Sharp DX-C202 User Manual / Operation Manual ▷ View online
• For details about turning the machine on and off, see p.52 "Turning the Power on".
• For details about printing configuration page, see p.283 "Printing the Configuration Page".
• For details about [Admin. Tools Lock], see p.291 "Administrator Settings".
• For details about printing configuration page, see p.283 "Printing the Configuration Page".
• For details about [Admin. Tools Lock], see p.291 "Administrator Settings".
Configuring Telephone Network Settings
Selecting the telephone line type
Select the telephone line type according to your telephone line service. There are two types: tone and
pulse dial.
This function is not available in some regions.
pulse dial.
This function is not available in some regions.
1.
Press the [User Tools] key.
CES184
2.
Press the [ ] [ ] keys to select [Admin. Tools], and then press the [OK] key.
3.
If you are requested to enter a password, enter the password using the number keys,
and then press the [OK] key.
and then press the [OK] key.
4.
Press the [ ] [ ] keys to select [Dial/Push Phone], and then press the [OK] key.
5.
Press the [ ] [ ] keys to select the telephone line type appropriate for your telephone
service, and then press the [OK] key.
service, and then press the [OK] key.
6.
Press the [User Tools] key to return to the initial screen.
• You can press the [Escape] key to exit to the previous level of the menu tree.
• A password for accessing the [Admin. Tools] menu can be specified in [Admin. Tools Lock].
• A password for accessing the [Admin. Tools] menu can be specified in [Admin. Tools Lock].
• For details about [Admin. Tools Lock], see p.291 "Administrator Settings".
Configuring the Machine
75
Selecting the telephone network connection type
Select the type of connection to the telephone network.
There are two types: public switched telephone network (PSTN) and private branch exchange (PBX).
There are two types: public switched telephone network (PSTN) and private branch exchange (PBX).
1.
Press the [User Tools] key.
CES184
2.
Press the [ ] [ ] keys to select [Admin. Tools], and then press the [OK] key.
3.
If you are requested to enter a password, enter the password using the number keys,
and then press the [OK] key.
and then press the [OK] key.
4.
Press the [ ] [ ] keys to select [PSTN / PBX], and then press the [OK] key.
5.
Press the [ ] [ ] keys to select [PSTN] or [PBX], and then press the [OK] key.
6.
Press the [User Tools] key to return to the initial screen.
• You can press the [Escape] key to exit to the previous level of the menu tree.
• A password for accessing the [Admin. Tools] menu can be specified in [Admin. Tools Lock].
• A password for accessing the [Admin. Tools] menu can be specified in [Admin. Tools Lock].
• For details about [Admin. Tools Lock], see p.291 "Administrator Settings".
Setting the outside line access number
If the machine is connected to the telephone network through a PBX, set the dial number to access the
outside line.
outside line.
• Make sure to set the outside line access number that matches the setting of your PBX. Otherwise,
you may not be able to send faxes to outside destinations.
2. Getting Started
76
1.
Press the [User Tools] key.
CES184
2.
Press the [ ] [ ] keys to select [Admin. Tools], and then press the [OK] key.
3.
If you are requested to enter a password, enter the password using the number keys,
and then press the [OK] key.
and then press the [OK] key.
4.
Press the [ ] [ ] keys to select [PBX Access Number], and then press the [OK] key.
5.
Enter the outside line access number using the number keys, and then press the [OK] key.
6.
Press the [User Tools] key to return to the initial screen.
• You can press the [Escape] key to exit to the previous level of the menu tree.
• A password for accessing the [Admin. Tools] menu can be specified in [Admin. Tools Lock].
• A password for accessing the [Admin. Tools] menu can be specified in [Admin. Tools Lock].
• For details about [Admin. Tools Lock], see p.291 "Administrator Settings".
Configuring the Machine
77
Sharing the Printer on a Network
This section describes how to configure this machine as a Windows network printer.
The network printer is configured to enable network clients to use it.
The network printer is configured to enable network clients to use it.
• To change printer properties, you must have Manage Printers permission (Full Control access
authentication under Windows Vista/7). Log on to the file server as an Administrator to acquire this
permission.
permission.
• The following procedure is based on Windows XP as an example. If you are using another
operating system, the procedure might vary slightly.
1.
On the [Start] menu, click [Printers and Faxes].
2.
Click the icon of the printer you want to use.
3.
On the [File] menu, click [Properties].
4.
On the [Sharing] tab, click [Share this printer].
5.
To share the printer with users using a different version of Windows, click [Additional
Drivers...].
Drivers...].
Omit this step if you have installed an alternative driver by selecting [Share this printer] during the
printer driver installation.
printer driver installation.
6.
On the [Advanced] tab, click the [Printing Defaults...] button. Specify the default values
for the printer driver that will be distributed to client computers, and then click [OK].
for the printer driver that will be distributed to client computers, and then click [OK].
7.
Click [OK].
2. Getting Started
78
Click on the first or last page to see other DX-C202 service manuals if exist.