Sharp DX-C202 User Manual / Operation Manual ▷ View online
• Paper type and size can also be specified using the printer driver. For details, see the printer driver
Help.
• For prints from the bypass tray, you can select to print according to either the printer driver settings
or the control panel settings with [Bypass Tray Priority] under system settings.
• If [Auto Continue] under system settings is enabled, printing stops temporarily if a paper type/size
error is detected. The printing restarts automatically with the settings made with the control panel
after about ten seconds.
after about ten seconds.
• For details about [Bypass Tray Priority], see p.270 "System Settings".
• For details about [Auto Continue], see p.270 "System Settings".
• For details about [Auto Continue], see p.270 "System Settings".
Specifying the paper type
This section describes how to specify the paper type.
1.
Press the [User Tools] key.
CES184
2.
Press the [ ] [ ] keys to select [System Settings], and then press the [OK] key.
3.
Press the [ ] [ ] keys to select [Tray Paper Settings], and then press the [OK] key.
4.
Press the [ ] [ ] keys to select the paper type setting for the desired tray, and then press
the [OK] key.
the [OK] key.
5.
Press the [ ] [ ] keys to select the desired paper type, and then press the [OK] key.
6.
Press the [User Tools] key to return to the initial screen.
• You can press the [Escape] key to exit to the previous level of the menu tree.
Loading Paper
115
Specifying the standard paper size
This section describes how to specify the standard paper size.
1.
Press the [User Tools] key.
CES184
2.
Press the [ ] [ ] keys to select [System Settings], and then press the [OK] key.
3.
Press the [ ] [ ] keys to select [Tray Paper Settings], and then press the [OK] key.
4.
Press the [ ] [ ] keys to select the paper size setting for the desired tray, and then press
the [OK] key.
the [OK] key.
5.
Press the [ ] [ ] [ ] [ ] keys to select the desired paper size, and then press the [OK] key.
6.
Press the [User Tools] key to return to the initial screen.
• You can press the [Escape] key to exit to the previous level of the menu tree.
Specifying a custom paper size
This section describes how to specify a custom paper size.
• Custom size paper cannot be loaded in tray 2.
• When you perform printing, make sure that the paper size specified with the printer driver matches
• When you perform printing, make sure that the paper size specified with the printer driver matches
the paper size specified with the control panel. If a paper size mismatch occurs, a message
appears on the display. To ignore the error and print using mismatched paper, see "If a Paper
Mismatch Occurs".
appears on the display. To ignore the error and print using mismatched paper, see "If a Paper
Mismatch Occurs".
2. Getting Started
116
1.
Press the [User Tools] key.
CES184
2.
Press the [ ] [ ] keys to select [System Settings], and then press the [OK] key.
3.
Press the [ ] [ ] keys to select [Tray Paper Settings], and then press the [OK] key.
4.
Press the [ ] [ ] keys to select the paper size setting for the desired tray, and then press
the [OK] key.
the [OK] key.
5.
Press the [ ] [ ] [ ] [ ] keys to select [Custom Size], and then press the [OK] key.
6.
Press the [ ] [ ] keys to select [mm] or [inch], and then press the [OK] key.
7.
Enter the width using number keys, and then press the [OK] key.
To enter a decimal point, press [ ].
8.
Enter the length using number keys, and then press the [OK] key.
To enter a decimal point, press [ ].
9.
Press the [User Tools] key to return to the initial screen.
• You can press the [Escape] key to exit to the previous level of the menu tree.
• For details about printing using mismatched paper, see p.136 "If a Paper Mismatch Occurs".
Loading Paper
117
Placing Originals
This section describes the types of originals you can set and how to place them.
About Originals
This section describes the types of originals that can be placed and the parts of the original that are
unscannable.
unscannable.
Recommended size of originals
This section describes the recommended size of the original.
Exposure glass
Exposure glass
Up to 216 mm (8.5") in width, up to 297 mm (11.7") in length
ADF
• Paper size: 140 to 216 mm (5
1
/
2
" to 8
1
/
2
") in width, 140 to 356 mm (5
1
/
2
" to 14") in
length
• Paper weight: 64 to 90 g/m
2
(17 to 24 lb.)
• Only 1 sheet of an original can be placed on the exposure glass at a time.
• Up to 35 sheets of an original can be placed in the ADF at once (when using paper weighing 80
• Up to 35 sheets of an original can be placed in the ADF at once (when using paper weighing 80
g/m
2
, 20 lb.).
Types of originals not supported by the Auto Document Feeder
If placed in the ADF, the following types of original might be damaged or become jammed, or result in
gray or black lines appearing on prints:
gray or black lines appearing on prints:
• Originals larger or heavier than recommended
• Stapled or clipped originals
• Perforated or torn originals
• Curled, folded, or creased originals
• Pasted originals
• Originals with any kind of coating, such as thermal fax paper, art paper, aluminum foil, carbon
• Stapled or clipped originals
• Perforated or torn originals
• Curled, folded, or creased originals
• Pasted originals
• Originals with any kind of coating, such as thermal fax paper, art paper, aluminum foil, carbon
paper, or conductive paper
• Originals with perforated lines
• Originals with indexes, tags, or other projecting parts
• Originals with indexes, tags, or other projecting parts
2. Getting Started
118
Click on the first or last page to see other DX-C202 service manuals if exist.