Sharp AR-C200P (serv.man6) User Manual / Operation Manual ▷ View online
MAINTENANCE > 145
2.
Move the two locking levers (1) to the rear of the machine to
release the fuser unit.
release the fuser unit.
3.
Using the handle (2), remove the fuser unit from the printer.
4.
Remove the new fuser unit from its packaging.
5.
Using the handle (2), install the new fuser unit into the printer.
6.
Make sure the two spring loaded locking levers (1) lock the
fuser unit into place.
fuser unit into place.
7.
Remove the retaining tape from the coloured, spring loaded
lever (3) on top of the fuser unit.
lever (3) on top of the fuser unit.
8.
Close the top cover.
WARNING!
The fuser unit is very hot after printing. Always use the handle when
lifting it.
lifting it.
MAINTENANCE > 146
CLEANING THE LED HEAD
Clean the LED head when printing does not come out clearly, has
white lines or when text is blurred.
white lines or when text is blurred.
1.
Switch off the printer and open the top cover.
CAUTION!
Do not use methyl alcohol or other solvents on the LED head otherwise
damage to the lens surface will occur.
damage to the lens surface will occur.
MAINTENANCE > 147
2.
Gently
wipe the LED head surface with LED lens cleaner or soft
tissue.
3.
Close the top cover.
MAINTENANCE > 148
TRANSPORTING THE PRINTER
This printer is a precision machine. If it is transported without its
protective packaging it may be prone to mechanical damage.
protective packaging it may be prone to mechanical damage.
1.
Turn off the printer.
2.
Disconnect the power cable and printer interface cable from
the printer and remove any paper from the paper trays.
the printer and remove any paper from the paper trays.
3.
Open the top cover and remove the four image drums.
Click on the first or last page to see other AR-C200P (serv.man6) service manuals if exist.