Sharp AR-C170 (serv.man26) Service Manual ▷ View online
AR-C170M SIMULATION 9 - 29
(Counters to be cleared)
(Counters to be cleared)
After replacement of the OPC drum, the following counters are
cleared.
cleared.
(Counters to be cleared)
1. Press the [EXECUTE] key.
The display for reconfirmation to clear is shown.
2. Select YES or NO to clear the counter.
YES: Clear
NO: Not clear
NO: Not clear
After removing waste toner from the transfer section, the counter
is cleared.
is cleared.
24
-4
Purpose
Data clear
Function
(Purpose)
(Purpose)
Used to reset the maintenance counter.
Item
Counter
Maintenance
Operation/
Procedure
Procedure
1. Press the [EXECUTE] key. The display for
reconfirmation to clear is shown.
2. Select YES or NO to clear the counter.
YES: Clear
NO: Not clear
NO: Not clear
MAINTE (COL)
Maintenance counter (Color)
MAINTE (ALL)
Maintenance counter (Total)
BELT UNIT
Transfer unit print counter
FUSER UNIT
Fusing unit print counter
24
-6
Purpose
Data clear
Function
(Purpose)
(Purpose)
Used to clear the copy counters.
Item
Counter
Operation/
Procedure
Procedure
1. Select the counter to be cleared.
2. Press the [EXECUTE] key.
2. Press the [EXECUTE] key.
The display for reconfirmation to clear is shown.
3. Select YES or NO to clear the counter.
YES: Clear
NO: Not clear
NO: Not clear
Display
Content
COPY BW
Copier (B/W) counter
COPY COL
Copier (Color) counter
SINGLE COLOR
Single color
24
-7
Purpose
Data clear
Function
(Purpose)
(Purpose)
Used to clear the OPC drum (membrane decrease)
correction counter. (This simulation is performed
with the OPC drum is replaced.)
correction counter. (This simulation is performed
with the OPC drum is replaced.)
Section
Process (Photoconductor,
developing, transfer, cleaning)
developing, transfer, cleaning)
Photoconductor
Item
Counter
Photoconductor
Operation/
Procedure
Procedure
1. Select the counter to be cleared.
2. Press the [EXECUTE] key.
2. Press the [EXECUTE] key.
The display for reconfirmation to clear is shown.
Select YES or NO to clear the counter.
YES: Clear
NO: Not clear
Select YES or NO to clear the counter.
YES: Clear
NO: Not clear
Display
Content
DRUM CTRG K
Drum cartridge (K)
DRUM CTRG C
Drum cartridge (C)
DRUM CTRG M
Drum cartridge (M)
DRUM CTRG Y
Drum cartridge (Y)
24
-8
Purpose
Data clear
Function
(Purpose)
(Purpose)
Used to clear the waste toner counter in the transfer
section.
section.
Section
Process (Photoconductor,
developing, transfer, cleaning)
developing, transfer, cleaning)
Transfer
Item
Counter
Operation/
Procedure
Procedure
In order to execute this simulation, the following
conditions must be satisfied. Be sure to check them
in advance.
conditions must be satisfied. Be sure to check them
in advance.
∗
The transfer unit is installed to the machine.
∗
All the cabinet open/close detection switches are
ON.
ON.
AR-C170M SIMULATION 9 - 30
(Counters to be cleared)
(Counters to be cleared)
2. Press the [EXECUTE] key. The selected toner key is
highlighted, and all the drum motors rotate (117m/s), and the
specified toner remaining quantity sensor level is displayed.
After 10min, the motors stop, and the [EXECUTE] key returns
to the normal display.
specified toner remaining quantity sensor level is displayed.
After 10min, the motors stop, and the [EXECUTE] key returns
to the normal display.
When the [EXECUTE] key is pressed during rotation of the
motors, the motors will stop and the [EXECUTE] key will return to
the normal display.
motors, the motors will stop and the [EXECUTE] key will return to
the normal display.
24
-9
Purpose
Data clear
Function
(Purpose)
(Purpose)
Used to clear the printer mode counter and the self-
print mode print counter. (After completion of
maintenance, the counters are cleared.)
print mode print counter. (After completion of
maintenance, the counters are cleared.)
Section
Printer
Item
Counter
Printer
Operation/
Procedure
Procedure
1. Select the counter to be cleared.
2. Press the [EXECUTE] key.
2. Press the [EXECUTE] key.
The display for reconfirmation to clear is shown.
3. Select YES or NO to clear the counter.
YES: Clear
NO: Not clear
NO: Not clear
PRINT BW
Printer mode print counter (B/W)
PRINT COL
Printer mode print counter (Color)
OTHER BW
Self print mode print counter (B/W)
OTHER COL
Self print mode print counter (Color)
24
-10
Purpose
Data clear
Function
(Purpose)
(Purpose)
Used to clear the FAX counter. (with FAX installed)
Section
FAX
Item
Counter
Operation/
Procedure
Procedure
1. Select the counter to be cleared.
2. Press the [EXECUTE] key.
2. Press the [EXECUTE] key.
The display for reconfirmation to clear is shown.
3. Select YES or NO to clear the counter.
YES: Clear
NO: Not clear
NO: Not clear
Display
Content
FAX SEND
FAX send counter
FAX RECEIVED
FAX receive counter
FAX OUTPUT
FAX print number
SEND IMAGES
FAX send number counter
SEND TIIME
FAX send time
RECEIVE TIME
FAX receive time
24
-15
Purpose
Data clear
Function
(Purpose)
(Purpose)
Used to clear the network scanner counter.
Section
Scanner section
Item
Counter
Operation/
Procedure
Procedure
1. Select the counter to be cleared.
2. Press the [EXECUTE] key.
2. Press the [EXECUTE] key.
The display for reconfirmation to clear is shown.
3. Select YES or NO to clear the counter.
YES: Clear
NO: Not clear
NO: Not clear
NETWORK
SCANNER (BW)
SCANNER (BW)
Network scanner document scan quantity
counter (B/W)
counter (B/W)
NETWORK
SCANNER (COL)
SCANNER (COL)
Network scanner document scan quantity
counter (Color)
counter (Color)
SCANNER E-MAIL
Scanner e-mail send counter
SCANNER FTP
Scanner FTP send counter
25
25
-1
Purpose
Operation test/check
Function
(Purpose)
(Purpose)
Used to check the operation of the process section
(excluding the image process section) and the toner
remaining quantity sensor. (The toner remaining
quantity sensor output can be monitored.)
(excluding the image process section) and the toner
remaining quantity sensor. (The toner remaining
quantity sensor output can be monitored.)
Section
Process (Photoconductor, developing, transfer,
cleaning)
cleaning)
Item
Operation
Operation/
Procedure
Procedure
1. Select the color to check the toner remaining
quantity.
AR-C170M SIMULATION 9 - 31
3. Used to set the paper kind display mode in the manual paper
feed mode.
∗
Documents or paper of 8.5" x 13" are treated as a selectable
size.
size.
(Selection item)
[Copy vendor mode]
1. Select the kind of the counter with the scroll key.
2. Enter "1" or "2" with the 10-key pad and press the [OK] key.
26
26
-2
Purpose
Setting
Function
(Purpose)
(Purpose)
1. Used to set the paper size of the large capacity
tray. (When the paper size is changed, the
software setup must be changed accordingly
with this simulation.)
software setup must be changed accordingly
with this simulation.)
2. Used to detect 8.5 " x 13" (INCH Series) paper or
documents and to set the display mode. (All
paper feed modes)
paper feed modes)
3. Used to set the display form of the paper kind in
the manual paper feed mode.
Section
Paper feed
Item
Specifications
Operation/
Procedure
Procedure
1. Used to set the paper size of the large capacity
tray.
2. Used to set to allow 8.5" x 13" size paper to be
treated as a selectable size.
Item
Set value
Content
Paper size
setting
setting
LCC
1
8.5 x 11
2
A4
LEGAL
0
8.5 x 14
1
8.5 x 13
MFT TYPE
0
Displayed in gram.
1
Displayed in pound.
26
-3
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to set the auditor specification mode. Setting
must be made according to the use conditions of the
auditor.
must be made according to the use conditions of the
auditor.
Section
Auditor
Item
Specifications
Operation/
Procedure
Procedure
Enter the code number corresponding to the auditor
specification mode.
specification mode.
Mode
Content
[P10]
Built-in auditor mode
[AR-EC1]
Card counter mode (only Japan)
[MODE1]
Coin vendor mode 1
[MODE2]
Coin vendor mode 2
[MODE3]
Coin vendor mode 3
Diag
setting
Specified
number
completed
with money
left
Lack of money during a
copy job
Specified
number
completed
with no
money left
BW/Color
(with no
money left)
Color (with
money left)
Case 1
Case 2
Case 3
Case 4
26-3=3
MODE1
Operation 1 Operation 2 Operation 2
Operation 1
26-3=4
MODE2
Operation 1 Operation 1 Operation 2
Operation 1
26-3=5
MODE3
Operation 1 Operation 3 Operation 2
Operation 3
Operation 1: The set status remains until the auto clear set
time has passed. (Default: 60sec Changeable
with key operations.)
with key operations.)
Operation 2: Auto clear is not made.
Operation 3: Setting is immediately cleared, and the display
Operation 3: Setting is immediately cleared, and the display
returns to the standby menu.
Case 1/Case 2 (with money left): B/W copy is allowed. If, however,
charge money fro color copy is exhausted during a color copy job,
when sufficient money for the job is supplied, only the color start
key of the READY lamp lights up.
charge money fro color copy is exhausted during a color copy job,
when sufficient money for the job is supplied, only the color start
key of the READY lamp lights up.
26
-5
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to set the count mode of the total counter and
the maintenance counter.
the maintenance counter.
Item
Specifications
Counter
Operation/
Procedure
Procedure
Used to set the single count-up or double count-up
for the total counter, the maintenance counter, and
the developer counter when printing is performed
with A3, 11 x 17" paper.
for the total counter, the maintenance counter, and
the developer counter when printing is performed
with A3, 11 x 17" paper.
Item
Content
Set range
Default
A
TOTAL(B/W)
Total counter (B/W)
1 – 2
2
B
TOTAL(COL)
Total counter (Color)
1 – 2
2
C
MAINTE(B/W)
Maintenance (B/W)
1 – 2
2
D
MAINTE(COL)
Maintenance (Color)
1 – 2
2
AR-C170M SIMULATION 9 - 32
(Destinations to be selected)
26
-6
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to set the destination specifications (paper,
fixed copy magnification ratios, image (process)
correction, machine operation in case of an error,
etc.).
fixed copy magnification ratios, image (process)
correction, machine operation in case of an error,
etc.).
Item
Specifications
Destination
Operation/
Procedure
Procedure
The current destination is highlighted.
Select a desired destination.
Select a desired destination.
Destination
U.S.A.
United States of America
Canada
Canada
Inch
Inch series, other destinations
Japan
Japan
AB_B
AB series (B5 detection), other destinations
Europe
Europe
U.K.
United Kingdom
Aus.
Australia
AB_A
AB series (A5 detection), other destinations
China
China
SIM No.
Content
U.S.A
Canada
Inch
Japan
AB_B
SIM26-02
Manual feed paper kind display
1 (LBS)
1 (LBS)
1 (LBS)
0 (GRAM)
0 (GRAM)
SIM26-02
Legal set value
0 (8.5 x 14)
0 (8.5 x 14)
0 (8.5 x 14)
0 (8.5 x 14)
0 (8.5 x 14)
SIM26-41
Center binding AMS setting
0 (No support)
0 (No support)
0 (No support)
0 (No support)
0 (No support)
SIM26-50A
Black-White reverse key display
1 (Display
enabled)
1 (Display
enabled)
1 (Display
enabled)
1 (Display
enabled)
1 (Display
enabled)
SIM26-50C
Scanner reading send timer set
key
key
1 (Display
enabled)
1 (Display
enabled)
0 (Display
disabled)
0 (Display
disabled)
0 (Display
disabled)
SIM26-52
White paper exit count-up setting
1 (Counts up.)
1 (Counts up.)
1 (Counts up.)
0 (No counts)
1 (Counts up.)
SIM26-69
Setting of specifications when
toner cartridge life near end
toner cartridge life near end
0 (CONTINUE) 0 (CONTINUE) 0 (CONTINUE) 0 (CONTINUE) 0 (CONTINUE)
SIM26-72
High image quality mode disable/
enable setting
enable setting
1 (Display
enabled)
1 (Display
enabled)
1 (Display
enabled)
1 (Display
enabled)
1 (Display
enabled)
SIM46-19
B/W auto exposure mode setting
2 (EX Japan)
2 (EX Japan)
2 (EX Japan)
1 (Japan)
2 (EX Japan)
SIM46-33C
Filter setting of color automatic
document recognition
document recognition
2 (EX Japan)
2 (EX Japan)
2 (EX Japan)
1 (Japan)
2 (EX Japan)
SIM21-1
Transfer unit maintenance cycle
100K
100K
100K
100K
100K
SIM21-1
Fusing unit maintenance cycle
100K
100K
100K
100K
100K
SIM67-29A
4bit screen photo mode
0 (Photo 1)
0 (Photo 1)
0 (Photo 1)
0 (Photo 1)
0 (Photo 1)
SIM67-29B
4bit screen graphic mode
0 (Graphic 1)
0 (Graphic 1)
0 (Graphic 1)
0 (Graphic 1)
0 (Graphic 1)
SIM43-01 A
TH1 control temperature when
ready standby
ready standby
150
150
150
150
150
SIM43-01 B
TH2 control temperature when
ready standby
ready standby
135
135
135
135
135
SIM43-01 E
Normal paper TH1 set value
145
145
145
145
145
SIM43-01 F
Normal paper TH2 set value
135
135
135
135
135
SIM43-01 G
Previous rotation start
temperature in warm-up
temperature in warm-up
135
135
135
135
135
SIM43-01 H
Fusing motor rotation complete
temperature during warm-up
temperature during warm-up
135
135
135
135
135
SIM48-06 I
Fusing motor correction value
(Normal paper large size: length
420mm or above)
(Normal paper large size: length
420mm or above)
85
85
85
85
85
FAX
FAX destination
181 (USA)
181 (USA)
181 (USA)
0 (JAPAN)
254 (TW)
Key operation
Language setting
0 x 50
0 x 50
0 x 5c
0 x 51
0 x 5c
Key operation
Tray 1 size setting
1 (8.5 x 11)
1 (8.5 x 11)
1 (8.5 x 11)
2 (A4)
2 (A4)
Key operation
Tray 2 size setting
1 (8.5 x 11)
1 (8.5 x 11)
1 (8.5 x 11)
2 (A4)
2 (A4)
Key operation
Tray 3 size setting
1 (8.5 x 11)
1 (8.5 x 11)
1 (8.5 x 11)
2 (A4)
2 (A4)
Key operation
Tray 4 size setting
1 (8.5 x 11)
1 (8.5 x 11)
1 (8.5 x 11)
2 (A4)
2 (A4)
Key operation
LCC size setting
1 (8.5 x 11)
1 (8.5 x 11)
1 (8.5 x 11)
2 (A4)
2 (A4)
Key operation
Manual feed size setting
1 (8.5 x 11)
1 (8.5 x 11)
1 (8.5 x 11)
2 (A4)
2 (A4)
Key operation
Document detection setting
1 (INCH_1)
1 (INCH_1)
1 (INCH_1)
3 (AB_1)
3 (AB_1)
Key operation
Auto summer time setting
0 (Disable)
0 (Disable)
0 (Disable)
0 (Disable)
0 (Disable)
Key operation
Tray 1 special size
Special
Special
Special
Special
Special
Key operation
Tray 2 special size
Special
Special
Special
Special
Special
Key operation
Tray 3 special size
Special
Special
Special
Special
Special
Key operation
Tray 4 special size
Special
Special
Special
Special
Special
Key operation
A4 letter automatic switch
0 (OFF)
0 (OFF)
0 (OFF)
0 (OFF)
0 (OFF)
Key operation
Automatic copy mode display
switch
switch
1 (ON)
0 (OFF)
0 (OFF)
0 (OFF)
0 (OFF)
Key operation
Document feed unit high image
quality mode setting
quality mode setting
0 (300dpi)
0 (300dpi)
1 (600dpi)
1 (600dpi)
1 (600dpi)
Key operation
Copy mode offset (top tray)
(No offset)
(No offset)
(Offset
provided)
(Offset
provided)
(Offset
provided)
Click on the first or last page to see other AR-C170 (serv.man26) service manuals if exist.