Sharp AR-C170 (serv.man26) Service Manual ▷ View online
AR-C170M SIMULATION 9 - 33
Language setup: 0x50 American English, 0x51 Japanese, 0x5c Chinese, 0x5c English
Key operation
Scanner read send time setting
0 sec.
0 sec.
60 sec.
60 sec.
60 sec.
PRT environment
setting
setting
PCL symbol set
1 (Roman8)
1 (Roman8)
1 (Roman8)
36 (Win3.1J)
1 (Roman8)
PRT environment
setting
setting
PCL font
0 (Font No. 0)
0 (Font No. 0)
0 (Font No. 0)
81
(Font No. 81)
0 (Font No. 0)
SIM No.
Content
U.S.A
Canada
Inch
Japan
AB_B
SIM No.
Content
Europe
U.K.
Aus.
AB_A
China
SIM26-02
Manual feed paper kind display
0 (GRAM)
0 (GRAM)
0 (GRAM)
0 (GRAM)
0 (GRAM)
SIM26-02
Legal set value
0 (8.5x14)
0 (8.5x14)
1 (8.5x13)
0 (8.5x14)
0 (8.5x14)
SIM26-41
Center binding AMS setting
1 (AMS setting) 1 (AMS setting)
0 (Disable)
0 (Disable)
0 (Disable)
SIM26-50A
Black-White reverse key display
1 (Display
enabled)
1 (Display
disabled)
1 (Display
enabled)
1 (Display
enabled)
1 (Display
enabled)
SIM26-50C
Scanner reading send timer set
key
key
0 (Display
disabled)
0 (Display
disabled)
0 (Display
disabled)
0 (Display
disabled)
0 (Display
disabled)
SIM26-52
B/W paper exit count-up setting
1 (Counts up.)
1 (Counts up.)
0 (No counts)
1 (Counts up.)
1 (Counts up.)
SIM26-69
Setting of specifications when
toner cartridge life near end
toner cartridge life near end
0 (CONTINUE)
1 (STOP)
0 (CONTINUE) 0 (CONTINUE) 0 (CONTINUE)
SIM26-72
High image quality mode disable/
enable setting
enable setting
1 (Display
enabled)
1 (Display
enabled)
1 (Display
enabled)
1 (Display
enabled)
1 (Display
enabled)
SIM46-19
B/W auto exposure mode setting
2 (EX Japan)
2 (EX Japan)
2 (EX Japan)
2 (EX Japan)
2 (EX Japan)
SIM46-33C
Filter setting of color automatic
document recognition
document recognition
2 (EX Japan)
2 (EX Japan)
2 (EX Japan)
2 (EX Japan)
2 (EX Japan)
SIM21-1
Transfer unit maintenance cycle
100K
100K
100K
100K
100K
SIM21-1
Fusing unit maintenance cycle
100K
100K
100K
100K
100K
SIM67-29A
4bit screen photo mode
0 (Photo 1)
0 (Photo 1)
0 (Photo 1)
0 (Photo 1)
0 (Photo 1)
SIM67-29B
4bit screen graphic mode
0 (Graphic 1)
0 (Graphic 1)
0 (Graphic 1)
0 (Graphic 1)
0 (Graphic 1)
SIM43-01 A
TH1 control temperature when
ready standby
ready standby
150
150
150
150
150
SIM43-01 B
TH2 control temperature when
ready standby
ready standby
135
135
135
135
135
SIM43-01 E
Normal paper TH1 set value
145
145
145
145
145
SIM43-01 F
Normal paper TH2 set value
135
135
135
135
135
SIM43-01 G
Previous rotation start
temperature in warm-up
temperature in warm-up
135
135
135
135
135
SIM43-01 H
Fusing motor rotation complete
temperature during warm-up
temperature during warm-up
135
135
135
135
135
SIM48-06 I
Fusing motor correction value
(Normal paper large size: length
420mm or above)
(Normal paper large size: length
420mm or above)
85
85
85
85
85
FAX
FAX destination
4 (GERMAN)
180
(ENGLAND)
9
(AUSTRALIA)
181 (USA)
38 (CHINA)
Key operation
Language setting
0x5c
0x5c
0x5c
0x5c
0x5b
Key operation
Tray 1 size setting
2 (A4)
2 (A4)
2 (A4)
2 (A4)
2 (A4)
Key operation
Tray 2 size setting
2 (A4)
2 (A4)
2 (A4)
2 (A4)
2 (A4)
Key operation
Tray 3 size setting
2 (A4)
2 (A4)
2 (A4)
2 (A4)
2 (A4)
Key operation
Tray 4 size setting
2 (A4)
2 (A4)
2 (A4)
2 (A4)
2 (A4)
Key operation
LCC size detection
2 (A4)
2 (A4)
2 (A4)
2 (A4)
2 (A4)
Key operation
Manual fee size setting
2 (A4)
2 (A4)
2 (A4)
2 (A4)
2 (A4)
Key operation
Document detection setting
3 (AB_1)
3 (AB_1)
4 (AB_2)
3 (AB_1)
3 (AB_1)
Key operation
Auto summer time setting
1 (Enable)
0 (Disable)
1 (Enable)
0 (Disable)
0 (Disable)
Key operation
Tray 1 special size
Special
Special
Special
Special
Special
Key operation
Tray 2 special size
Special
Special
Special
Special
Special
Key operation
Tray 3 special size
Special
Special
Special
Special
Special
Key operation
Tray 4 special size
Special
Special
Special
Special
Special
Key operation
A4 letter automatic switch
1 (ON)
1 (ON)
0 (OFF)
0 (OFF)
0 (OFF)
Key operation
Automatic copy mode display
switch
switch
0 (OFF)
0 (OFF)
0 (OFF)
0 (OFF)
0 (OFF)
Key operation
Document feed unit high image
quality mode setting
quality mode setting
0 (300dpi)
0 (300dpi)
0 (600dpi)
0 (600dpi)
0 (600dpi)
Key operation
Copy mode offset (top tray)
(No offset)
(No offset)
(Offset
provided)
(Offset
provided)
(Offset
provided)
Key operation
Scanner read send time setting
60 sec.
60 sec.
60 sec.
60 sec.
60 sec.
PRT environment
setting
setting
PCL symbol set
1 (Roman8)
1 (Roman8)
1 (Roman8)
1 (Roman8)
1 (Roman8)
PRT environment
setting
setting
PCL font
0 (Font No. 0)
0 (Font No. 0)
0 (Font No. 0)
0 (Font No. 0)
0 (Font No. 0)
AR-C170M SIMULATION 9 - 34
(Trial mode setting)
(Toner save mode setting)
[Target item]
∗
Maintenance preset counter (Depending on the set value of
SIM21-1.)
SIM21-1.)
∗
Consumable part replacement timing
Transfer belt (Depending on the set value of SIM21-1.)
Fusing unit (Depending on the set value of SIM21-1.)
OPC drum
When the toner cartridge is emptied, printing is stopped regardless
of this setup.
of this setup.
26
-10
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to set the trial mode of the network scanner.
Section
Scanner
Item
Specifications
Operation/
Procedure
Procedure
1. Set ON/OFF of the trial mode with the 10-key
pad, and press the [OK] key.
∗
The B/W start key or the color start key can be
used instead of the [OK] key in the above
procedure.
used instead of the [OK] key in the above
procedure.
Item
Content
Set range
Default
A
Trial mode setting
0: NO
1: YES
1: YES
0
26
-18
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to set YES/NO of toner save operation. (This
simulation is Enable only for Japan and UK versions.
It depends on SIM 26-6 (Destination) setting.
For the other destinations, the same setting can be
made by the user program P22. (Effective only in the
monochrome copy mode)
simulation is Enable only for Japan and UK versions.
It depends on SIM 26-6 (Destination) setting.
For the other destinations, the same setting can be
made by the user program P22. (Effective only in the
monochrome copy mode)
Item
Specifications
Operation mode (Common)
Operation/
Procedure
Procedure
Enter the code number corresponding to the
condition (the toner save YES/NO) with the 10-key
and press the [OK] Key.
condition (the toner save YES/NO) with the 10-key
and press the [OK] Key.
Item
Content
Set range Default
A COPY
(0:NO 1:YES)
Copy mode toner save
mode inhibit
mode inhibit
0:NO
1:YES
1:YES
0
B NO USE
–
–
–
C PRINTER
(0:NO 1:YES)
Printer mode toner save
mode inhibit
mode inhibit
0:NO
1:YES
1:YES
0
26
-35
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to set whether the trouble history display by
SIM 22-4 is displayed as one trouble or as the
accumulated number of continuous troubles when
two or more troubles of same kind occur
continuously.
SIM 22-4 is displayed as one trouble or as the
accumulated number of continuous troubles when
two or more troubles of same kind occur
continuously.
Item
Specifications
Operation/
Procedure
Procedure
Used to set whether the trouble history display by
SIM 22-4 is displayed as one trouble or as the
accumulated number of continuous troubles when
two or more troubles of same kind occur
continuously.
1. Select the number corresponding to the display
SIM 22-4 is displayed as one trouble or as the
accumulated number of continuous troubles when
two or more troubles of same kind occur
continuously.
1. Select the number corresponding to the display
mode with the 10-key and press the [OK] key.
Item
Set
value
Default
The trouble history display by SIM 22-4 is
displayed as it is when two or more troubles
occur continuously.
displayed as it is when two or more troubles
occur continuously.
1
0
The trouble history display by SIM 22-4 is
displayed as one trouble when two or more
troubles occur continuously.
displayed as one trouble when two or more
troubles occur continuously.
0
26
-38
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to set "Continue/Stop" of printing when the
maintenance timing (replacement timing of each
consumable part) is reached.
maintenance timing (replacement timing of each
consumable part) is reached.
Item
Specifications
Operation/
Procedure
Procedure
When the maintenance timing (replacement timing
of each consumable part) is reached, set "Continue/
Stop" of printing by entering the code number with
the 10-key, referring to the table below. Then press
the [OK] key.
of each consumable part) is reached, set "Continue/
Stop" of printing by entering the code number with
the 10-key, referring to the table below. Then press
the [OK] key.
Item
Content
Set value
Default
A
(0:CONTINUE
1:STOP)
Used to set
"Continue/Stop" of
printing when the
maintenance
timing
(replacement
timing of each
consumable part)
is reached.
"Continue/Stop" of
printing when the
maintenance
timing
(replacement
timing of each
consumable part)
is reached.
0 Continues
printing.
0
1 Stops
printing.
AR-C170M SIMULATION 9 - 35
(Setting of AMS in the center binding mode)
(Set value)
(Items to be selected)
∗
When item C is set to 1 (display enable), the scanner send time
is set to 0 sec for USA and Canada in connection with the
destination, or to 60 sec for the other destinations. When set to
0 (Display enable), the scanner send time is set to 60 sec.
is set to 0 sec for USA and Canada in connection with the
destination, or to 60 sec for the other destinations. When set to
0 (Display enable), the scanner send time is set to 60 sec.
(B/W count up setting)
Non-print paper (white paper)
No-print-on-cover paper (Copy/Printer)
No-print-on-OHP-insertion paper (Copy/Printer)
26
-41
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to set Enable/Disable of AMS operation in the
center-binding mode.
center-binding mode.
Item
Specifications
Operation/
Procedure
Procedure
Enter the corresponding code of Enable/Disable of
AMS operation in the center-binding mode with the
10-key pad, and press the [OK] key.
AMS operation in the center-binding mode with the
10-key pad, and press the [OK] key.
∗
The B/W start key or the color start key cans be
used instead of the [OK] key in the above
procedure.
used instead of the [OK] key in the above
procedure.
Item
Content
Set value
Default
A
(0:NO
1:YES)
1:YES)
Setting of AMS
operation in the
center binding
mode
operation in the
center binding
mode
0
AMS operation
is disabled.
is disabled.
1: Europe
and UK
0: Others
and UK
0: Others
1
AMS operation
is enabled.
is enabled.
26
-49
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to set the copy speed mode.
Item
Specifications
Operation mode
Operation/
Procedure
Procedure
1. The highlighted key is the currently set key.
2. When each key is pressed, the selected set
2. When each key is pressed, the selected set
value is saved in the EEPROM, and the pressed
key is highlighted.
key is highlighted.
∗
Each set item has one content of setting.
Item
Set
value
Content
Default
POSTCARD
LOW
Postcard copy speed: 6 CPM
LOW
HIGH
Postcard copy speed: 13 CPM
26
-50
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to set Black-White reverse, group rounding,
and scanner send time display.
and scanner send time display.
Item
Specifications
Operation mode
Operation/
Procedure
Procedure
1. Select an item with the scroll key.
2. Enter the set value with the 10-key, and press
2. Enter the set value with the 10-key, and press
the [OK] key.
3. Press the B/W start key or the color start key to
save the set value in the EEPROM.
Item
Content
Set range
Default
A (0: Display disabled
1: Display enabled)
B/W reverse
disable/enable
setting
disable/enable
setting
0 – 1
UK: Disable
Other: Enable
Other: Enable
B (0: Group rounding
allowed
1: Group rounding
inhibited)
1: Group rounding
inhibited)
Group rounding
setting
setting
0 – 1
0
C (0: Display disabled
(1: Display enabled)
Scanner mode
send time
display setting
send time
display setting
0 – 1
USA, Canada:
Enable
Enable
0 (Display disabled)
1 (Display enabled)
USA & Canada
Send time 60sec
Send time 0sec
Other than USA &
Canada
Canada
Send time 60sec
Send time 60sec
26
-52
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to set YES/NO of count up of non-copy paper
(cover or insertion paper).
(cover or insertion paper).
Item
Specifications
Operation mode
Operation/
Procedure
Procedure
1. Enter the set value corresponding to the
operation mode with the 10-key.
2. Press the [OK] key.
∗
The B/W start key or the color start key can be
used instead of the [OK] key in the above
procedure.
used instead of the [OK] key in the above
procedure.
Item
Content
Set value
Default
A (0:DON’T
1:DO)
Non-copy
paper count-up
setting
paper count-up
setting
0
Not count up.
1: Other
countries
0: Japan/
Australia
countries
0: Japan/
Australia
1
Counts up.
AR-C170M SIMULATION 9 - 36
When "Disable" is selected, the user program does not show the
menu of the user auto color calibration (automatic adjustment of
copy color balance and density).
menu of the user auto color calibration (automatic adjustment of
copy color balance and density).
1: When set to enable, the easy calibration, test print, and color
balance cannot be performed in the color adjustment of printer
setting of key operation.
setting of key operation.
26
-53
Purpose
Setting
Function
(Purpose)
(Purpose)
Used by the user to set Enable/Disable auto color
calibration (auto adjustment of color balance and
density)
calibration (auto adjustment of color balance and
density)
Item
Specifications
Operation mode
Operation/
Procedure
Procedure
1. Select Enable or Disable with the 10-key.
Disable 0: YES
Enable 1: NO
Enable 1: NO
2. Press the [OK] key.
Set
value
Content
Default
0
Disable auto color calibration (automatic
adjustment of copy color balance and density)
adjustment of copy color balance and density)
1
1
Enable auto color calibration (automatic
adjustment of copy color balance and density)
adjustment of copy color balance and density)
26
-54
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to set enable/disable of auto color calibration
for the printer.
for the printer.
Item
Specifications
Operation mode
Operation/
Procedure
Procedure
1. Select Enable or Disable with the 10-key.
Disable 0: YES
Enable 1: NO
Enable 1: NO
2. Press the [OK] key.
Set
value
Content
Default
0
Disable auto color calibration (automatic
adjustment of printer color balance and
density)
adjustment of printer color balance and
density)
1
1
Enable auto color calibration (automatic
adjustment of printer color balance and
density)
adjustment of printer color balance and
density)
26
-57
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to set the model name for use as the status
information.
information.
ためた
Item
Specifications
Operation/
Procedure
Procedure
The current model name (AR-C170M) is highlighted.
∗
There is only one model name, and no selection is
allowed.
allowed.
Model
AR-C170M
Copier/printer model
26
-65
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to set the finisher alarm mode.
ためた
Item
Specifications
Operation/
Procedure
Procedure
Press the key which shows the staple limit quantity.
The entered number is set and the pressed key is
highlighted.
The entered number is set and the pressed key is
highlighted.
Item
Content
Set value
Default
STAPLE
LIMIT
LIMIT
Staple limit
quantity
quantity
30
Staple limit quantity: 30
30
50
Staple limit quantity: 50
26
-69
Purpose
Setting
Function
(Purpose)
(Purpose)
Used to set the operation specifications in case of
toner cartridge life near end.
toner cartridge life near end.
Item
Specifications
Operation/
Procedure
Procedure
1. Enter the value corresponding to the operation
specification by the 10-key, and press [OK] key.
Item
Content
Set value
Default
A 0: CONTINUE
1: STOP
Used to set
whether print/
copy is
enabled or not
when the toner
cartridge life
reaches the
near end.
whether print/
copy is
enabled or not
when the toner
cartridge life
reaches the
near end.
1 Print/copy is
inhibited when
the toner
cartridge life
reaches the
near end.
the toner
cartridge life
reaches the
near end.
1: UK
0 Print/copy is
enabled until
the toner
cartridge life
reaches the
end.
the toner
cartridge life
reaches the
end.
0: Other
than UK
than UK
Click on the first or last page to see other AR-C170 (serv.man26) service manuals if exist.