Sharp AR-C200P (serv.man6) User Manual / Operation Manual ▷ View online
MAINTENANCE > 137
5.
Remove the protective sheet from the new image drum.
MAINTENANCE > 138
6.
Install the new image drum into its correct colour location in
the printer.
the printer.
(1)
MAINTENANCE > 139
7.
Push the tab inwards and remove the blanking plate from the
image drum.
image drum.
8.
Re-install the toner cartridge or replace it with a new toner
cartridge of the corresponding colour. See “Changing toner
cartridge” above.
cartridge of the corresponding colour. See “Changing toner
cartridge” above.
9.
Close the top cover.
MAINTENANCE > 140
CHANGING THE TRANSFER BELT
When the transfer belt reaches the end of its product life, CHANGE
BELT UNIT is displayed in the control panel. Transfer belt life is
approximately 60000 sheets, A4, long edge feed. However, this
assumes a standard print job of three sheets. If single sheets are
printed, transfer belt life is reduced.
BELT UNIT is displayed in the control panel. Transfer belt life is
approximately 60000 sheets, A4, long edge feed. However, this
assumes a standard print job of three sheets. If single sheets are
printed, transfer belt life is reduced.
1.
Switch off the printer and open the top cover.
2.
Remove the cradle complete with the four image drums and
toner cartridges from the printer.
toner cartridges from the printer.
Click on the first or last page to see other AR-C200P (serv.man6) service manuals if exist.