Sharp AR-C170 (serv.man57) User Manual / Operation Manual ▷ View online
MISFEED REMOVAL
2-19
2
Misfeed in the paper feed area
Misfeed in the 500 sheet paper drawer
1
Open the upper side cover.
Push the lever upward
and gently open the
cover.
and gently open the
cover.
2
Remove the misfed paper.
Be careful not to tear the
misfed paper during
removal.
misfed paper during
removal.
3
If misfed paper is not found in step 2, pull out
paper tray 1 and remove the misfed paper.
paper tray 1 and remove the misfed paper.
Be careful not to tear the
misfed paper during
removal.
misfed paper during
removal.
4
Gently close the paper tray.
Push the tray firmly all
the way into the
machine.
the way into the
machine.
5
Gently close the upper side cover.
After closing, confirm
that the misfeed
message has been
cleared and the normal
display appears.
that the misfeed
message has been
cleared and the normal
display appears.
Misfeed in the bypass tray
1
Remove the misfed paper from the bypass
tray.
tray.
Be careful not to tear the
misfed paper during
removal.
misfed paper during
removal.
2
After removing the misfed paper, open
and close the duplex bypass/inverter unit
to reset.
and close the duplex bypass/inverter unit
to reset.
Grasp the finger hold
and gently open the unit.
and gently open the unit.
After closing, confirm that
the misfeed message
has been cleared and the
normal display appears.
If the duplex bypass/
inverter unit is not
installed, close the side
cover in the same way.
the misfeed message
has been cleared and the
normal display appears.
If the duplex bypass/
inverter unit is not
installed, close the side
cover in the same way.
NOTE
Paper misfed from a paper tray may be extending out of the tray into the right side cover area. In this case if the
tray is drawn out of the machine, the paper may become torn and difficult to remove. To prevent this from
happening, always open the right side cover first and remove the misfed paper if it is extending into that area.
Paper misfed from a paper tray may be extending out of the tray into the right side cover area. In this case if the
tray is drawn out of the machine, the paper may become torn and difficult to remove. To prevent this from
happening, always open the right side cover first and remove the misfed paper if it is extending into that area.
NOTE
If paper is loaded in the bypass tray, temporarily
remove the paper and close the bypass tray before
opening the side cover.
remove the paper and close the bypass tray before
opening the side cover.
NOTE
The misfeed may have occurred inside the machine.
Check carefully and remove it.
Check carefully and remove it.
Apollon_general-copy_EX.book 19 ページ ２００４年６月７日 月曜日 午後１時５９分
MISFEED REMOVAL
2-20
Misfeed in the transport area, fusing area, and exit area
Transport area
1
Open the upper side cover and check for a
misfeed.
misfeed.
Push the lever upward
and gently open the
cover.
and gently open the
cover.
Be careful not to tear the
misfed paper during
removal.
misfed paper during
removal.
2
Gently close the upper side cover.
Exit area
1
Misfeed in the exit area
Models with an exit tray
attached to the duplex
bypass/inverter unit:
Gently remove the misfed
paper as shown in the
illustration, taking care
not to tear the paper.
attached to the duplex
bypass/inverter unit:
Gently remove the misfed
paper as shown in the
illustration, taking care
not to tear the paper.
Models without the
duplex bypass/
inverter unit:
Gently remove the misfed
paper as shown in the
illustration, taking care
not to tear the paper.
duplex bypass/
inverter unit:
Gently remove the misfed
paper as shown in the
illustration, taking care
not to tear the paper.
Upper exit tray:
Gently remove the
misfed paper as shown
in the illustration, taking
care not to tear the
paper.
Gently remove the
misfed paper as shown
in the illustration, taking
care not to tear the
paper.
Fusing area
1
Open the duplex bypass/inverter unit.
Grasp the finger hold
and gently open the unit.
and gently open the unit.
2
Remove the misfed paper as shown in the
illustrations below.
illustrations below.
If paper is misfed in the
transport area, turn roller
rotating knob A in the
direction of the arrow to
remove the misfed paper.
transport area, turn roller
rotating knob A in the
direction of the arrow to
remove the misfed paper.
If you do not find a
misfeed, open the cover
of the fusing unit and
check for a misfeed
inside the fusing unit.
misfeed, open the cover
of the fusing unit and
check for a misfeed
inside the fusing unit.
3
Misfeed in the transfer unit
If paper is misfed on the
transfer belt, remove it
gently without touching
the transfer belt. Do not
pull out the transfer unit.
transfer belt, remove it
gently without touching
the transfer belt. Do not
pull out the transfer unit.
4
Gently close the duplex bypass/inverter unit.
After closing, confirm that
the misfeed message
has been cleared and the
normal display appears.
If the duplex bypass/
inverter unit is not
installed, close the side
cover in the same way.
the misfeed message
has been cleared and the
normal display appears.
If the duplex bypass/
inverter unit is not
installed, close the side
cover in the same way.
NOTE
If paper is loaded in the bypass tray, temporarily remove the
paper and close the bypass tray before opening the side cover.
If paper is loaded in the bypass tray, temporarily remove the
paper and close the bypass tray before opening the side cover.
NOTE
The misfeed may have occurred inside the machine.
Check carefully and remove it.
The misfeed may have occurred inside the machine.
Check carefully and remove it.
NOTE
Even after clearing a misfeed, paper may remain inside
the machine on the transfer belt where it is not visible. In
this case, after visible misfeeds are removed, the paper
on the transfer belt will be automatically moved to a
position where it is visible and a misfeed will be indicated
once again on the display. Clear the misfeed as explained
in "Misfeed in the transfer unit" (step 3 on the right side of
this page). For this reason, it may be necessary to
perform the "Misfeed in the transfer unit" procedure twice.
Even after clearing a misfeed, paper may remain inside
the machine on the transfer belt where it is not visible. In
this case, after visible misfeeds are removed, the paper
on the transfer belt will be automatically moved to a
position where it is visible and a misfeed will be indicated
once again on the display. Clear the misfeed as explained
in "Misfeed in the transfer unit" (step 3 on the right side of
this page). For this reason, it may be necessary to
perform the "Misfeed in the transfer unit" procedure twice.
The fusing unit is hot. Take care in removing paper. (Do
not touch any metal parts.)
not touch any metal parts.)
The fusing unit is hot. Take care in removing paper. (Do not
touch any metal parts.)
touch any metal parts.)
The transfer unit is hot. Take care in removing paper. (Do
not touch any metal parts.)
not touch any metal parts.)
CAUTION
CAUTION
CAUTION
Apollon_general-copy_EX.book 20 ページ ２００４年６月７日 月曜日 午後１時５９分
MISFEED REMOVAL
2-21
2
Misfeed in the stand/1 x 500 sheet paper drawer
1
Open the upper and lower side covers.
Push the lever upward
and gently open the
cover.
and gently open the
cover.
2
Remove the misfed paper.
Be careful not to tear the
misfed paper during
removal.
misfed paper during
removal.
3
If misfed paper is not found in step 2, pull
out paper tray 1 and remove the misfed
paper.
out paper tray 1 and remove the misfed
paper.
Be careful not to tear the
misfed paper during
removal.
misfed paper during
removal.
4
Gently push the paper tray into the
machine.
machine.
Push the tray firmly all the way into the machine.
5
Gently close the upper and lower side
covers.
covers.
After closing, confirm
that the misfeed
message has been
cleared and the normal
display appears.
that the misfeed
message has been
cleared and the normal
display appears.
Misfeed in the stand/3 x 500 sheet paper drawer
To remove a misfeed in the upper, middle, or lower tray, follow steps 1 through 5 above of "Misfeed in the stand/1
x 500 sheet paper drawer".
x 500 sheet paper drawer".
NOTE
Paper misfed from a paper tray may be extending out of the tray into the right side cover area. In this case if the
tray is drawn out of the machine, the paper may become torn and difficult to remove. To prevent this from
happening, always open the right side cover first and remove the misfed paper if it is extending into that area.
tray is drawn out of the machine, the paper may become torn and difficult to remove. To prevent this from
happening, always open the right side cover first and remove the misfed paper if it is extending into that area.
NOTE
If paper is loaded in the bypass tray, temporarily
remove the paper and close the bypass tray before
opening the side cover.
remove the paper and close the bypass tray before
opening the side cover.
NOTE
The misfeed may have occurred inside the machine.
Check carefully and remove it.
Check carefully and remove it.
Apollon_general-copy_EX.book 21 ページ ２００４年６月７日 月曜日 午後１時５９分
MISFEED REMOVAL
2-22
Misfeed in the duplex bypass/inverter unit and duplex
module/2 x 500 sheet paper drawer
module/2 x 500 sheet paper drawer
1
Perform steps 1 and 2 of "Misfeed in the
stand/1 x 500 sheet paper drawer" on the
previous page.
stand/1 x 500 sheet paper drawer" on the
previous page.
2
Open the upper cover of the duplex
bypass/inverter unit.
bypass/inverter unit.
3
Remove the misfeed from the upper part of
the duplex bypass/inverter unit.
the duplex bypass/inverter unit.
Hold the upper cover of
the unit open while
removing the misfed
paper.
the unit open while
removing the misfed
paper.
4
Close the upper cover of the duplex
bypass/inverter unit.
bypass/inverter unit.
5
Lift the exit tray if one is installed and open
the cover of the duplex bypass/inverter
unit.
the cover of the duplex bypass/inverter
unit.
6
Remove the misfed paper.
While holding the exit
tray up, remove the
misfed paper as shown
in the illustration. Be
careful not to tear the
misfed paper during
removal.
tray up, remove the
misfed paper as shown
in the illustration. Be
careful not to tear the
misfed paper during
removal.
7
Close the cover of the duplex bypass/
inverter unit and return the exit tray to its
original position.
inverter unit and return the exit tray to its
original position.
8
Remove a misfeed from the bottom of the
duplex bypass/inverter unit.
duplex bypass/inverter unit.
Gently remove the
misfed paper from the
bottom of the duplex
bypass/inverter unit as
shown in the illustration,
taking care not to tear
the paper.
misfed paper from the
bottom of the duplex
bypass/inverter unit as
shown in the illustration,
taking care not to tear
the paper.
Make sure that there is
no misfed paper in the
machine.
no misfed paper in the
machine.
9
Pull out the duplex module of the duplex
module/2 x 500 sheet paper drawer.
module/2 x 500 sheet paper drawer.
NOTE
Paper misfed from a paper tray may be extending out of the tray into the right side cover area. In this case if the
tray is drawn out of the machine, the paper may become torn and difficult to remove. To prevent this from
happening, always open the right side cover first and remove the misfed paper if it is extending into that area.
tray is drawn out of the machine, the paper may become torn and difficult to remove. To prevent this from
happening, always open the right side cover first and remove the misfed paper if it is extending into that area.
Apollon_general-copy_EX.book 22 ページ ２００４年６月７日 月曜日 午後１時５９分
Click on the first or last page to see other AR-C170 (serv.man57) service manuals if exist.