DOWNLOAD Sharp AR-M165-207 (serv.man17) Service Manual ↓ Size: 13.1 MB | Pages: 127 in PDF or view online for FREE

AR-M207 M165 M162 SIMULATIONS 7-14

22

01

Though SIM26-74 is set to “1: Scan counter is added,” the count is not added to SIM22-01 total counter 
display. The setting affects only the total counter display in the key operator program. 

03

Used to check the jam kind occurred in the main unit and the SPF.
The kinds of jams up to 30 items are displayed sequentially from the latest one. (The oldest one is deleted 
sequentially.) This display is used for troubleshooting. (If there are extremely many troubles in a position, it 
may be judged that a repair must be executed.)
The kinds and contents of jams to be displayed are as follows.

[CA] key: Exits the simulation mode.
[Interruption] key: Shifts to the sub code input window.

,   keys: Switches to another page.

Main 
code

Sub 

code

Contents

Remark

Sim22-1 COUNTER 1/4

TOTAL

:nnnnnnn

MAINTE

:nnnnnnn

DEV

:nnnnnnn(*)

MIN_MNT :nnnnnnn(*)
DRUM

:nnnnnnn

Sim22-1 COUNTER 2/4

CPY JOB

: nnnnnnn

PRT JOB

: nnnnnnn

SCN JOB : nnnnnnn
OC SCN

: nnnnnnn

Sim22-1 COUNTER 3/4

SPF

: nnnnnnn

DUPLEX

: nnnnnnn

OTHERS

: nnnnnnn

MNTCYC : nnnnnnn

Sim22-1 COUNTER 4/4

DRM TTL : nnnnnnn
MMTCYC : nnnnnnn

(*) Either of the following two is displayed depending on the model.
DEV: Development counter (EX Japan)
MIN_MNT: Mini maintenance counter (Japan)

Counter display
TOTAL

: Total counter

MAINTE

: Maintenance counter (AR model)

DEV

: Development counter (AR EX Japan model)

MIN MNT : Mini maintenance counter (AR Japan model)
DRUM

: Drum counter

CPY JOB : Copy job counter
PRT JOB : Print job counter
SCN JOB : Scan job counter
OC SCN : OC scan counter
SPF

: SPF counter

DUPLEX : DUPLEX counter
OTHERS : Other counter
MNTCYC : Maintenance cycle (AR model)
DRM TTL  :Drum rotation accumulated time 
MMTCYC : Mini maintenance cycle (AR Japan model)

Sim22-3 JAM HIS. 1/4

XXXXXXX   XXXXXXX
XXXXXXX   XXXXXXX
XXXXXXX   XXXXXXX
XXXXXXX   XXXXXXX

Sim22-3 JAM HIS. 2/4

XXXXXXX   XXXXXXX
XXXXXXX   XXXXXXX
XXXXXXX   XXXXXXX
XXXXXXX   XXXXXXX

Kinds of jams and display contents
SPPD_ON

: SPF paper entry sensor (Not reached)

SPPD_OFF : SPF paper entry sensor (Remaining)
SOUT_ON

: SPF paper exit sensor (Not reached)

SOUT_OFF : SPF paper exit sensor (Remaining)
POUT_ON

: Paper exit sensor (Not reached)

POUT_OFF : Paper exit sensor (Remaining)
DPX_ON

: DUP sensor (Not reached)

DPX_OFF

: DUP sensor (Remaining)

PIN_ON

: Paper feed sensor (Not reached)

PIN_OFF

: Paper feed sensor (Remaining)

PIN2_ON

: Cassette 2 paper feed sensor (Not reached)

PIN3_ON

: Cassette 3 paper feed sensor (Not reached)

PIN4_ON

: Cassette 4 paper feed sensor (Not reached)

[07]SIMULATIONS.fm  14 ページ  ２００４年１１月１７日　水曜日　午後１２時１１分

AR-M207 M165 M162 SIMULATIONS 7-15

22

04

Used to display the jam total counter.

07

Used to display the key operator code.

09

Used to display the paper feed quantity of each paper feed tray. This simulation shows the use frequency of 
each paper feed section.

[CA] key: Exits the simulation mode.
[Interruption] key: Shifts to the sub code input window.
   ,   keys: Switches to another page.

* TRAY2-TRAY4 are displayed only when they are installed.

13

Used to display the CRUM chip destination code saved in the EEPROM. If the display does not match the 
destination code saved in the CRUM chip, it is judged as an error.
* This simulation is valid only for the model with the CRUM chip.

14

The version of the option board which is not installed is not displayed. 

Main 
code

Sub 

code

Contents

Remark

Sim22-4 COUNTER

JAM        :        nnnnnn

Sim22-7  KEY OPE

KEY CODE:

nnnnn

Sim22-9 COUNTER 1/2

BYPASS

: nnnnnnn

TRAY1

: nnnnnnn

TRAY2

: nnnnnnn

TRAY3

: nnnnnnn

Sim22-9 COUNTER 2/2

TRAY4

: nnnnnnn

Key

Key

Sim22-13  CRUM

CRUM TYPE    nn

Number : Setting (Destination)
00

: Not set.

01

: BTA-A

02

: BTA-B

03

: BTA-C

04

: BTA-E

12

: AL series

99

: Conversion

Sim22-14 ROM VER1/2

S/N

: -----------

MCU

: --.--

IMC

: --.--

PNL

: --.--

Sim22-14 ROM VER2/2

FAX

: --.--

S/N

:Production serial number

MCU

:Main unit program version

IMC

:IMC program version 

PNL

:Panel program version

FAX

:FAX program version 

[07]SIMULATIONS.fm  15 ページ  ２００４年１１月１７日　水曜日　午後１２時１１分

AR-M207 M165 M162 SIMULATIONS 7-16

22

15

The latest 20 troubles are displayed. (The oldest one is overwritten sequentially.)

[CA] key: Exits the simulation mode.
[Interruption] key: Shifts to the sub code input window.
   ,   keys: Switches to another page.

The display sequence is as shown below.

In this case, (1) is the latest one and (12) is the oldest.

22

Used to display the SPF JAM counter.
When [Interruption] key is pressed, the machine goes to the sub code input window. When [CA] key is 
pressed, the machine exits the simulation mode.

24

01

When this simulation is executed, the clear confirmation window is displayed as shown below.
When [OK] key or [START] key is pressed, the jam total count and the jam memory are cleared and the 
machine shifts to the sub code input window.

02

Used to clear the trouble memory and the trouble history data in the EEPROM.
When [Interruption] key is pressed, the machine shifts to the sub code input window. When [CA] key is 
pressed, the machine exits the simulation mode.

04

Used to clear the SPF paper feed counter.

[CA] key: Exits the simulation mode.
[Interruption] key: Shifts to the sub code input window. 

Main 
code

Sub 

code

Contents

Remark

Sim22-15 TROUBLE 1/2

Sim22-15 TROUBLE 2/2

XX-XX  XX-XX  XX-XX
XX-XX  XX-XX  XX-XX
XX-XX  XX-XX  XX-XX
XX-XX  XX-XX  XX-XX

XX-XX  XX-XX  XX-XX
XX-XX  XX-XX  XX-XX
XX-XX  XX-XX

Key

Key

Sim22-15 TROUBLE 1/2

1
2
3
4

5
6
7
8

9

10

11

12

Sim22-22 JAM CNT 

SPF

: nnnnnnn

Sim24-1 COUNTER CLR

AER YOU SURE? EXEC

JAM COUNTER CLEAR

Sim24-2 COUNTER CLR

AER YOU SURE? EXEC

TROUBLE COUNTER 
CLEAR

Sim24-4 COUNTER CLR

AER YOU SURE? EXEC

SPF COUNTER 
CLEAR

[07]SIMULATIONS.fm  16 ページ  ２００４年１１月１７日　水曜日　午後１２時１１分

AR-M207 M165 M162 SIMULATIONS 7-17

24

05

Used to clear the duplex print counter.

[CA] key: Exits the simulation mode.
[Interruption] key: Shifts to the sub code input window. 

06

Used to clear the paper feed counter data in each paper feed section.

* TRAY2-TRAY4 are displayed only when they are installed.

[CA] key: Exits the simulation mode.
[Interruption] key: Shifts to the sub code input window. 

07

Used to clear the drum counter and the drum rotating time.

[CA] key: Exits the simulation mode.
[Interruption] key: Shifts to the sub code input window. 

08

Used to clear the copy counter.

[OK] or [START] key: Clears the copy counter and shifts to the sub code input window.
[CA] key: Exits the simulation mode.
[Interruption] key: Shifts to the sub code input window.

09

Used to clear the printer counter and other counters.
Select a counter to be cleared and press [OK] key or [START] key. The confirmation window is displayed. 
Press [OK] key or [START] key again, and the specified counter is cleared and the machine returns to the 
initial window.

[CA] key: Exits the simulation mode.
[Interruption] key: Shifts to the sub code input window. 

Main 
code

Sub 

code

Contents

Remark

Sim24-5 COUNTER CLR

AER YOU SURE? EXEC

DUPLEX COUNTER 
CLEAR

Sim24-6 COUNTER CLR

Sim24-6 COUNTER CLR

Sim24-6 COUNTER CLR

10 Key

1:BYPASS
2:TRAY1
3:TRAY2

4:TRAY3
5:TRAY4

0

1:BYPASS
2:TRAY1
3:TRAY2

4:TRAY3
5:TRAY4

2

1:BYPASS
2:TRAY1
3:TRAY2
ARE YOU SURE?

4:TRAY3
5:TRAY4

2

C Key

OK/START

OK/START

Return

(Initial window

(Counter selection window)

(Confirmation window)

Sim24-7 COUNTER CLR

AER YOU SURE? EXEC

DRUM COUNTER 
CLEAR

Sim24-8 COUNTER CLR

AER YOU SURE? EXEC

COPIES COUNTER 
CLEAR

Sim24-9 COUNTER CLR

Sim24-9 COUNTER CLR

1:PRINT
2:OTHER

OK/START

OK/START(Counter clear)

Return

10-key input

1

1:PRINT

2:OTHER

1

ARE YOU SURE?

[07]SIMULATIONS.fm  17 ページ  ２００４年１１月１７日　水曜日　午後１２時１１分