DOWNLOAD Sharp AR-M550 (serv.man23) Service Manual ↓ Size: 7.48 MB | Pages: 56 in PDF or view online for FREE

: Jan. 9 2004

AR-M550/M620  INSTALLATION MANUAL  (AR-FR11)  7 - 1

• To enable the data security function, the product key must be

acquired.

• If unfinished data remains in the memory of the main unit (including

HDD), output or transmit all the data to clear the data remaining in
the main unit and then start installation.

1) Turn the power switch located on the right side of the main unit to

the "OFF" position.

2) Open the front cabinet and turn the main power switch to the

"OFF" position.

3) Remove the power plug of the main unit from the outlet.

1) Remove the two screws that secure the upper right cabinet and

remove the upper right cabinet.

∗

If cables are connected to the control PWB, remove all cables.

2) Remove the four screws that secure the control PWB unit.

3) Raise the two grips and hold them to pull out the control PWB unit

until the stopper is engaged.

4) Remove the two flat cable connectors.

5) While using your finger to release the stopper, pull the control PWB

unit out of the main unit.

Remove the ROMs (MAIN and BOOT ROMs) from the control PWB
and replace them with the two ROMs (MAIN and BOOT ROMs) of the
data security kit.

The MAIN and BOOT ROMs are indicated with "MAIN" and "BOOT" on
the labels on the ROMs respectively.

When mounting the data security kit ROMs, insert them to the same
positions in the same orientations as those before replacement until
they click and ensure that the inserted ROMs are locked with the sock-
ets.

MAIN ROM: 1 pc.

BOOT ROM: 1 pc.

Screws

Upper right cabinet

MAIN ROM

Notches

BOOT ROM

: Jan. 9 2004

AR-M550/M620  INSTALLATION MANUAL  (AR-FR11)  7 - 2

1) Reattach the control PWB unit to the main unit.

2) Reconnect the two flat cable connectors that have been removed

in step (2).

3) Secure the unit with the four screws.

4) Return the grips to their original positions.

5) Pull out the grip of the main unit, pass it through the hole shown in

the illustration, then reattach the upper right cabinet that has been
removed in step (2) to the main unit, and secure it with the two
screws.

∗

Reconnect all the cables that have been removed in step (2)-1) to
the control PWB.

If another peripheral device must be installed, carry out the following
steps at the end of the installation work.

1) Insert the power plug of the main unit to the outlet.

2) Turn on the main power switch and then close the front cabinet.

3) Turn the main switch located on the right side of the main unit to

the "ON" position.

To enable the data security function, use the keys on the operation
panel to enter the product key.

For entry of the product key, see the section of key operator programs
of the operation manual for the main unit.

After completing product key entry, turn off the power switch and the
main power switch of the main unit and then turn on the power switch
and the main power switch again.

You can make operation settings of the data security function using a
key operator program.

If some files have been stored using the quick file function before
installation of AR-FR11, be sure to execute [CLEAR ALL MEMORY]
after installation to delete all the stored files.

Grip

Screws

Upper right cabinet

: Jan. 9 2004

AR-M550/M620  INSTALLATION MANUAL  (AR-PK5)  8 - 1

• To enable the PS expansion function, the product key must be

acquired.

• For models on which the printer and network functions cannot be

used, a printer expansion ROM and a Print Server Card must be
installed in advance.

• CD-ROM: 1 pc.

• Product key sheet: 1 sheet

To enable the PS expansion function, use the keys on the operation
panel to enter the product key.

For entry of the product key, see the online manual included in the sup-
plied CD-ROM or the section of key operator programs of the operation
manual for the main unit.

After completing product key entry, turn off the power switch and the
main power switch of the main unit and then turn on the power switch
and the main power switch of the main unit again.

1) Use the keys on the operation panel to execute test page printing

and print the PS FONT LIST as a test print. 

2) Installation of the driver software to the computer server and its

setting must be performed by the customer or based on discussion
with the customer.

For installation of the driver software, see the installation guide.

3) Finally, execute printing from the computer server and check that

printing is performed normally.

: Jan. 9 2004

AR-M550/M620  INSTALLATION MANUAL  (AR-NS3)  9 - 1

• To enable the scanner function, the product key must be acquired.

• For models on which the printer and network functions cannot be

used, a printer expansion ROM and a Print Server Card must be
installed in advance.

• CD-ROM: 1 pc.

• Product key sheet: 1 sheet

• Installation guide: 1 sheet

To enable the scanner function, use the keys on the operation panel to
enter the product key.

For entry of the product key, see the section of key operator programs
of the operation manual for the main unit.

After completing product key entry, turn off the power switch and the
main power switch of the main unit and then turn on the power switch
and the main power switch of the main unit again.

1) Installation of the driver software to the computer server and its

setting must be performed by the customer or based on discussion
with the customer.

2) Finally, referring to the installation guide, set the destination profile.

Send image data and check that the image is properly received.