Sharp DX-C202 User Manual / Operation Manual ▷ View online
Guide to Components
This section lists the names and functions of the parts of this machine.
Exterior: Front View
CES151
1. ADF (Auto document feeder) Cover
Open this cover to remove originals jammed in the ADF.
2. Input Tray for the ADF
Place stacks of originals here. They will feed in automatically. This tray can hold up to 35 sheets of plain
paper.
paper.
3. Output Tray for the ADF
Originals scanned with the ADF are output here.
4. Extender for the ADF Trays
Extend these when placing paper longer than A4 in the input tray for ADF.
5. Output Tray/Top Cover
Printed paper is output here. Up to 150 sheets of plain paper can be stacked here.
Open here to replace the print cartridges.
Open here to replace the print cartridges.
6. Front Cover
Open this cover to replace the waste toner bottle or remove jammed paper.
7. Tray 1
This tray can hold up to 250 sheets of plain paper.
Guide to Components
31
8. Tray 2 (option)
This tray can hold up to 500 sheets of plain paper.
9. Bypass Tray
Load paper here sheet by sheet.
10. Control Panel
Contains a screen and keys for machine control.
11. USB Flash Disk Port
Insert a USB flash disk for using the Scan to USB function or connect a digital camera using a USB cable for
PictBridge printing.
PictBridge printing.
12. Exposure Glass
Place originals here sheet by sheet.
13. Cover for the Exposure Glass
Open this cover to place originals on the exposure glass.
Exterior: Rear View
CES105
LINE
TEL
1. Button for Sliding the ADF
Press to slide the ADF towards the rear of the machine and hold it in that position, if paper output to the output
tray is difficult to retrieve.
tray is difficult to retrieve.
2. Power Switch
Use this switch to turn the power on or off.
3. Power Socket
For connecting the power cord to the machine.
4. Rear Cover
Remove this cover when loading paper longer than A4 in tray 1.
5. Cable Cover
Remove this cover when connecting cables to the machine.
1. Guide to the Machine
32
6. External Telephone Connector
For connecting an external telephone.
7. USB Port
For connecting the machine to a computer using a USB cable.
8. Ethernet Port
For connecting the machine to the network using a network interface cable.
9. G3 (analog) Line Interface Connector
For connecting a telephone line.
10. Stop Fences
Pull up this fence to prevent paper falling off when printing a large amount of paper at a time. The fence can
be adjusted at the A4/Letter or Legal size position
be adjusted at the A4/Letter or Legal size position
• Slide the ADF as shown below. Slide the ADF only when the ADF is closed. Be careful not to trap
your fingers when sliding.
CES099
• Pull up the fence as shown below to prevent A4- or Letter-size prints from falling off.
CES117
• Pull up the fence as shown below to prevent Legal-size prints from falling off.
Guide to Components
33
CES118
Interior
CES133
1. Print Cartridges
Load from the machine rear, in the order of cyan (C), magenta (M), yellow (Y), and black (K). Messages
appear on the screen when print cartridges need to be replaced, or new ones need to be prepared.
appear on the screen when print cartridges need to be replaced, or new ones need to be prepared.
2. Waste Toner Bottle
Collects excess toner during printing.
Messages appear on the screen when the waste toner bottle needs to be replaced, or a new one needs to be
prepared.
Messages appear on the screen when the waste toner bottle needs to be replaced, or a new one needs to be
prepared.
3. Transfer Unit
Remove this unit when replacing the waste toner bottle.
• For details about the messages that appear on the screen when consumables need to be replaced,
see p.379 "Error and Status Messages on the Screen".
1. Guide to the Machine
34
Click on the first or last page to see other DX-C202 service manuals if exist.