Sharp AR-C170 (serv.man26) Service Manual ▷ View online
AR-C170M SIMULATION 9 - 9
46
27
Used to adjust the gamma/density in
the black edge section of the copy
mode image. (Black text and black
line reproduction adjustment)
the black edge section of the copy
mode image. (Black text and black
line reproduction adjustment)
Adjustment
Image process (ICU)
Picture quality
Color balance
40
Collective adjustment of FAX mode
(all modes) document scan density
(When the FAX is installed)
(all modes) document scan density
(When the FAX is installed)
Adjustment
ICU PWB / FAX
Picture quality
41
Used to adjust the FAX mode
(normal mode) document scan
density (when the FAX is installed).
(normal mode) document scan
density (when the FAX is installed).
Adjustment
ICU PWB / FAX
Picture quality
42
Used to adjust the FAX mode (fine
text mode) document scan density
(when the FAX is installed).
text mode) document scan density
(when the FAX is installed).
Adjustment
ICU PWB / FAX
Picture quality
43
Used to adjust the FAX mode (super
fine mode) document scan density
(when the FAX is installed).
fine mode) document scan density
(when the FAX is installed).
Adjustment
ICU PWB / FAX
Picture quality
44
Used to adjust the FAX mode (ultra-
fine mode) document scan density
(when the FAX is installed).
fine mode) document scan density
(when the FAX is installed).
Adjustment
ICU PWB / FAX
Picture quality
48
1
Used to adjust the copy
magnification ratio (main scanning,/
sub scanning direction, document
feeder unit front surface, document
feeder unit back surface).
magnification ratio (main scanning,/
sub scanning direction, document
feeder unit front surface, document
feeder unit back surface).
Adjustment
Picture quality
Size/
magnification
ratio
magnification
ratio
6
Used to adjust each motor RPM.
Adjustment
Operation
49
1
Used for firmware version up
(Machine/FAX).
(Machine/FAX).
Version up
Firmware (Machine/FAX)
Operation
2
Used to set the data communication
speed in version up of the machine
firmware.
speed in version up of the machine
firmware.
Version up
Firmware
Operation
10
Used for firmware version up (Desk
unit).
unit).
Version up
Firmware (Desk unit)
Operation
50
1
Used to adjust the copy image
position and the void area (image
loss) on print paper in the copy
mode. (The similar adjustment can
be made also by SIM 50-2 (Simple
method).)
position and the void area (image
loss) on print paper in the copy
mode. (The similar adjustment can
be made also by SIM 50-2 (Simple
method).)
Adjustment
Picture quality
Image position
2
Used to adjust the copy image
position and the void area (image
loss) on print paper in the copy
mode. (Simple method)
(The same content of SIM 50-1.
However this simulation is easier to
perform.)
position and the void area (image
loss) on print paper in the copy
mode. (Simple method)
(The same content of SIM 50-1.
However this simulation is easier to
perform.)
Adjustment
Picture quality
Image position
5
Used to adjust the image position
and print area in the sub scanning
direction. (Print engine section)
and print area in the sub scanning
direction. (Print engine section)
Adjustment
ICU/Printer
Picture quality
6
Used to adjust the document lead
edge and image loss quantity of the
document feeder unit.
edge and image loss quantity of the
document feeder unit.
Adjustment
Automatic document
feeder
feeder
Picture quality
10
Used to adjust the print image center
position. (Adjustment is performed in
each paper feed position
separately.)
position. (Adjustment is performed in
each paper feed position
separately.)
Adjustment
Image process (ICU)
Picture quality
Image position
12
Used to adjust the print image center
position. (The adjustment is
performed in each document mode
separately.)
position. (The adjustment is
performed in each document mode
separately.)
Adjustment
Image process (ICU)
Picture quality
Image position
20
Used to adjust the image
registration. (Manual adjustment)
registration. (Manual adjustment)
Adjustment
Picture quality
Image position
22
Used to adjust the image
registration. (Automatic adjustment)
registration. (Automatic adjustment)
Adjustment
Picture quality
Image position
24
Used to display the adjustment data
of automatic registration.
of automatic registration.
Adjustment
Picture quality
Image position
27
Used to adjust image loss in the
FAX/scanner mode.
FAX/scanner mode.
Adjustment
FAX/Scanner
Picture quality
28
Used to adjust automatic void
(service installation adjustment).
(service installation adjustment).
Adjustment
Picture quality
Image position
Code
Function (Purpose)
Purpose
Section
Item
Main
Sub
AR-C170M SIMULATION 9 - 10
51
1
Used to adjust the transfer voltage
ON timing.
ON timing.
Adjustment
Process
(Photoconductor,
developing, transfer,
cleaning)
(Photoconductor,
developing, transfer,
cleaning)
Transfer
Operation
2
Used to adjust the contact pressure
of paper on the resist roller of each
section (each paper feed and duplex
feed of the copier).
(This adjustment is required when
the print image position variations
are considerably great or when
paper jams occur frequently.)
of paper on the resist roller of each
section (each paper feed and duplex
feed of the copier).
(This adjustment is required when
the print image position variations
are considerably great or when
paper jams occur frequently.)
Adjustment
Paper transport (Paper
exit, switchback,
transport)
exit, switchback,
transport)
Operation
52
1
Used to adjust the duplex print mode
stacking capacity (Used to adjust the
stop position of the duplex unit paper
tray width alignment plate. The
home position of the width alignment
plate is changed by software.)
stacking capacity (Used to adjust the
stop position of the duplex unit paper
tray width alignment plate. The
home position of the width alignment
plate is changed by software.)
Adjustment
Duplex
Operation
53
8
Used to adjust the document feeder
unit document scanning position.
unit document scanning position.
Adjustment
Automatic document
feeder
feeder
Operation
60
1
Used to check the operation of ICU
PWB image DRAM read/write.
PWB image DRAM read/write.
Operation test/check
ICU (Memory)
Operation
2
Used to set the onboard SRAM.
Setting
SDRAM
61
4
Used to adjust the scanner (writing)
unit (LED array unit) skew.
unit (LED array unit) skew.
Adjustment
Scanner (writing)
Operation
63
1
Used to check the result of shading
correction. (The shading correction
data are displayed.)
correction. (The shading correction
data are displayed.)
Adjustment/Setting/
Operation data output,
check (display, print)
Operation data output,
check (display, print)
Scanner (Exposure)
Operation
3
Used to adjust the CCD color
balance (gamma).
balance (gamma).
Adjustment
Scanner (reading)
Picture quality
Color balance
5
Used to set the CCD color balance
(gamma) default.
(gamma) default.
Setting
Scanner (reading)
Picture quality
Color balance
6
Used to check the color balance
(gamma) check patch.
(gamma) check patch.
Adjustment/Operation
data output check
(display, print)
data output check
(display, print)
Image process (ICU)
Picture quality
Color balance
7
Used to set the target color balance
(gamma) for auto color balance
adjustment. The standard color
balance (gamma) or an optional
color balance (gamma) is set as the
service target.
(gamma) for auto color balance
adjustment. The standard color
balance (gamma) or an optional
color balance (gamma) is set as the
service target.
Setting
Image process (ICU)
Picture quality
Color balance
8
Used to set the service target of the
automatic color balance adjustment
(SIM 46-24) and the automatic color
balance adjustment target of the key
operator program to the same
balance as the factory target of the
automatic color balance adjustment
(SIM 46-24).
automatic color balance adjustment
(SIM 46-24) and the automatic color
balance adjustment target of the key
operator program to the same
balance as the factory target of the
automatic color balance adjustment
(SIM 46-24).
Setting
Scanner (reading)
Picture quality
Color balance
9
Used to adjust the CCD gamma
(CCD calibration) (copy document
mode).
(CCD calibration) (copy document
mode).
Setting
Scanner (reading)
Picture quality
Color balance
10
Used to set the copy document
mode color balance (gamma)
default.
mode color balance (gamma)
default.
Setting
Scanner (Image
scanning)
scanning)
Picture quality
Color balance
11
Used to set the factory color balance
in the automatic color balance
adjustment (SIM 46-24).
in the automatic color balance
adjustment (SIM 46-24).
Setting
Scanner (reading)
Picture quality
64
1
Used to adjust the operations of the
printer section (self-print operation/
color). (The print pattern, paper feed
mode, print mode, print quantity, and
density can be changed optionally.)
printer section (self-print operation/
color). (The print pattern, paper feed
mode, print mode, print quantity, and
density can be changed optionally.)
Operation test/check
Printer
Operation
2
Used to print the color patch image
(adjustment pattern). The above
color patch image (adjustment
pattern) is outputted according to the
currently adjusted color balance
(gamma). Use SIM 63-7 to read the
color patch image (adjustment
pattern), which can be used as the
service target of the automatic color
balance (gamma) adjustment.
(adjustment pattern). The above
color patch image (adjustment
pattern) is outputted according to the
currently adjusted color balance
(gamma). Use SIM 63-7 to read the
color patch image (adjustment
pattern), which can be used as the
service target of the automatic color
balance (gamma) adjustment.
Adjustment/Setting/
Operation data output,
check (display, print)
Operation data output,
check (display, print)
Printer
Operation
Code
Function (Purpose)
Purpose
Section
Item
Main
Sub
AR-C170M SIMULATION 9 - 11
64
3
Used to check the operations of the
printer section (self-print operation/
BW). (The print pattern, the paper
feed mode, the print mode, the print
quantity, and the density can be set
optionally.)
printer section (self-print operation/
BW). (The print pattern, the paper
feed mode, the print mode, the print
quantity, and the density can be set
optionally.)
Operation test/check
Printer
Operation
65
1
Used to adjust the touch panel (LCD
display section) detection position.
display section) detection position.
Adjustment
Operation (Display,
procedure)
procedure)
2
Used to check the result of the touch
panel (LCD display) detection
position adjustment. (The
coordinates are displayed.)
panel (LCD display) detection
position adjustment. (The
coordinates are displayed.)
Adjustment/Setting/
Operation data output,
check (display, print)
Operation data output,
check (display, print)
Operation (Display,
procedure)
procedure)
66
01
Used to change/set the soft SW
setting (FAX-related items). (When
the FAX is installed.)
setting (FAX-related items). (When
the FAX is installed.)
Setting
FAX
02
Used to initialize the soft SW setting
(FAX-related items) according to the
destination. (When the FAX is
installed.)
(FAX-related items) according to the
destination. (When the FAX is
installed.)
Setting
FAX
Data
Initializing
03
Used to check the memory on the
Modem controller. (When the FAX is
installed.)
Modem controller. (When the FAX is
installed.)
Operation test/check
FAX
Operation
04
Used to select a signal and send it to
the line and speaker (at the max.
level). (When the FAX is installed.)
the line and speaker (at the max.
level). (When the FAX is installed.)
Operation test/check
FAX
Operation
05
Used to select a signal and send it to
the line and the speaker. (Level: Soft
SW setting) (When the FAX is
installed.)
the line and the speaker. (Level: Soft
SW setting) (When the FAX is
installed.)
Operation test/check
FAX
Operation
06
Used to print the check list of the
contents when confidential
registration is made. (When the FAX
is installed.)
contents when confidential
registration is made. (When the FAX
is installed.)
Data output/check
FAX
Data
Confidential pass
code
code
07
Used to print all the images in the
memory. (When the FAX is
installed.)
memory. (When the FAX is
installed.)
Data output/check
FAX
Data
Image data
08
Used to select a voice message and
send it to the line and the speaker (at
the max. level). (When the FAX is
installed.)
send it to the line and the speaker (at
the max. level). (When the FAX is
installed.)
Operation test/check
FAX
Operation
09
Used to select a signal and send it to
the line and the speaker. (Level: soft
SW setting). (When the FAX is
installed.)
the line and the speaker. (Level: soft
SW setting). (When the FAX is
installed.)
Operation test/check
FAX
Operation
10
All the images in the memory can be
deleted. (When the FAX is installed.)
deleted. (When the FAX is installed.)
Data clear
FAX
Data
Image data
11
Used to select a pattern and send it
to the line and the speaker at
300bps (at the max. level). (When
the FAX is installed.)
to the line and the speaker at
300bps (at the max. level). (When
the FAX is installed.)
Operation test/check
FAX
Operation
12
Used to select a pattern and send it
to the line and the speaker at
300bps. (Level: soft SW setting)
(When the FAX is installed.)
to the line and the speaker at
300bps. (Level: soft SW setting)
(When the FAX is installed.)
Operation test/check
FAX
Operation
13
Used to register a dial number for
test used in SIM 66-14/15/16. (When
the FAX is installed.)
test used in SIM 66-14/15/16. (When
the FAX is installed.)
Setting
FAX
Data
Registration
14
Used to adjust and check the make
time of dial pulse (10pps). (When the
FAX is installed.)
time of dial pulse (10pps). (When the
FAX is installed.)
Adjustment
FAX
Operation
15
Used to adjust and check the make
time of the dial pulse (20pps). (When
the FAX is installed.)
time of the dial pulse (20pps). (When
the FAX is installed.)
Adjustment
FAX
Operation
16
Used to adjust and check the send
level of DTFM signal. (When the
FAX is installed.)
level of DTFM signal. (When the
FAX is installed.)
Adjustment
FAX
Operation
17
Used to select the DTFM signal (1 –
9, 0, *, #) to send it to the line and
the speaker (at the max. level).
(When the FAX is installed.)
9, 0, *, #) to send it to the line and
the speaker (at the max. level).
(When the FAX is installed.)
Operation test/check
FAX
Operation
18
Used to select the DTFM signal (1 –
9, 0, *, #) to send it to the line and
the speaker (Level: soft SW setting).
(When the FAX is installed.)
9, 0, *, #) to send it to the line and
the speaker (Level: soft SW setting).
(When the FAX is installed.)
Operation test/check
FAX
Operation
Code
Function (Purpose)
Purpose
Section
Item
Main
Sub
AR-C170M SIMULATION 9 - 12
66
19
Used to write the ICU PWB SRAM
contents (various set values and
user data) into the Flash ROM (AR-
MM9). (When the FAX is installed.)
contents (various set values and
user data) into the Flash ROM (AR-
MM9). (When the FAX is installed.)
Backup
FAX
Data
20
Used to write the Flash ROM (AR-
MM9) contents (SRAM contents
written with SIM 66-19) into the ICU
PWB SRAM. (When the FAX is
installed.)
MM9) contents (SRAM contents
written with SIM 66-19) into the ICU
PWB SRAM. (When the FAX is
installed.)
Backup
FAX
Data
21
Used to print various registration
information, communication, file
management, system error, and
protocol information. (When the FAX
is installed.)
information, communication, file
management, system error, and
protocol information. (When the FAX
is installed.)
Check
FAX
Data
22
Used to set the sound volume of the
handset. (When the FAX is
installed.)
handset. (When the FAX is
installed.)
Setting
FAX
Operation
23
Used to download the FAX program.
(When the FAX is installed.)
(When the FAX is installed.)
Setting
FAX
Operation
24
Used to clear the data in the FAST
memory. (When the FAX is
installed.)
memory. (When the FAX is
installed.)
Data clear
FAX
Data
Initializing
29
Used to clear the data related to the
address book (one-touch
registration, program registration/
expansion, interface memory box
registration, each table contents).
(When the FAX is installed.)
address book (one-touch
registration, program registration/
expansion, interface memory box
registration, each table contents).
(When the FAX is installed.)
Data clear
FAX
Data
Initializing
30
Used to check the status change of
the TEL/LIU sensor. (When the FAX
is installed.)
the TEL/LIU sensor. (When the FAX
is installed.)
Operation test/check
FAX
Operation
31
Used to set ON/OFF of each port for
output to the TEL/LIU. (When the
FAX is installed.)
output to the TEL/LIU. (When the
FAX is installed.)
Setting
FAX
Operation
32
Used to check (compare) the
received data (fixed data) from the
line to make judgment of error or
normal. (When the FAX is installed.)
received data (fixed data) from the
line to make judgment of error or
normal. (When the FAX is installed.)
Operation test/check
FAX
Operation
33
Used to detect signals (BUSY
TONE/CNG/CED/FNET) from the
line. (When the FAX is installed.)
TONE/CNG/CED/FNET) from the
line. (When the FAX is installed.)
Operation test/check
FAX
Operation
34
Used to display the time required for
sending the test image data. (When
the FAX is installed.)
sending the test image data. (When
the FAX is installed.)
Operation test/check
FAX
Operation
35
Used to rewrite the Modem program.
(When the FAX is installed.)
(When the FAX is installed.)
Setting
FAX
Data
Writing
36
Used to check send/receive (data/
command line) from the Modem
controller to the MFP controller.
(When the FAX is installed)
command line) from the Modem
controller to the MFP controller.
(When the FAX is installed)
Operation test/check
FAX
Operation
39
Used to set the destination of the
FAX. (When the FAX is installed.)
FAX. (When the FAX is installed.)
Setting
FAX
Specifications
Code
Function (Purpose)
Purpose
Section
Item
Main
Sub
Click on the first or last page to see other AR-C170 (serv.man26) service manuals if exist.