
1. Unpacking
A. Removal of the inner finisher
* When removing the inner finisher, lift it as shown in the table
below.
B. Removal of the fixing tape and protection
material
C. Packed items check
No.
Name
Quantity
1
Finisher fixing plate
1
2
Front slide rail
1
3
Dummy punch unit
1
4
Front open/close cover
1
5
Punch cover
1
6
Left front cover
1
7
Finisher slide stopper
1
8
Fixing screw
8
9
Resin clip
1
10
Coin screw
1
11
Staple position label (For scanner)
1
12
Staple position label (For RSPF/DSPF)
1
13
Punch position label (For scanner)
1
14
Punch position label (For RSPF/DSPF)
1
10
11
12
13
14
1
4
8
9
2
5
6
7
3
MX-5111N MX-FNX9 (FINISHER) 9 – 2
2. Installation
NOTE: Before installation, be sure to turn both the operation and
main power switches off and disconnect the power plug
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.
from the power outlet. Make double sure that the data lamp
on the operation panel does not light up or blink when per-
forming installation.
A. Removal of the paper holding arm unit
1)
Push up the section A to disengage the pawl, and remove the
paper holding arm and the paper holding arm holder together
as a unit.
* Be careful to remove both of the paper holding arm (which is
paper holding arm and the paper holding arm holder together
as a unit.
* Be careful to remove both of the paper holding arm (which is
easily removed alone) and the paper holding arm holder.
B. Installation of the inner finisher
1)
Open the front cabinet. Remove two screws, and remove the
front cabinet upper.
front cabinet upper.
2)
Disengage two pawls, and remove the paper exit tray cover.
3)
Remove four screws, and remove the paper exit tray.
* When removing the paper exit tray, there is no need to
* When removing the paper exit tray, there is no need to
remove the screws in the section (A).
4)
Remove the paper exit full detection actuator.
5)
Engage the projection on the main unit frame with the hole in
the finisher fixing plate (Packed items).
the finisher fixing plate (Packed items).
6)
Fix the right cover plate with the fixing screw (Packed items).
* Fix the side plate of the paper exit shifter with the fixing
guide.
2
1
A
A
Click on the first or last page to see other MX-4110N / MX-4111N / MX-4112N / MX-4110FN / MX-4111FN / MX-5110N / MX-5111N / MX-5112N / MX-5110FN / MX-5111FN (serv.man12) service manuals if exist.