DOWNLOAD Sharp AR-PB2A (serv.man9) Service Manual ↓ Size: 491.88 KB | Pages: 78 in PDF or view online for FREE

Is the print face down?

Solution: Face down or face up can be selected.

Is reverse order selected in the printer driver?

Solution: Set reverse order with face up delivery.

Too much paper in the output tray?

Solution: Remove the paper from the output tray.

Has the paper run out?

Solution: Load paper.

Is paper selection of driver “Auto”?

Solution: Ensure that the desired paper is set in a paper tray of the printer and select “Auto” in the

paper selection of the printer driver.

Is face down selected?

Solution: Select face up for stapling. (except AR-505 and AR-507)

Different sized papers used?

Solution: Stapling cannot be performed on different sized papers.

Is the paper size acceptable for stapling?

Solution:  Check the acceptable paper sizes for stapling referring to the copier operation manual.

Is the desired location acceptable?

Solution: Stapling positions are limited. Check the locations.

Did a paper misfeed occur, or did the paper in the selected tray run out?

Solution: Clear the error referring to the copier operation manual.

2-sided printing for covers using heavy paper?

Solution: Use appropriate paper. See the copier operation manual for paper specifications.

Is the timeout time short?

Solution: Set a longer time in the timeout settings under the Details tab. (Windows)

Even if a longer time is set, printer write error may occur when copying is being performed.

Is the selected paper size proper for the specified output tray?

Solution: Check the acceptable paper sizes to the specified output tray referring to the copier

operation manual.

Check: 

Does the “CHECK THE SUB MACHINE.” message appear on the touch panel of the sub
printer?

Solution:  Follow the message on the sub printer to solve the problem.

Problem:  Tandem printing cannot be performed.
Check: 

Does the “THE SYSTEM IS NOT CONFIGURED TO PERFORM TANDEM JOB.”
message appear on the touch panel?

Solution:  Tandem printing is not performed unless the same options are installed to both the main

and sub printers.

If there is insufficient toner in the printer, the ‘Add Toner’ message will normally be displayed.
If you cannot resolve a printing problem using the information in this chapter, contact your authorized Sharp service
center.

Model

AR-PB2A

Printing speed (up to)

Same as copying speed

Resolution

600 dpi

Operating conditions

Temperature: 15°C to 30°C (59°F to 86°F)

Humidity: 20% to 85%

Printer option board power source

Supplied from copier

Output color

Black

Memory

16MB RAM standard

Optional memory

Max. 2 pieces of 32 MB RAM

Page description languages

PCL5e emulation; PCL6 emulation; PostScript®
Level 2 emulation

Resident font

Outline font: 80
Stroke font:  1

Platform

IBM PC/AT (Windows); Macintosh

General network card slot

Available (In some countries and regions, network
interface card is not available.)

Interface

IEEE 1284-compatible (parallel port), optional
network interface card (Print Server Card)

Plug and Play

Available under Windows 95 and Windows 98

Specifications are subject to change without notice. Changes to the specifications will normally
reflect improvements or upgrades to AR-PB2A features and performance.

Consult your authorized Sharp dealer for information on an optional memory card and network interface card.

X

Y

Printable area

2.7mm (7/64")

2.7mm (7/64")

2.7mm (7/64")

2.7mm (7/64")

Paper size

X

Y

A3

6912

9824

B4

5952

8480

A4

6912

4864

B5

5952

4192

A5

4864

3392

A6

2368

3392

Ledger

6464

10080

Letter

6464

4992

Legal

4992

8288

Invoice

4992

3168

Executive

4224

6176

Foolscap

4992

7680

Japanese

Postcard

2240

3392

(dots in 600 dpi)