Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man30) User Manual / Operation Manual ▷ View online
1-102
BEFORE USING THE MACHINE►PERIPHERAL DEVICES
4
Remove the empty staple cartridge
from the staple case.
from the staple case.
5
Insert a new staple cartridge into the
staple case as shown.
staple case as shown.
Push the staple cartridge in until it clicks into place.
6
Push the staple case.
Push the staple case in until it clicks into place.
7
Close the finisher front cover.
Make a proof copy in staple sort function to verify that stapling takes place correctly.
1-103
BEFORE USING THE MACHINE►PERIPHERAL DEVICES
FINISHER
This device outputs sorted paper while staggering each set of paper. As needed, it staples each set. To punch holes in
printed paper, install an optional hole punch module.
printed paper, install an optional hole punch module.
PART NAMES
(1)
Output tray
Stapled and offset output is delivered to this tray.
The tray is slidable. To print on large paper such as A3
paper, extend the tray.
Stapled and offset output is delivered to this tray.
The tray is slidable. To print on large paper such as A3
paper, extend the tray.
(2)
Staple compiler
This temporarily stacks paper to be stapled.
This temporarily stacks paper to be stapled.
(3)
Top cover
Open this cover to remove a paper misfeed.
Open this cover to remove a paper misfeed.
(4)
Front cover
Open this cover to replace the staple cartridge or remove
a staple jam.
Open this cover to replace the staple cartridge or remove
a staple jam.
(1)
(2)
(3)
(4)
• To install a finisher, a paper pass unit and stand/550/2x550/3x550/550&2100 sheet paper drawer are required.
• A finisher cannot be installed simultaneously with an inner finisher or saddle stitch finisher.
• Do not place heavy objects on the saddle stitch finisher or press down on the finisher.
• Exercise caution when you turn on the power and when printing take place, as the tray may move up and down.
• A finisher cannot be installed simultaneously with an inner finisher or saddle stitch finisher.
• Do not place heavy objects on the saddle stitch finisher or press down on the finisher.
• Exercise caution when you turn on the power and when printing take place, as the tray may move up and down.
1-104
BEFORE USING THE MACHINE►PERIPHERAL DEVICES
SUPPLIES
The finisher (large stacker) requires the following staple cartridge:
Staple cartridge (approx. 5000 staples per cartridge x three cartridges)
MX-SCX1
Staple cartridge (approx. 5000 staples per cartridge x three cartridges)
MX-SCX1
FINISHER MAINTENANCE
When the staple cartridge runs out of staples, a message will appear in the operation panel. Follow the operation
procedure to replace the staple cartridge.
procedure to replace the staple cartridge.
Replacement the staple cartridge
1
Open the front cover.
2
Pull out the staple unit.
3
Remove the staple case.
1-105
BEFORE USING THE MACHINE►PERIPHERAL DEVICES
4
Remove the empty staple cartridge
from the staple case.
from the staple case.
5
Insert a new staple cartridge into the
staple case as shown.
staple case as shown.
Push the staple cartridge in until it clicks into place.
6
Push the staple case firmly back in.
Push the staple case in until it clicks into place.
7
Replace the staple unit.
8
Close the front cover.
Make a proof copy in staple sort function to verify that stapling takes place correctly.
Click on the first or last page to see other MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man30) service manuals if exist.