Sharp AR-C200P (serv.man6) User Manual / Operation Manual ▷ View online
TROUBLESHOOTING > 114
IN ANY ADDITIONAL PAPER TRAYS
If any additional paper tray(s) are installed, remove the paper trays
and check that no paper is jammed along the various parts of the exit
path.
and check that no paper is jammed along the various parts of the exit
path.
Finally...
When all paper jams have been cleared, close the top cover.
TROUBLESHOOTING > 115
PARALLEL TRANSMISSION MODE
If there are problems communicating with the computer, i.e. the
printout is garbled or incorrect, the transmission mode of the parallel
interface can be changed.
printout is garbled or incorrect, the transmission mode of the parallel
interface can be changed.
1.
Press the
Menu button until PARALLEL MENU is displayed, then
press the Select button.
2.
Press the
Item button until the required setting is displayed.
3.
Press the
Value button to display ENABLE or DISABLE as
required.
4.
Press the
Select button to select the setting. An asterisk (*)
appears to the right of the selected setting.
5.
Press the
Online button to return the printer to online status.
Online
Menu
Item
Value
Select
Ready
Attention
Online
Menu
Item
Value
Select
Ready
Attention
Cancel
TROUBLESHOOTING > 116
PROBLEM SOLVING
PAPER FEED PROBLEMS.
If paper jams become frequent:
>
More than one sheet feeds at a time;
>
Paper curls;
>
Paper feeds at an angle.
PAPER JAM HAS BEEN CLEARED, BUT PRINTER DOES NOT
PRINT.
PRINT.
Possible cause
Remedy
The printer is not
horizontal.
horizontal.
Place the printer on a stable, level surface.
The paper is too thin.
Use the correct type of paper (see Specifications).
The paper is moist or
affected by static.
affected by static.
Store paper within specified temperature and humidity
levels.
levels.
The paper is creased or
wrinkled.
wrinkled.
As above.
The paper is not aligned
correctly.
correctly.
Adjust tray or manual feed guides.
Paper doesn’t feed.
Correct paper feed selection in the printer driver.
Possible cause
Remedy
The top cover has not
remained open until all
paper jams have been
cleared.
remained open until all
paper jams have been
cleared.
Removing a paper jam is not sufficient:
Raise and gently lower the top cover, especially if the
paper jam has been removed from behind the front cover.
Raise and gently lower the top cover, especially if the
paper jam has been removed from behind the front cover.
TROUBLESHOOTING > 117
CANNOT PRINT.
LPT write error displayed.
PRNUSBx write error is displayed.
PRNUSBx write error is displayed.
APPLICATION ERROR OR GENERAL PROTECTION FAULT IS
DISPLAYED.
DISPLAYED.
Possible cause
Remedy
Interface is disabled.
In the printer menu settings, enable Parallel or USB
interface.
interface.
Printer is switched OFF.
Switch ON.
Printer interface cable is
disconnected.
disconnected.
Reconnect the printer interface cable.
A converter, buffer,
extension cable or USB
hub is being used.
extension cable or USB
hub is being used.
Test by connecting the printer and computer directly.
Printer driver output port
is incorrect.
is incorrect.
Set correct output port to which the printer interface cable
is connected.
is connected.
Printer is not selected in
the printer driver.
the printer driver.
Select the printer or set to default printer.
Incorrect printer driver is
being used.
being used.
Delete this printer driver and install correct printer driver.
Possible cause
Remedy
Application is not
suitable for Windows
version.
suitable for Windows
version.
Upgrade the application.
Memory is insufficient
for number of
applications running.
for number of
applications running.
Close all other applications.
Print file is corrupted.
Correct or recreate the file.
Memory is insufficient
for application.
for application.
Increase computer’s memory.
Insufficient free space
on hard disk.
on hard disk.
Delete unnecessary files.
Printer driver is
incorrectly configured.
incorrectly configured.
Correctly configure printer driver.
Click on the first or last page to see other AR-C200P (serv.man6) service manuals if exist.