DOWNLOAD Sharp DX-C202 Service Manual ↓ Size: 7.05 MB | Pages: 127 in PDF or view online for FREE

1. Configure the machine's default [Reduce/Enlarge] setting.

To use this function for the current job only:

1. Configure the setting using the [Reduce/Enlarge] key before starting the current job.

Copying both sides of an ID card onto one side of paper

You can copy the front and back sides of an ID card, or other small document, onto one side of a sheet
of paper.

• This function is only available when the original is set on the exposure glass, not when it is set in the

ADF.

CES165

You can either set this machine to always make photocopies in ID card copy mode, or use this function
only when necessary.
Preparation for copying an ID card

To always make photocopies in ID card copy mode:

1. Configure the machine's default [Reduce/Enlarge] setting.

To use this function for the current job only:

1. Press the [ID Card Copy] key before starting the current job.

Making 2-sided copies

You can make 2-sided copies by copying single-sided documents onto the front and back sides of the
paper.

• This function is only available when the original is set in the ADF, not when it is set on the exposure

glass.

Feature Highlights

23

CES124

Change the machine's default setting to apply 2-sided copying.
Preparation for making 2-sided copies

1. Configure the [2 Sided Copy] setting under copy settings

Sorting the output paper

When making multiple copies of multiple pages, you can configure the machine to sort the output pages
into sets.

• This function is only available when the original is set in the ADF, not when it is set on the exposure

glass.

CES104

Preparation for sorting the output paper

1. Enable the [Sort] setting under copy settings.

Using the Machine as a Scanner

There are two scanning methods: scanning from the computer (TWAIN scanning) and scanning using
the control panel.
Scanning from the computer

TWAIN scanning allows you to operate the machine from your computer and scan originals into
your computer directly.
TWAIN scanning can be performed using a TWAIN-compliant application, such as Presto!
PageManager.

1. Guide to the Machine

24

TWAIN scanning is available with both USB and network connections.

Scanning using the control panel

Scanning using the control panel allows you to send scanned files via e-mail (Scan to E-mail), to an
FTP server (Scan to FTP), or to the shared folder of a computer on a network (Scan to Folder), or to
a USB flash disk (Scan to USB).
The Scan to E-mail, Scan to FTP, and Scan to Folder functions are available only through a network
connection. No network connection is required for the Scan to USB function; you can send
scanned files directly to a USB flash disk inserted into the front of the machine.

• The machine supports WIA scanning, an additional method of scanning originals from your

computer, for USB connection. WIA scanning is possible if your computer is running Windows
operating system and a WIA-compatible application. For more information, see the manual for
your application.

Scanning from a computer

You can operate the machine from your computer and scan originals into your computer directly.

CES185

Preparation for scanning from a computer with USB connection

1. Connect the machine to the computer using a USB cable, and install the scanner driver on the

computer.
For details, see p.63 "Connecting with a Computer Using a USB Cable" and the instructions
provided on the driver CD-ROM.

2. If a TWAIN-compliant application is not installed on the computer, install Presto!

PageManager.
For details, see the instructions provided on the driver CD-ROM.

Preparation for scanning from a computer with network connection

1. Connect the machine to the network.

Feature Highlights

25

2. Specify the network settings, such as the machine's IP address.

3. Install the scanner driver on the computer.

For details, see the instructions provided on the driver CD-ROM.

4. If a TWAIN-compliant application is not installed on the computer, install Presto!

PageManager.
For details, see the instructions provided on the driver CD-ROM.

Sending scanned files via e-mail

You can send scanned files via e-mail using the control panel.

CES186

Preparation for sending scanned files via e-mail

1. Connect the machine to the network.

For details, see p.65 "Connecting with a Network Cable".

2. Specify the network settings, such as the machine's IP address.

3. Configure the DNS and SMTP settings using Web Image Monitor.

For details, see p.327 "Configuring the DNS Settings" and p.331 "Configuring the SMTP
Settings".

4. Register the destinations to the Address Book using Web Image Monitor.

Sending scanned files to an FTP server

You can send scanned files to an FTP server using the control panel.

1. Guide to the Machine

26