Sharp MX-2610N / MX-3110N / MX-3610N (serv.man18) User Manual / Operation Manual ▷ View online
OPERATION GUIDE - TURNING ON THE POWER
file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/01-011.htm[24/03/2011 2:56:06 PM]
Index
Contents
In order for some settings to take effect, the machine must be restarted. In some
states of the machine, restarting with the [Power] button may not make the
settings take effect. In this case, turn off the main power switch and then turn it
on again.
OPERATION GUIDE - PREHEAT MODE
file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/01-012.htm[24/03/2011 2:56:06 PM]
MX-2610N / MX-3110N / MX-3610N
PREHEAT MODE
Index
Contents
OPERATIONS COMMON TO ALL MODES
This mode lowers the temperature of the fusing unit and makes the machine wait in low power
consumption state.
Preheat mode will activate when the set duration of time elapses in waiting status without
executing a job.
Compared to Auto Power Shut-Off Timer, the amount of energy saved is less and the wakeup
time is shorter.
In the preheat mode, the [Home Screen] button is lit and the light goes off for the touch panel
and the [Power Save Mode] button. The touch panel remains displayed.
The touch panel is cleared when it is tapped or the [Home Screen] button is pressed.
To set preheat mode:
In "Setting mode", select [Energy Save] → [Preheat Mode Setting].
In "Setting mode", select [Energy Save] → [Preheat Mode Setting].
OPERATION GUIDE - AUTO POWER SHUT-OFF TIMER
file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/01-013.htm[24/03/2011 2:56:07 PM]
MX-2610N / MX-3110N / MX-3610N
AUTO POWER SHUT-OFF TIMER
Index
Contents
OPERATIONS COMMON TO ALL MODES
Auto Power Shut-Off Timer is also activated
by pressing the [Power Save] button while
the [Power Save] button is not lit.
This mode is cleared when print data is
being received or when the [Power Save]
button is pressed while it is blinking.
This mode turns off the power to the operation panel and the fusing unit, and makes the
machine wait in the lowest power consumption state.
Auto Power Shut-Off Timer will activate when the set duration of time elapses in waiting status
without executing a job.
Compared to preheat mode, the power-saving rate is considerably higher but the wakeup time
is longer.
The [Power Save] button blinks when the machine is in Auto Power Shut-Off Timer.
To set Auto Power Shut-Off Timer:
In "Setting mode", select [Energy Save] → [Auto Power Shut-Off].
In "Setting mode", select [Energy Save] → [Auto Power Shut-Off].
OPERATION GUIDE - AS SOON AS THE REMOTE JOB IS FINISHED, ENTER AUTO POWER SHUT OFF MODE
file:///G|/Documents/Products/MX2610_3110_3610N/Operation%20Manual/MX3610OP_0122A1/mx3610_ex_ope/contents/01-014.htm[24/03/2011 2:56:08 PM]
MX-2610N / MX-3110N / MX-3610N
AS SOON AS THE REMOTE JOB IS FINISHED, ENTER AUTO
POWER SHUT OFF MODE.
Index
Contents
OPERATIONS COMMON TO ALL MODES
Printing in Auto Power Shut-Off Timer turns on the power, and then the machine returns to
Auto Power Shut-Off Timer immediately after completing the print job.
To set "As soon as the remote job is finished, enter Auto power
shut off mode.":
In "Setting mode", select [Energy Save] → [Power Management Setting] → [As
soon as the remote job is finished, enter Auto power shut off mode.].
shut off mode.":
In "Setting mode", select [Energy Save] → [Power Management Setting] → [As
soon as the remote job is finished, enter Auto power shut off mode.].
Click on the first or last page to see other MX-2610N / MX-3110N / MX-3610N (serv.man18) service manuals if exist.