Sharp AR-PB2A (serv.man26) Service Manual / Technical Bulletin ▷ View online
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 047.doc
Page: 13 of 14
You must click the Save button again on this screen to make the change permanent. If other paper
formats are to be changed, return to the previous screen and specify another format for this device
name. Repeat the edit and double save process for each format and then return to the initial SPAD
screen.
formats are to be changed, return to the previous screen and specify another format for this device
name. Repeat the edit and double save process for each format and then return to the initial SPAD
screen.
The new device type with the special options is now ready to be assigned to a printer. This printer
can be an existing SAP definition or a new one for these finishing options. The SAP printer names
must be different but can point to the same operating system printer. Therefore, the same network
printer can be used with many different options depending on the SAP printer name selected for the
spool output.
can be an existing SAP definition or a new one for these finishing options. The SAP printer names
must be different but can point to the same operating system printer. Therefore, the same network
printer can be used with many different options depending on the SAP printer name selected for the
spool output.
Assigning a device type to a printer is a normal function performed by an SAP administrator but will
be reiterated here. Select “Output devices” from the SPAD screen and click Change.
be reiterated here. Select “Output devices” from the SPAD screen and click Change.
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 047.doc
Page: 14 of 14
Specify the new device type name, spool output server name, etc. and Save the result.
The new/revised printer definition is now ready to test. Run appropriate reports and direct the output
to the special printer id associated with this ZSHARP device type (and format) to verify the results are
as expected.
The new/revised printer definition is now ready to test. Run appropriate reports and direct the output
to the special printer id associated with this ZSHARP device type (and format) to verify the results are
as expected.
Note that the device type is brought into local memory by SAP the first time it is used. Therefore,
changes to an existing device type definition may not become effective until the SAP instance (or at
least the spool process) has been restarted, depending on the SAP release/patch level installed.
changes to an existing device type definition may not become effective until the SAP instance (or at
least the spool process) has been restarted, depending on the SAP release/patch level installed.
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 047.doc
Page: 14 of 14
Specify the new device type name, spool output server name, etc. and Save the result.
The new/revised printer definition is now ready to test. Run appropriate reports and direct the output
to the special printer id associated with this ZSHARP device type (and format) to verify the results are
as expected.
The new/revised printer definition is now ready to test. Run appropriate reports and direct the output
to the special printer id associated with this ZSHARP device type (and format) to verify the results are
as expected.
Note that the device type is brought into local memory by SAP the first time it is used. Therefore,
changes to an existing device type definition may not become effective until the SAP instance (or at
least the spool process) has been restarted, depending on the SAP release/patch level installed.
changes to an existing device type definition may not become effective until the SAP instance (or at
least the spool process) has been restarted, depending on the SAP release/patch level installed.
Sharp Electronics (UK) Ltd., NIS Systems Support
NIS Bulletin 047.doc
Page: 14 of 14
Specify the new device type name, spool output server name, etc. and Save the result.
The new/revised printer definition is now ready to test. Run appropriate reports and direct the output
to the special printer id associated with this ZSHARP device type (and format) to verify the results are
as expected.
The new/revised printer definition is now ready to test. Run appropriate reports and direct the output
to the special printer id associated with this ZSHARP device type (and format) to verify the results are
as expected.
Note that the device type is brought into local memory by SAP the first time it is used. Therefore,
changes to an existing device type definition may not become effective until the SAP instance (or at
least the spool process) has been restarted, depending on the SAP release/patch level installed.
changes to an existing device type definition may not become effective until the SAP instance (or at
least the spool process) has been restarted, depending on the SAP release/patch level installed.
