Sharp AR-C200P (serv.man6) User Manual / Operation Manual ▷ View online
TROUBLESHOOTING > 110
IN THE FUSER UNIT
If there is any paper jammed in the fuser unit, carry out the following:
(a)
Move the two coloured locking levers (1) either side of
the fuser unit toward the rear of the machine (they are
spring loaded toward the front).
the fuser unit toward the rear of the machine (they are
spring loaded toward the front).
(b)
Remove the fuser unit, holding the unit by the handle,
and place it on a flat table.
and place it on a flat table.
WARNING!
The fuser unit is very hot after printing. Always use the handle when
lifting it.
lifting it.
(1)
(1)
TROUBLESHOOTING > 111
(c)
With the coloured lever on the fuser unit to your right,
move it toward you. Slowly remove any jammed paper.
move it toward you. Slowly remove any jammed paper.
(d)
Replace the fuser unit into the printer.
TROUBLESHOOTING > 112
IN THE DUPLEX UNIT
If there is any paper jammed in the Duplex unit, carry out the
following:
following:
(a)
Open the front cover and slide out the duplex unit.
TROUBLESHOOTING > 113
(b)
Open the duplex top cover and remove any jammed
paper.
paper.
(c)
Close the duplex top cover and slide the duplex unit
back into the printer.
back into the printer.
(d)
Close the front cover.
Click on the first or last page to see other AR-C200P (serv.man6) service manuals if exist.