DOWNLOAD Sharp AR-AX1 (serv.man2) Service Manual ↓ Size: 1014.65 KB | Pages: 83 in PDF or view online for FREE

AXIS 700 User’s Manual

 

2

 

Please observe all safety markings and instructions when 
using this product.

potential hazard that can damage the product.

potential hazard that can seriously impair 

operation.

Do not proceed any of the above notices until you have fully 
understood the implications.

The unauthorized copying of materials that are covered by 
copyright and other international proprietory or intellectual 
property rights is prohibited in most countries. Axis 
Communications AB recommends that the users of this 
equipment seek the necessary authorizations for copying 
material. The instructions for use in the manual shall not be 
considered as an inducement to make illicit duplications of 
material. Any duplication will be made at the user’s own 
risk.

This equipment generates, uses, and can radiate 

radio frequency energy and if not installed and used in 
accordance with the instruction manual, may cause 
interference to radio communications. It has been tested 
and found to comply with the limits for a Class A 
computing device pursuant to Subpart B of Part 15 of FCC 
rules, which are designed to provide reasonable protection 
against such interference when operated in a commercial 
environment. Operation of this equipment in a residential 
area is likely to cause interference in which case the user at 
his/her own expense will be required to take whatever 
measures may be required to correct the interference. 
Shielded cables should be used with this unit to ensure 
compliance with the Class A limits.

This digital equipment fulfils the requirements 

for radiated emission according to limit B of 
EN55022/1994, and the requirements for immunity 
according to EN50082-1/1992 residential, commercial, and 
light industry (Compliance is not valid for unshielded 
network and printer cables).

Every care has been taken in the preparation of this manual; if you 
detect any inaccuracies or omissions, please inform us at an 
address which can be found in the last appendix of the manual. 
AXIS Communications AB cannot be held responsible for any 
technical or typographical errors and reserves the right to make 
changes to the product and manuals without prior notice. Axis 
Communications AB makes no warranty of any kind with regard 
to the material contained within this document, including, but 
not limited to, the implied warranties of merchantability and 
fitness for a particular purpose. Axis Communications AB shall 
not be liable nor responsible for incidental or consequential 
damages in connection with the furnishing, performance or use of 
this material.

Axis Communications warrants that the AXIS 700 is Year 2000 
compliant.

Acrobat, Adobe, AIX, DOS, Ethernet, IBM, Internet Explorer, 
Macintosh, Microsoft, Netscape, OS/2, UNIX and Windows are 
registered trademarks of the respective holders.

AXIS 700 User’s Manual
Revision 1.1
Part No: 15475
Dated: June 1998
Copyright © Axis Communications AB, 
1997 - 1998

AXIS 700

User’s Manual

Preface 

 

3

 

Thank you for purchasing the AXIS 700 Network Scan Server. This product has been developed 
to connect your scanners anywhere in your network, simplifying distribution and archiving of 
paper-based information. The AXIS 700 can also be integrated with workflow and document 
management systems.

The manual provides introductory information as well as detailed instructions on how to set up 
and manage the AXIS 700 in various network environments. It is intended for everyone involved 
in installing and managing the AXIS 700. To fully benefit from the manual, you should be 
familiar with basic networking principles.

This manual applies to the AXIS 700 with software release 1.10 and subsequent releases until 
otherwise notified. 

Axis Communications is dedicated to providing innovative solutions for network-connected 
computer peripherals. Since the start in 1984, Axis has been one of the fastest growing companies 
in the market and is now a leader in its field.

Being the core of all Axis’ products, the ThinServer™ technology 

enables them to act as intelligent file server independent ThinServer™ devices. A ThinServer™ 
device is a network server which includes “thin” embedded server software capable of 
simultaneous multiprotocol communication, scalable RISC hardware and a built-in Web server 
which allows easy access and management via any standard Web browser. The ThinServer™ 
technology makes it possible to connect any electronic device to the network, thus providing 
“Access to everything”.

Today, Axis Communications is offering the ThinServer™ technology as well as six major 
ThinServer™ product lines consisting of:

offer you a powerful and cost-efficient method for sharing printer 

resources in your network. They connect to any standard printer, featuring high performance, 
simple management and easy upgrading across the network. The print servers are available in 
Ethernet, Fast Ethernet and Token Ring versions.

Preface

AXIS 700 User’s Manual

 

4

 

includes a 

wide range of LAN, coax and twinax attached print servers for the IBM host environment. By 
emulating IBM devices, these servers provide conversion of the IPDS, SCS and 3270DS data 
streams to the major ASCII printer languages. 

provide you with a flexible and cost-efficient 

solution for sharing CD-ROMs, DVD-ROMs and other optical media across the network. They 
are available in Ethernet, Fast Ethernet and Token Ring versions.

offer network connectivity for re-writable media such as 

hard disks and Iomega Jaz cartridges, which, via the storage server, can be backed up on DAT 
tapes. They are only available in Ethernet versions.

provide live images using standard Internet technology, thus 

enabling access to live cameras via any standard Web browser. They offer a perfect solution for 
remote surveillance over the Internet and their sharp images can bring life into any web site. 
These servers support Ethernet as well as PSTN and GSM phone lines.

enable easy distribution of paper-based information across workgroups 

and the enterprise. By sending the scanned documents to your destination via the 
Internet/intranet, you will reduce your faxing/mailing costs, as well as save time, thus improving 
your organization efficiency.

Should you require any technical assistance, please contact your local dealer. If your questions 
cannot be answered immediately, your local dealer will forward your queries through the 
appropriate channels to ensure you a rapid response.

The AXIS 700 is covered with a best-of-breed warranty 

and service program. If you take advantage of the Axis User Group free 
membership, you can obtain a 5 year warranty, free software upgrades and 
support. In the USA and Canada there is also a 24 hour unit replacement 
service and a 90 days money back guarantee.

WWW:

http://www.axis.com 

If you are connected to Internet, you can find online 
manuals, technical support, firmware updates, 
application software, company information, on any of 
the addresses listed to the left.

FTP server:

ftp://ftp.axis.com/pub/axis

Support
e-mail address: