DOWNLOAD Sharp DX-C202 Service Manual ↓ Size: 7.05 MB | Pages: 127 in PDF or view online for FREE

CES031

Shake each print cartridge from side to side five or six times.

CER101

19.

Check the toner color and corresponding location, and then carefully insert the print
cartridge vertically.

CES159

Installing the Machine

51

20.

Using both hands, hold the center of the top cover and close the cover carefully. Be
careful not to trap your fingers.

CES140

21.

Apply the indicated sticker as in the illustration below.

CES259

Turning the Power on

This section describes how to turn on the machine.

• Do not use any power sources other than those that match the specifications shown in this

manual. Doing so could result in fire or electric shock.

• Do not use any frequencies other than those that match the specifications shown. Doing so could

result in fire or electric shock.

• Do not use multi-socket adaptors. Doing so could result in fire or electric shock.

2. Getting Started

52

• Do not use extension cords. Doing so could result in fire or electric shock.

• Do not use power cords that are damaged, broken, or modified. Also, do not use power cords

that have been trapped under heavy objects, pulled hard, or bent severely. Doing so could
result in fire or electric shock.

• Touching the prongs of the power cable's plug with anything metallic constitutes a fire and

electric shock hazard.

• The supplied power cord is for use with this machine only. Do not use it with other appliances.

Doing so could result in fire or electric shock.

• It is dangerous to handle the power cord plug with wet hands. Doing so could result in electric

shock.

• Be sure to push the plug of the power cord fully into the wall outlet. Partially inserted plugs

create an unstable connection that can result in unsafe buildup of heat.

• If this machine is not going to be used for several days or longer at a time, disconnect its power

cord from the wall outlet.

• When performing maintenance on the machine, always disconnect the power cord from the

wall outlet.

• Make sure that the power cord is plugged securely into the wall outlet before turning the power on.
• Make sure that the power is off when plugging or unplugging the power cord.
• Do not turn off the power switch until initializing is completed. Doing so results in malfunction.

Installing the Machine

53

1.

Plug in the power cord.

CES066

2.

Insert the plug of the power cord into the wall socket securely.

3.

Turn the power switch to ” On”.

CES065

The Power indicator lights up, and then the [Copy] key on the control panel lights up.

• Depending on the [Function Priority] setting under [Admin. Tools], the [Facsimile] or [Scanner] key

may light up instead of the [Copy] key.

• The machine may make a noise while initializing. This noise does not indicate a malfunction.
• To turn off the power, turn the power switch to “  Off”.

CES063

2. Getting Started

54