Sharp AR-C170 (serv.man26) Service Manual ▷ View online
AR-C170M SIMULATION 9 - 5
24
4
Used to reset the maintenance
counter.
counter.
Data clear
Counter
Maintenance
6
Used to clear the copy counters.
Data clear
Counter
7
Used to clear the OPC drum
(membrane decrease) correction
counter. (This simulation is
performed with the OPC drum is
replaced.)
(membrane decrease) correction
counter. (This simulation is
performed with the OPC drum is
replaced.)
Data clear
Process
(Photoconductor,
developing, transfer,
cleaning)
(Photoconductor,
developing, transfer,
cleaning)
Photoconductor
Counter
Photoconductor
8
Used to clear the waste toner
counter in the transfer section.
counter in the transfer section.
Data clear
Process
(Photoconductor,
developing, transfer,
cleaning)
(Photoconductor,
developing, transfer,
cleaning)
Transfer
Counter
9
Used to clear the printer mode
counter and the self-print mode print
counter. (After completion of
maintenance, the counters are
cleared.)
counter and the self-print mode print
counter. (After completion of
maintenance, the counters are
cleared.)
Data clear
Printer
Counter
Printer
10
Used to clear the FAX counter.
(When the FAX is installed)
(When the FAX is installed)
Data clear
FAX
Counter
15
Used to clear the network scanner
counter.
counter.
Data clear
Scanner section
Counter
25
1
Used to check the operation of the
process section (excluding the
image process section) and the
toner remaining quantity sensor.
(The toner remaining quantity sensor
output can be monitored.)
process section (excluding the
image process section) and the
toner remaining quantity sensor.
(The toner remaining quantity sensor
output can be monitored.)
Operation test/check
Process
(Photoconductor,
developing, transfer,
cleaning)
(Photoconductor,
developing, transfer,
cleaning)
Operation
26
2
1. Used to set the paper size of the
large capacity tray. (When the
paper size is changed, the
software setup must be changed
accordingly with this simulation.)
paper size is changed, the
software setup must be changed
accordingly with this simulation.)
2. Used to detect 8.5 " x 13" (INCH
Series) paper or documents and
to set the display mode. (All
paper feed modes)
to set the display mode. (All
paper feed modes)
3. Used to set the display form of
the paper kind in the manual
paper feed mode.
paper feed mode.
Setting
Paper feed
Specifications
3
Used to set the auditor specification
mode. Setting must be made
according to the use conditions of
the auditor.
mode. Setting must be made
according to the use conditions of
the auditor.
Setting
Auditor
Specifications
5
Used to set the count mode of the
total counter and the maintenance
counter.
total counter and the maintenance
counter.
Setting
Specifications
Counter
6
Used to set the destination
specifications (paper, fixed copy
magnification ratios, image
(process) correction, machine
operation in case of an error, etc.).
specifications (paper, fixed copy
magnification ratios, image
(process) correction, machine
operation in case of an error, etc.).
Setting
Specifications
Destination
10
Used to set the trial mode of the
network scanner.
network scanner.
Setting
Scanner
Specifications
18
Used to set YES/NO of toner save
operation. (This simulation is Enable
only for Japan and UK versions. It
depends on SIM 26-6 (Destination)
setting.
For the other destinations, the same
setting can be made by the user
program P22. (Effective only in the
monochrome copy mode)
operation. (This simulation is Enable
only for Japan and UK versions. It
depends on SIM 26-6 (Destination)
setting.
For the other destinations, the same
setting can be made by the user
program P22. (Effective only in the
monochrome copy mode)
Setting
Specifications
Operation mode
(Common)
(Common)
35
Used to set whether the trouble
history display by SIM 22-4 is
displayed as one trouble or as the
accumulated number of continuous
troubles when two or more troubles
of same kind occur continuously.
history display by SIM 22-4 is
displayed as one trouble or as the
accumulated number of continuous
troubles when two or more troubles
of same kind occur continuously.
Setting
Specifications
38
Used to set "Continue/Stop" of
printing when the maintenance
timing (replacement timing of each
consumable part) is reached.
printing when the maintenance
timing (replacement timing of each
consumable part) is reached.
Setting
Specifications
41
Used to set Enable/Disable of AMS
operation in the center-binding
mode.
operation in the center-binding
mode.
Setting
Specifications
49
Used to set the copy speed mode.
Setting
Specifications
Operation mode
Code
Function (Purpose)
Purpose
Section
Item
Main
Sub
AR-C170M SIMULATION 9 - 6
26
50
Used to set Black-White reverse,
group rounding, and scanner send
time display.
group rounding, and scanner send
time display.
Setting
Specifications
Operation mode
52
Used to set YES/NO of count up of
non-copy paper (cover or insertion
paper).
non-copy paper (cover or insertion
paper).
Setting
Specifications
Operation mode
53
Used by the user to set Enable/
Disable auto color calibration (auto
adjustment of color balance and
density)
Disable auto color calibration (auto
adjustment of color balance and
density)
Setting
Specifications
Operation mode
54
Used to set enable/disable of auto
color calibration for the printer.
color calibration for the printer.
Setting
Specifications
Operation mode
57
Used to set the model name for use
as the status information.
as the status information.
Setting
Specifications
65
Used to set the finisher alarm mode. Setting
Specifications
69
Used to set the operation
specifications in case of toner
cartridge life near end.
specifications in case of toner
cartridge life near end.
Setting
Specifications
72
Used to set disable/enable of the
high image quality mode in BW
copy.
high image quality mode in BW
copy.
Setting
Specifications
27
1
Used to set the specifications for
operations in case of communication
trouble between the host computer
and MODEM (machine side). (When
communication trouble occurs
between the host computer MODEM
and the machine, the self diag
display (U7-00) is printed and setting
for inhibition of print or not is made.)
operations in case of communication
trouble between the host computer
and MODEM (machine side). (When
communication trouble occurs
between the host computer MODEM
and the machine, the self diag
display (U7-00) is printed and setting
for inhibition of print or not is made.)
Operation test/check
Communication (RIC/
MODEM)
MODEM)
Specifications
Operation mode
(Common)
(Common)
5
Used to enter the machine tag No.
(This function allows to check the tag
No. of the machine with the host
computer.)
(This function allows to check the tag
No. of the machine with the host
computer.)
Setting
Communication (RIC/
MODEM)
MODEM)
Data
User data
30
1
Used to check the operation of
sensors and detectors in the paper
feed, paper transport, paper exit
sections and the related circuits.
sensors and detectors in the paper
feed, paper transport, paper exit
sections and the related circuits.
Operation test/check
Operation
2
Used to check the operation of
sensors and detectors in the paper
feed section and the related circuits.
(The operation of the paper feed
sensors and detectors can be
monitored with the LCD display.)
sensors and detectors in the paper
feed section and the related circuits.
(The operation of the paper feed
sensors and detectors can be
monitored with the LCD display.)
Operation test/check
Paper feed
Operation
33
1
Used to check the operation of the
card reader and the sensors and the
related circuits. (The card reader
sensor operation can be monitored
with the LCD display.)
card reader and the sensors and the
related circuits. (The card reader
sensor operation can be monitored
with the LCD display.)
Operation test/check
Others
Operation
40
1
Used to check the operation of the
manual feed tray paper size detector
and the related circuit. (The
operation of the manual feed tray
paper size detector can be
monitored with the LCD display.)
manual feed tray paper size detector
and the related circuit. (The
operation of the manual feed tray
paper size detector can be
monitored with the LCD display.)
Operation test/check
Paper feed
Operation
2
Used to adjust the manual feed tray
paper width detector detection level.
paper width detector detection level.
Adjustment
Paper feed
Operation
7
Used to enter the adjustment value
of the manual paper feed tray paper
width detector detection level.
(Setting)
of the manual paper feed tray paper
width detector detection level.
(Setting)
Setting
Paper feed
Specifications
41
1
Used to check the operation of the
document size sensor and the
related circuit. (The operation of the
document size sensor can be
monitored with the LCD display.)
Sensor ON/OFF check
document size sensor and the
related circuit. (The operation of the
document size sensor can be
monitored with the LCD display.)
Sensor ON/OFF check
Operation test/check
Others
Operation
2
Used to adjust the document size
sensor detection level.
sensor detection level.
Adjustment
Others
Operation
3
Used to check the operation of the
document size sensor and the
related circuit. (The document size
sensor output level can be
monitored with the LCD display.)
Current sensor (A/D) value
document size sensor and the
related circuit. (The document size
sensor output level can be
monitored with the LCD display.)
Current sensor (A/D) value
Operation test/check
Others
Operation
Code
Function (Purpose)
Purpose
Section
Item
Main
Sub
AR-C170M SIMULATION 9 - 7
43
1
Used to set the fusing temperature in
each operation mode.
each operation mode.
Setting
Fixing (Fusing)
Operation
4
Used to set the fusing temperature
for each paper.
for each paper.
Setting
Fixing (Fusing)
Operation
44
1
Used to set enable/disable of
correction operations in the image
forming (process) section.
correction operations in the image
forming (process) section.
Setting
Process
(Photoconductor,
developing, transfer,
cleaning)
(Photoconductor,
developing, transfer,
cleaning)
Operation
2
Black image density sensor
adjustment
adjustment
Adjustment
Process (Transfer)
Operation
4
Image forming section correction,
image density sensor adjustment
conditions setup
image density sensor adjustment
conditions setup
Setting
Process
(Photoconductor,
development, transfer)
(Photoconductor,
development, transfer)
Picture quality
6
Used to forcibly execute the image
forming section correction (high
density process correction) (process
correction).
forming section correction (high
density process correction) (process
correction).
Operation test/check
Process
(Photoconductor,
developing, transfer,
cleaning)
(Photoconductor,
developing, transfer,
cleaning)
Operation
9
Used to check the data related to the
image forming section correction
(the corrected main charger grid
voltage in each print mode, the
developing bias voltage, etc.). (Used
to check that correction is performed
normally or not.)
image forming section correction
(the corrected main charger grid
voltage in each print mode, the
developing bias voltage, etc.). (Used
to check that correction is performed
normally or not.)
Adjustment/Setting/
Operation data output,
check (display, print)
Operation data output,
check (display, print)
Process
(Photoconductor,
developing, transfer,
cleaning)
(Photoconductor,
developing, transfer,
cleaning)
Data
Operation data
(Machine
conditions)
(Machine
conditions)
12
Used to check the sampling toner
image patch density data in the
image forming section correction
(high-density correction) (process
correction). This simulation allows to
check if the correction operation is
performed normally.)
image patch density data in the
image forming section correction
(high-density correction) (process
correction). This simulation allows to
check if the correction operation is
performed normally.)
Adjustment/Setting/
Operation data output,
check (display, print)
Operation data output,
check (display, print)
Process
(Photoconductor,
developing, transfer,
cleaning)
(Photoconductor,
developing, transfer,
cleaning)
Data
Operation data
(Machine
conditions)
(Machine
conditions)
13
Color image density sensor
adjustment (Adjustment by the
adjustment jig)
adjustment (Adjustment by the
adjustment jig)
Adjustment
Process (Transfer)
14
Used to monitor the output level of
the fusing temperature sensor, the
machine temperature sensor, and
the humidity sensor.
the fusing temperature sensor, the
machine temperature sensor, and
the humidity sensor.
Adjustment/Setting/
Operation data output,
check (display, print)
Operation data output,
check (display, print)
Others
21
Used to store color balance
adjustment data. (Half tone image
correction initial setting) (After
execution of color balance
adjustment with SIM 46-21, this
simulation must be executed.)
adjustment data. (Half tone image
correction initial setting) (After
execution of color balance
adjustment with SIM 46-21, this
simulation must be executed.)
Setting
Picture quality
22
Used to check each color toner
patch image density UITU in half
tone image forming section
correction (process correction). (This
simulation allows to check if
correction operation is performed
normally.)
patch image density UITU in half
tone image forming section
correction (process correction). (This
simulation allows to check if
correction operation is performed
normally.)
Adjustment/Setting/
Operation data output,
check (display, print)
Operation data output,
check (display, print)
Process
(Photoconductor,
developing, transfer,
cleaning)
(Photoconductor,
developing, transfer,
cleaning)
Data
Operation data
(Machine
conditions)
(Machine
conditions)
24
Used to check the half tone
correction result. (This simulation
allows to check if correction is
executed properly or not.)
correction result. (This simulation
allows to check if correction is
executed properly or not.)
Adjustment/Setting/
Operation data output,
check (display, print)
Operation data output,
check (display, print)
Process
(Photoconductor,
developing, transfer,
cleaning)
(Photoconductor,
developing, transfer,
cleaning)
Data
Operation data
(Machine
conditions)
(Machine
conditions)
25
Setting the half tone correction
conditions.
conditions.
Adjustment/Setting/
Operation data output,
check (display, print)
Operation data output,
check (display, print)
Process
(Photoconductor,
developing, transfer,
cleaning)
(Photoconductor,
developing, transfer,
cleaning)
Data
Operation data
(Machine
conditions)
(Machine
conditions)
26
Used to execute half tone correction
compulsorily.
compulsorily.
Adjustment
Process
(Photoconductor,
developing, transfer,
cleaning)
(Photoconductor,
developing, transfer,
cleaning)
Picture quality
27
Used to clear the half tone correction
data and set to the default level.
data and set to the default level.
Data clear
Process
(Photoconductor,
developing, transfer,
cleaning)
(Photoconductor,
developing, transfer,
cleaning)
Data
36
Color image density sensor and
black image density sensor
adjustment (simple adjustment)
black image density sensor
adjustment (simple adjustment)
Adjustment
Process (Transfer)
46
1
Used to adjust the copy density of
each color copy mode in the low-
density area. The copy densities of
all colors in the low-density areas
are changed.
each color copy mode in the low-
density area. The copy densities of
all colors in the low-density areas
are changed.
Adjustment
Process
(Photoconductor,
developing, transfer,
cleaning)
(Photoconductor,
developing, transfer,
cleaning)
Picture quality
Density
Code
Function (Purpose)
Purpose
Section
Item
Main
Sub
AR-C170M SIMULATION 9 - 8
46
2
Used to adjust the copy density of
the low-density area in each
monochrome copy mode. The copy
density of the low-density area is
changed.
the low-density area in each
monochrome copy mode. The copy
density of the low-density area is
changed.
Adjustment
Process
(Photoconductor,
developing, transfer,
cleaning)
(Photoconductor,
developing, transfer,
cleaning)
Picture quality
Density
4
Used to adjust the image density
(color mode) in the network scan
mode.
(color mode) in the network scan
mode.
Adjustment
Scanner (reading)
Picture quality
Density
5
Used to adjust the image density
(monochrome mode) in the network
scan mode.
(monochrome mode) in the network
scan mode.
Adjustment
Scanner (reading)
Picture quality
Density
6
1) Used to set the CCD black level
offset level.
2) Used to set the CCD white level
gain.
Adjustment
Scanner (reading)
Picture quality
8
Image color balance adjustment in
the network scan mode
the network scan mode
Adjustment
Scanner (reading)
Picture quality
9
Used to set the exposure adjustment
value in each document feeder unit
mode.
value in each document feeder unit
mode.
Setting
Automatic document
feeder
feeder
Picture quality
10
Used to adjust the copy color
balance (color) (copy document
mode) (gamma/density adjustment
for each color)
balance (color) (copy document
mode) (gamma/density adjustment
for each color)
Adjustment
Image process (ICU)
Picture quality
Color balance
11
Used to adjust the copy color
balance (color) (text mode/map
mode) (gamma/density adjustment
for each color)
balance (color) (text mode/map
mode) (gamma/density adjustment
for each color)
Adjustment
Image process (ICU)
Picture quality
Color balance
12
Used to adjust the copy color
balance (color) (text/printed photo
mode/Photograph mode) (gamma/
density adjustment for each color)
balance (color) (text/printed photo
mode/Photograph mode) (gamma/
density adjustment for each color)
Adjustment
Image process (ICU)
Picture quality
Color balance
13
Used to adjust the copy color
balance (color) (photograph mode)
(gamma/density adjustment for each
color)
balance (color) (photograph mode)
(gamma/density adjustment for each
color)
Adjustment
Image process (ICU)
Picture quality
Color balance
14
Used to adjust the copy color
balance (color) (text/photograph
mode) (gamma/density adjustment
for each color)
balance (color) (text/photograph
mode) (gamma/density adjustment
for each color)
Adjustment
Image process (ICU)
Picture quality
Color balance
15
Engine color balance manual
correction
correction
Adjustment
Image process (ICU)
Picture quality
Density
16
Used to adjust the gamma and
density. (Monochrome mode) (The
adjustment check pattern is printed.)
density. (Monochrome mode) (The
adjustment check pattern is printed.)
Adjustment
Image process (ICU)
Picture quality
Density
19
1. Used to set half tone (gamma)
selection (destination setting) in
the monochrome auto copy
mode.
the monochrome auto copy
mode.
2. Used to set the automatic
exposure operation mode
(Monochrome copy mode, FAX
mode, monochrome scanner
mode).
(Monochrome copy mode, FAX
mode, monochrome scanner
mode).
Adjustment
Scanner (reading)
Picture quality
20
Used to adjust copy color balance
(All color copy mode gamma/density
adjustment) (All color copy mode
color balance/gamma/density are
changed.) Same as SIM 46-21,
however, printing is not performed.
(All color copy mode gamma/density
adjustment) (All color copy mode
color balance/gamma/density are
changed.) Same as SIM 46-21,
however, printing is not performed.
Adjustment
Image process (ICU)
Picture quality
Color balance
21
Used to adjust copy color balance
(All color copy mode gamma/density
adjustment) (All color copy mode
color balance/gamma/density are
changed.)
(All color copy mode gamma/density
adjustment) (All color copy mode
color balance/gamma/density are
changed.)
Adjustment
Image process (ICU)
Picture quality
Color balance
23
Used to set Enable/Disable of half-
tone high-density correction.
tone high-density correction.
Setting
Picture quality
Color balance
24
Used to adjust the copy color
balance automatically. (All color
copy mode gamma/density
adjustment)
balance automatically. (All color
copy mode gamma/density
adjustment)
Adjustment
Picture quality
Color balance
25
Used to adjust copy color balance
(Single color mode)
(Single color mode)
Adjustment
Image process (ICU)
Picture quality
Color balance
26
Used to set the copy color balance
adjustment to the default. (Single
color copy mode)
adjustment to the default. (Single
color copy mode)
Adjustment
Image process (ICU)
Picture quality
Color balance
Code
Function (Purpose)
Purpose
Section
Item
Main
Sub
Click on the first or last page to see other AR-C170 (serv.man26) service manuals if exist.