Sharp MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man30) User Manual / Operation Manual ▷ View online
1-106
BEFORE USING THE MACHINE►PERIPHERAL DEVICES
SADDLE STITCH FINISHER
This includes the offset function that outputs sorted paper while staggering each set of paper, the staple sort function
that staples each set of prints, the saddle stitch function that automatically staples the center of the sheets and folds the
sheets in half, and the paper folding function that folds paper in half.
To punch holes in printed paper, install an optional hole punch module.
that staples each set of prints, the saddle stitch function that automatically staples the center of the sheets and folds the
sheets in half, and the paper folding function that folds paper in half.
To punch holes in printed paper, install an optional hole punch module.
PART NAMES
(1)
Output tray
Stapled and offset output is delivered to this tray.
The tray is slidable. To print on large paper such as A3
paper, extend the tray.
Stapled and offset output is delivered to this tray.
The tray is slidable. To print on large paper such as A3
paper, extend the tray.
(2)
Staple compiler
This temporarily stacks paper to be stapled.
This temporarily stacks paper to be stapled.
(3)
Top cover
Open this cover to remove a paper misfeed.
Open this cover to remove a paper misfeed.
(4)
Saddle stitch tray
Saddle-stitched output is delivered to this tray.
Saddle-stitched output is delivered to this tray.
(5)
Front cover
Open this cover to replace the staple cartridge, remove a
staple jam, or remove a paper misfeed.
Open this cover to replace the staple cartridge, remove a
staple jam, or remove a paper misfeed.
(1)
(2)
(3)
(5)
(4)
• To install a saddle stitch finisher, a paper pass unit and stand/550/2x550/3x550/550&2100 sheet paper drawer are
required.
• Do not place heavy objects on the saddle finisher or press down on the saddle stitch finisher.
• Exercise caution when you turn on the power and when printing take place, as the tray may move up and down.
• A saddle stitch finisher cannot be installed simultaneously with an inner finisher or finisher.
• Exercise caution when you turn on the power and when printing take place, as the tray may move up and down.
• A saddle stitch finisher cannot be installed simultaneously with an inner finisher or finisher.
1-107
BEFORE USING THE MACHINE►PERIPHERAL DEVICES
SUPPLIES
The saddle stitch finisher requires the following staple cartridge:
Staple cartridge (approx. 5000 staples per cartridge x three cartridges)
AR-SC2
AR-SC2
SADDLE STITCH FINISHER MAINTENANCE
When the staple cartridge runs out of staples, a message will appear in the operation panel. Follow the operation
procedure to replace the staple cartridge.
procedure to replace the staple cartridge.
1
Open the front cover.
2
Pull the lever and withdraw the staple
unit.
unit.
Pull it slowly out until it stops.
3
Lower the staple case release lever
and remove the staple case.
and remove the staple case.
1-108
BEFORE USING THE MACHINE►PERIPHERAL DEVICES
4
Remove the empty staple cartridge
from the staple case.
from the staple case.
5
Insert a new staple cartridge into the
staple case as shown.
staple case as shown.
Push the staple cartridge in until it clicks into place.
After inserting the staple cartridge, pull the seal that holds
the staples straight out.
After inserting the staple cartridge, pull the seal that holds
the staples straight out.
Do not remove the seal from the cartridge before inserting the cartridge into the case.
6
Attach the staple case.
Push the staple case in until it clicks into place.
7
Push the staple unit back in.
1-109
BEFORE USING THE MACHINE►PERIPHERAL DEVICES
8
Close the front cover.
Make a proof copy in staple sort function to verify that stapling takes place correctly.
Click on the first or last page to see other MX-3050N / MX-3060N / MX-3070N / MX-3550N / MX-3560N / MX-3570N / MX-4050N / MX-4060N / MX-4070N (serv.man30) service manuals if exist.