Sharp DX-C202 User Manual / Operation Manual ▷ View online
• You can press the [Escape] key to exit to the previous level of the menu tree.
• A password for accessing the [Network Settings] menu can be specified in [Admin. Tools Lock].
• If your network environment requires a specific transmission speed that is not automatically
• A password for accessing the [Network Settings] menu can be specified in [Admin. Tools Lock].
• If your network environment requires a specific transmission speed that is not automatically
detected, set the transmission speed in [Set Ethernet Speed] under [Network Settings].
• When [DHCP] is activated, manually configured IPv4 address settings are not used.
• For details about turning the machine on and off, see p.52 "Turning the Power on".
• For details about printing configuration page, see p.283 "Printing the Configuration Page".
• For details about [Admin. Tools Lock], see p.291 "Administrator Settings".
• For details about [Set Ethernet Speed], see p.279 "Network Settings".
• For details about printing configuration page, see p.283 "Printing the Configuration Page".
• For details about [Admin. Tools Lock], see p.291 "Administrator Settings".
• For details about [Set Ethernet Speed], see p.279 "Network Settings".
Assigning the machine's IPv4 address manually
• The IPv4 address assigned to the machine must not be used by any other device on the same
network.
1.
Press the [User Tools] key.
CES184
2.
Press the [ ] [ ] keys to select [Network Settings], and then press the [OK] key.
3.
If you are requested to enter a password, enter the password using the number keys,
and then press the [OK] key.
and then press the [OK] key.
4.
Press the [ ] [ ] keys to select [IPv4 Configuration], and then press the [OK] key.
5.
Press the [ ] [ ] keys to select [DHCP], and then press the [OK] key.
6.
Press the [ ] [ ] keys to select [Inactive], and then press the [OK] key.
7.
Press the [ ] [ ] keys to select [IP Address], and then press the [OK] key.
The current IPv4 address is shown.
Configuring the Machine
71
8.
Enter the machine’s IPv4 address using the number keys, and then press the [OK] key.
Press the [ ] [ ] keys to move between fields.
9.
Press the [ ] [ ] keys to select [Subnet Mask], and then press the [OK] key.
The current subnet mask is shown.
10.
Enter the subnet mask using the number keys, and then press the [OK] key.
Press the [ ] [ ] keys to move between fields.
11.
Press the [ ] [ ] keys to select [Gateway Address], and then press the [OK] key.
The current gateway address is shown.
12.
Enter the gateway address using the number keys, and then press the [OK] key.
Press the [ ] [ ] keys to move between fields.
13.
Press the [User Tools] key to return to the initial screen.
14.
If you are requested to restart the machine, turn off the machine, and then turn it back on.
15.
Print the configuration page to confirm the setting.
The IPv4 address setting will appear under “TCP/IP” on the configuration page.
• You can press the [Escape] key to exit to the previous level of the menu tree.
• A password for accessing the [Network Settings] menu can be specified in [Admin. Tools Lock].
• If your network environment requires a specific transmission speed that is not automatically
• A password for accessing the [Network Settings] menu can be specified in [Admin. Tools Lock].
• If your network environment requires a specific transmission speed that is not automatically
detected, set the transmission speed in [Set Ethernet Speed] under [Network Settings].
• When [DHCP] is activated, manually configured IPv4 address settings are not used.
• For details about turning the machine on and off, see p.52 "Turning the Power on".
• For details about printing configuration page, see p.283 "Printing the Configuration Page".
• For details about [Admin. Tools Lock], see p.291 "Administrator Settings".
• For details about [Set Ethernet Speed], see p.279 "Network Settings".
• For details about printing configuration page, see p.283 "Printing the Configuration Page".
• For details about [Admin. Tools Lock], see p.291 "Administrator Settings".
• For details about [Set Ethernet Speed], see p.279 "Network Settings".
Configuring the IPv6 Address Settings
The procedure for configuring network settings differs depending on whether IPv6 address information is
assigned automatically by the network (DHCP), or manually.
assigned automatically by the network (DHCP), or manually.
2. Getting Started
72
Setting the machine to receive an IPv6 address automatically
• A DHCP server is required on the network for the machine to receive an IPv6 address
automatically.
1.
Press the [User Tools] key.
CES184
2.
Press the [ ] [ ] keys to select [Network Settings], and then press the [OK] key.
3.
If you are requested to enter a password, enter the password using the number keys,
and then press the [OK] key.
and then press the [OK] key.
4.
Press the [ ] [ ] keys to select [IPv6 Configuration], and then press the [OK] key.
5.
Press the [ ] [ ] keys to select [DHCP], and then press the [OK] key.
6.
Press the [ ] [ ] keys to select [Active], and then press the [OK] key.
7.
Press the [User Tools] key to return to the initial screen.
8.
If you are requested to reboot the machine, turn off the machine, and then turn it back on.
9.
Print the configuration page to confirm the setting.
The IPv6 address setting will appear under “IPv6 Configuration” on the configuration page.
• You can press the [Escape] key to exit to the previous level of the menu tree.
• A password for accessing the [Network Settings] menu can be specified in [Admin. Tools Lock].
• When [DHCP] is activated, manually configured IPv6 address settings are not used.
• A password for accessing the [Network Settings] menu can be specified in [Admin. Tools Lock].
• When [DHCP] is activated, manually configured IPv6 address settings are not used.
• For details about turning the machine on and off, see p.52 "Turning the Power on".
• For details about printing configuration page, see p.283 "Printing the Configuration Page".
• For details about [Admin. Tools Lock], see p.291 "Administrator Settings".
• For details about printing configuration page, see p.283 "Printing the Configuration Page".
• For details about [Admin. Tools Lock], see p.291 "Administrator Settings".
Configuring the Machine
73
Assigning the machine's IPv6 address manually
• The IPv6 address assigned to the machine must not be used by any other device on the same
network.
1.
Press the [User Tools] key.
CES184
2.
Press the [ ] [ ] keys to select [Network Settings], and then press the [OK] key.
3.
If you are requested to enter a password, enter the password using the number keys,
and then press the [OK] key.
and then press the [OK] key.
4.
Press the [ ] [ ] keys to select [IPv6 Configuration], and then press the [OK] key.
5.
Press the [ ] [ ] keys to select [DHCP], and then press the [OK] key.
6.
Press the [ ] [ ] keys to select [Inactive], and then press the [OK] key.
7.
Press the [ ] [ ] keys to select [Manual Config. Address], and then press the [OK] key.
8.
Enter the machine’s IPv6 address using the number keys, and then press the [OK] key.
9.
Press the [ ] [ ] keys to select [Prefix Length], and then press the [OK] key.
10.
Enter the prefix length using the number keys, and then press the [OK] key.
11.
Press the [ ] [ ] keys to select [Gateway Address], and then press the [OK] key.
12.
Enter the gateway address using the number keys, and then press the [OK] key.
13.
Press the [User Tools] key to return to the initial screen.
14.
If you are requested to reboot the machine, turn off the machine, and then turn it back on.
15.
Print the configuration page to confirm the setting.
The IPv6 address setting will appear under “IPv6 Configuration” on the configuration page.
• You can press the [Escape] key to exit to the previous level of the menu tree.
• A password for accessing the [Network Settings] menu can be specified in [Admin. Tools Lock].
• When [DHCP] is activated, manually configured IPv6 address settings are not used.
• A password for accessing the [Network Settings] menu can be specified in [Admin. Tools Lock].
• When [DHCP] is activated, manually configured IPv6 address settings are not used.
2. Getting Started
74
Click on the first or last page to see other DX-C202 service manuals if exist.