Sharp DX-C202 User Manual / Operation Manual ▷ View online
Connecting to a Telephone Line
You can connect the machine to the public switched telephone network (PSTN) directly or through a
private branch exchange (PBX).
Also, you can connect an external telephone to use the same telephone line for voice calls.
private branch exchange (PBX).
Also, you can connect an external telephone to use the same telephone line for voice calls.
• To reduce the risk of fire, use only No. 26 AWG or larger telecommunication line cord.
• Pour réduire le risque d'incendie, utiliser uniquement des conducteurs de télécommunications 26
AWG ou de section supérieure.
•
: By law in the United States, you must program your phone number identification
(your fax number) into your machine before you can connect to the public phone system.
• Make sure the connector is the correct type before you start.
1.
Remove the cable cover.
CES068
Connecting the Machine
67
2.
Connect a telephone line cord to LINE.
CES041
3.
If using an external telephone, connect the telephone to TEL.
CES040
4.
Pass the telephone line cord through the opening in the cable cover.
CES045
2. Getting Started
68
5.
Hook the tabs of the cable cover into the openings of the machine.
CES046
6.
Attach the cable cover in place.
CES094
• After connecting the machine to the telephone line, configure the telephone network settings
and fax reception mode.
• If your telephone has functions that are not compatible with this machine, those functions will
not be usable.
• Confirm that you have registered user fax number and user name during Initial Setup. You can
check the registered information in [Program Fax Information] under [Admin. Tools].
• For details about registering fax sender information, see p.291 "Administrator Settings".
• For details about configuring the telephone network settings, see p.75 "Configuring
• For details about configuring the telephone network settings, see p.75 "Configuring
Telephone Network Settings".
• For details about configuring fax reception mode, see p.233 "Selecting Reception Mode".
• For details about [Program Fax Information], see p.291 "Administrator Settings".
• For details about [Program Fax Information], see p.291 "Administrator Settings".
Connecting the Machine
69
Configuring the Machine
This section describes configuring the settings required to use the machine on a network and as a fax
machine.
machine.
Configuring the IPv4 Address Settings
The procedure for configuring network settings differs depending on whether IPv4 address information is
assigned automatically by the network (DHCP), or manually.
assigned automatically by the network (DHCP), or manually.
Setting the machine to receive an IPv4 address automatically
• A DHCP server is required on the network for the machine to receive an IPv4 address
automatically.
1.
Press the [User Tools] key.
CES184
2.
Press the [ ] [ ] keys to select [Network Settings], and then press the [OK] key.
3.
If you are requested to enter a password, enter the password using the number keys,
and then press the [OK] key.
and then press the [OK] key.
4.
Press the [ ] [ ] keys to select [IPv4 Configuration], and then press the [OK] key.
5.
Press the [ ] [ ] keys to select [DHCP], and then press the [OK] key.
6.
Press the [ ] [ ] keys to select [Active], and then press the [OK] key.
7.
Press the [User Tools] key to return to the initial screen.
8.
If you are requested to restart the machine, turn off the machine, and then turn it back on.
9.
Print the configuration page to confirm the setting.
The IPv4 address setting will appear under “TCP/IP” on the configuration page.
2. Getting Started
70
Click on the first or last page to see other DX-C202 service manuals if exist.