DOWNLOAD Sharp DX-C202 Service Manual ↓ Size: 7.05 MB | Pages: 127 in PDF or view online for FREE

Control Panel

This section describes the names and usage of the parts of the control panel.

• The actual control panel may look different from the illustration below, depending on the country of

use.

• If the machine remains turned off for a certain period of time (for example, when the power switch

is turned off or when there is a power failure), all documents stored in memory will be lost. If the
Fax Received indicator is lit or flashing, make sure to print out the stored documents before turning
off the power (for example, prior to relocating the machine).

CES167

1. Fax Received indicator

Lights up when received faxes that have not been printed out exist in the machine's memory. Flashes when the
machine is unable to print out the faxes due to machine errors such as an empty paper tray or a paper jam.

2. [Pause/Redial] key

• Pause

Press to insert a pause in a fax number. The pause is indicated by “P”.

• Redial

Press to display the last used scan or fax destination.

3. [On Hook Dial] key

Press to use on-hook dialing to check the destination's status when sending a fax.

4. [Address Book] key

Press to select a scan or fax destination from the Address Book.

5. [Image Quality] key

Press to select scan quality for the current job.

• Copier mode: select Text, Photo, or Mixed.
• Scanner mode: select the resolution.

Guide to Components

35

• Fax mode: select Standard, Detail, or Photo.

6. [User Tools] key

Press to display the menu for configuring the machine's system settings.

7. [Copy] key

Press to switch to copier mode. The key stays lit while the machine is in copier mode.

8. [ID Card Copy] key

Press to enter ID card copy mode for the current job.

9. Screen

Displays current status and messages.

10. Scroll keys

Press to move the cursor in the directions indicated by each scroll key.
Pressing the [ ][ ] keys while the machine is in standby mode will display the menu for configuring the settings
of the machine's current operation mode (copier, scanner, or fax).

11. Number keys

Use to enter numerical values when specifying settings such as fax numbers and copy quantities, or enter
letters when specifying names.

12. [Clear/Stop] key

• While the machine is processing a job: press to cancel the current job.
• While configuring the machine: press to cancel the current setting and return to standby mode.
• While in standby mode: press to cancel temporary settings such as image density or resolution.

13. [B&W Start] key

Press to scan or copy in black and white, or start sending a fax.

14. [Color Start] key

Press to scan or copy in color.

15. [OK] key

Press to confirm settings or enter the next level of the menu tree.

16. [Escape] key

Press to cancel the last operation or exit to the previous level of the menu tree.

17. Selection keys

Press the key that corresponds to an item shown on the bottom line of the screen to select it.

18. [Facsimile] key

Press to switch to fax mode. The key stays lit while the machine is in fax mode.

19. [Scanner] key

Press to switch to scanner mode. The key stays lit while the machine is in scanner mode.

20. [Density] key

Press to adjust image density for the current job.

• Copier mode: select from 5 levels of density.

1. Guide to the Machine

36

• Scanner mode: select from 5 levels of density.
• Fax mode: select from 3 levels of density.

21. [Reduce/Enlarge] key

• Copier mode: press to specify the reduction or enlargement ratio for the current job.
• Scanner mode: press to specify the scanning size according to the current original.

22. [Shift] key

Press to switch between Quick Dial numbers 1 to 10 and 11 to 20 when specifying a scan or fax destination
using the One Touch buttons.

23. Alert indicator

Flashes yellow when the machine will require maintenance soon (such as replacing consumables), or lights up
red when a machine error occurs.
When an alert is issued, check the messages on the screen and follow the instructions as provided in "Error
and Status Messages on the Screen".

24. Power indicator

Remains lit while the power is on. It is unlit when the power is off.

25. One Touch buttons

Press to select a scan or fax Quick Dial destination.

• The backlight of the screen is turned off when the machine is in Energy Saver mode.
• When the machine is processing a job, you cannot display the menu for configuring the machine.

You can confirm the machine's status by checking messages on the screen. If you see messages
such as "Printing...", "B&W Copying...", "Colour Copying...", or "Processing...", wait until the current
job is finished.

• A sticker for control panel keys and a name sheet for One Touch buttons may be included,

depending on the country of use. If included, apply the stickers appropriate for your language to
the control panel. Note that if the control panel is covered with a protective sheet, be sure to
remove it before applying the stickers.

CES152

Guide to Components

37

• For details about what to do when the Alert indicator is flashing or lit, see p.379 "Error and Status

• For details about what to do when the Fax Received indicator is flashing or lit, see p.239 "Printing

1. Guide to the Machine

38