Sharp AR-AX1 (serv.man2) User Manual / Operation Manual ▷ View online
AXIS 700
User’s Manual
Section 2: Basic Installation
25
Using BOOTP
in UNIX
Follow these steps to download the Internet address using the
BOOTP method:
BOOTP method:
1. Append the following entry to your boot table. This is typically
performed by editing the file
/etc/bootptab
.
where:
Example:
2. If necessary, update your host table and alias name databases as
required by your system.
3. Start the BOOTP daemon, if it is not already running. This is
typically performed using the command
bootpd -a
4. Restart the AXIS 700 to download the Internet address, default
router address and subnet mask. You can perform a restart remotely
via the AXIS 700 web interface. See “Specifying System Settings ”on
page 36.
via the AXIS 700 web interface. See “Specifying System Settings ”on
page 36.
<host name>:ht=<hardware type>:vm=<vendor magic>:\
:ha=<hardware address>:ip=<Internet address>:\
:sm=<subnet mask>:gw=<gateway field>
ht
ether
for Ethernet
vm
rfc1048
ha
The Ethernet or node address, i.e. the AXIS 700 serial number
ip
The Internet address of the AXIS 700
sm
The subnet mask
gw
The default router address
spserv:ht=ether:vm=rfc1048:\
:ha=00408c24c01c:ip=172.16.253.80:\
:sm=255.255.0.0:gw=172.16.253.254
Section 2: Basic Installation
AXIS 700 User’s Manual
26
Verifying the Installation
Upon successful installation, the AXIS 700 will identify the attached
scanner and display the name of the detected device. If the scanner is
not supported, an error message will be displayed.
scanner and display the name of the detected device. If the scanner is
not supported, an error message will be displayed.
If no destinations have been specified yet, the AXIS 700 will display:
If one or more destinations have already been specified, the AXIS 700
will display:
will display:
where “
xxxxxx
” is the first destination in the destination list.
To verify the communication, you can access the AXIS 700 using a
standard Web browser such as Netscape Navigator or Internet
Explorer:
standard Web browser such as Netscape Navigator or Internet
Explorer:
1. Place a document in the scanner.
2. Start your Web browser.
3. Enter the name or Internet address of your AXIS 700 in the
location/address field.
Example:
Example:
&RQQHFW XVLQJ
:HE EURZVHU
6HQG WR
[[[[[[
http://172.16.253.80
AXIS 700
User’s Manual
Section 2: Basic Installation
27
4. The AXIS 700 Home Page, the Scan Document page, is
displayed. Click Scan. Depending on the image format specified
by the scanning profile, the Web browser will display the scanned
image in an associated image viewer or ask you to save the file.
by the scanning profile, the Web browser will display the scanned
image in an associated image viewer or ask you to save the file.
Section 2: Basic Installation
AXIS 700 User’s Manual
28
Click on the first or last page to see other AR-AX1 (serv.man2) service manuals if exist.