Sharp DX-C202 User Manual / Operation Manual ▷ View online
Model-Specific Information
This section explains how you can identify region of your machine.
There is a label on the rear of the machine, located in the position shown below. The label contains
details that identify the region your machine belongs to. Read the label.
There is a label on the rear of the machine, located in the position shown below. The label contains
details that identify the region your machine belongs to. Read the label.
CES130
The following information is region-specific. Read the information under the symbol that corresponds to
the region of your machine.
the region of your machine.
(mainly Europe and Asia)
If the label contains the following, your machine is a region A model:
• CODE XXXX -22, -27
• 220-240V
• 220-240V
(mainly North America)
If the label contains the following, your machine is a region B model:
• CODE XXXX -17
• 120 V
• 120 V
• Dimensions in this manual are given in two units of measure: metric and inch. If your machine is a
Region A model, refer to the metric units. If your machine is a Region B model, refer to the inch
units.
units.
Model-Specific Information
15
List of Option
This section provides a list of option for this machine, and how it is referred to as in this manual.
Option List
Referred to as
Paper Feed Unit
paper feed unit
• For details about the specifications of this option, see p.436 "Specifications of Options".
1. Guide to the Machine
16
How to Read This Manual
Symbols
This manual uses the following symbols:
Indicates points to pay attention to when using the machine, and explanations of likely causes of paper
misfeeds, damage to originals, or loss of data. Be sure to read these explanations.
misfeeds, damage to originals, or loss of data. Be sure to read these explanations.
Indicates supplementary explanations of the machine's functions, and instructions on resolving user
errors.
errors.
This symbol is located at the end of sections. It indicates where you can find further relevant information.
[ ]
Indicates the names of keys on the machine's display or control panels.
Notes
Contents of this manual are subject to change without prior notice.
Some illustrations in this manual might be slightly different from the machine.
Certain options might not be available in some countries. For details, please contact your local dealer.
Some illustrations in this manual might be slightly different from the machine.
Certain options might not be available in some countries. For details, please contact your local dealer.
About IP Address
In this manual, "IP address" covers both IPv4 and IPv6 environments. Read the instructions that are
relevant to the environment you are using.
relevant to the environment you are using.
How to Read This Manual
17
Using Manuals
Be sure to read this section before any other part of this manual.
• This manual uses procedures based on Windows XP as an example, unless otherwise specified.
Procedures and screens might vary depending on the operating system you are using.
Opening Manuals
This section describes how to open the manuals. There are three ways to view the manuals.
Follow the procedure below to open the manual from the CD-ROM.
Follow the procedure below to open the manual from the CD-ROM.
• The following procedure is based on Windows XP as an example. If you are using another
operating system, the procedure might vary slightly.
1.
Insert the manual CD-ROM into the CD-ROM drive.
If you are using a computer running a Macintosh operating system, open "Manuals.htm" from the
CD-ROM root directory.
CD-ROM root directory.
2.
Select a language for the interface and a product, and then click [OK].
3.
Click [Read PDF manuals], and then select the manual you want to read.
The manual opens.
• If you are using a computer running a Windows operating system, the CD-ROM opens
automatically. However, AutoRun may not work under certain operating system settings. If this is
the case, launch “setup.exe” from the CD-ROM root directory.
the case, launch “setup.exe” from the CD-ROM root directory.
1. Guide to the Machine
18
Click on the first or last page to see other DX-C202 service manuals if exist.