Sharp DX-C202 User Manual / Operation Manual ▷ View online
1.
Pull out tray 1 carefully with both hands.
CES059
Place the tray on a flat surface.
2.
Take out paper from Tray 1.
3.
Push the metal plate down until it clicks into place to lock.
CER031
4.
Pinch the clip on the side paper guide, and then adjust the guides to the envelope.
CER032
5.
Pinch the clip on the front end paper guide to match the envelope size.
Loading Paper
111
6.
Set the envelopes in Tray 1 with the printing side facing up.
CER111
Make sure envelopes are not stacked higher than the upper limit (lower line) mark inside the tray.
CER050
7.
Carefully push Tray 1 straight into the machine.
CER051
To avoid paper jams, make sure the tray is securely inserted.
• Be sure to load envelopes so that their flaps are on the right. If you do not, the envelopes will
become creased.
• If printed envelopes come out badly creased, load the envelopes in the opposite direction, and
then rotate the print object by 180 degrees using the printer driver before printing. For details, see
the printer driver Help.
the printer driver Help.
2. Getting Started
112
• For details about paper types supported by the machine, see p.82 "Paper and Other Media".
• For details about the paper settings, see p.114 "Specifying Paper Type and Paper Size".
• For details about the paper settings, see p.114 "Specifying Paper Type and Paper Size".
Loading envelopes in the bypass tray
• Avoid using self-adhesive envelopes. They may cause machine malfunctions.
• Check there is no air in the envelopes before loading.
• Load only one size and type of envelope at a time.
• Before loading envelopes, flatten their leading edges (the edge going into the machine) by running
• Check there is no air in the envelopes before loading.
• Load only one size and type of envelope at a time.
• Before loading envelopes, flatten their leading edges (the edge going into the machine) by running
a pencil or ruler across them.
• Some kinds of envelope might cause misfeeds, wrinkles or print poorly.
• Print quality on envelopes may be uneven if parts of an envelope have different thicknesses. Print
• Print quality on envelopes may be uneven if parts of an envelope have different thicknesses. Print
one or two envelopes to check print quality.
• In a hot and humid environment, the envelope might be output creased or improper printing
quality.
1.
Insert the edge of the envelope into the machine.
CES202
Loading Paper
113
2.
Adjust the paper guides to the envelope size.
CES203
3.
Support the envelope with both hands, and insert it carefully until it stops.
CES204
After the envelope is inserted until it stops, the envelope will be automatically fed into the machine
a little.
a little.
• Be sure to load envelopes so that their flaps are on the right. If you do not, the envelopes will
become creased.
• If printed envelopes come out badly creased, load the envelopes in the opposite direction, and
then rotate the print object by 180 degrees using the printer driver before printing. For details, see
the printer driver Help.
the printer driver Help.
• For details about paper types supported by the machine, see p.82 "Paper and Other Media".
• For details about the paper settings, see p.114 "Specifying Paper Type and Paper Size".
• For details about the paper settings, see p.114 "Specifying Paper Type and Paper Size".
Specifying Paper Type and Paper Size
This section describes how to specify the paper size and paper type using the control panel.
2. Getting Started
114
Click on the first or last page to see other DX-C202 service manuals if exist.