Sharp AR-651 (serv.man25) User Manual / Operation Manual ▷ View online
1
2
3
4
5
6
7
8
9
10
11
12
3-3
1
Place paper in the drawer(s).
Page 2-4
- When using this mode in bypass copying, be sure to specify
the paper size.
Page 5-10,5-11
Manual Paper Selection
It may not be possible for the device to perform Automatic Paper Selection with highly transparent originals
such as OHP films and tracing paper, wholly dark originals or originals with dark borders, or irregular sized
originals such as newspapers and magazines. For these types of originals, use manual paper selection.
* When the desired size of paper is not set in any of the drawers, you can change the paper size of the
drawer (
such as OHP films and tracing paper, wholly dark originals or originals with dark borders, or irregular sized
originals such as newspapers and magazines. For these types of originals, use manual paper selection.
* When the desired size of paper is not set in any of the drawers, you can change the paper size of the
drawer (
Page 2-6) or use the sheet bypass copying (
Page 5-8).
- Or press the ZOOM··· key to enter the next screen, and
press the key of the desired paper size.
- OTHER key
Page 5-14
3
On the basic screen, press the drawer icon representing
the desired paper size.
Select other copy modes as required.
4
Press the START key.
2
Place the original(s).
Page 2-9
1
2
3
4
5
6
7
8
9
10
11
12
3-4
SETTING OF BASIC COPY MODES
3
Press the AMS key.
- OTHER key
Page 5-14
5
Press the START key.
Automatic Magnification Selection (AMS)
4
Place the original(s).
Page 2-9
- The built-in sensors automatically detect the size of the
original(s) and compute the reproduction ratio using the
specified paper size.
specified paper size.
- If the following messages are shown, proceed as directed:
Change direction of original
Use reduced-size drawer
2. REDUCTION AND ENLARGEMENT COPYING
When placing originals on the glass, you can copy them at the reducing and enlarging rate of 25 to 400%.
For the reversing automatic document feeder, you can make copy at the reducing and enlarging rate of 25
to 200%.
There are the following three ways of making copies in the reduction and enlargement mode:
For the reversing automatic document feeder, you can make copy at the reducing and enlarging rate of 25
to 200%.
There are the following three ways of making copies in the reduction and enlargement mode:
Using Automatic Magnification Selection (AMS)
Specifying both original size and copy size
Using the reduction/enlargement zoom keys or the one-touch zoom keys
Specifying both original size and copy size
Using the reduction/enlargement zoom keys or the one-touch zoom keys
* It is not possible for the device to perform Automatic Magnification Selection with highly transparent
originals such as OHP films and tracing paper, wholly dark originals or originals with dark borders, or
irregular sized originals such as newspapers and magazines. For these types of originals, use the other
reduction/enlargement modes.
Original sizes for which Automatic Magnification Selection (automatic detection) is available
irregular sized originals such as newspapers and magazines. For these types of originals, use the other
reduction/enlargement modes.
Original sizes for which Automatic Magnification Selection (automatic detection) is available
Page 2-9
* Set the paper size for “the OTHER” key as required (
Page 5-14). When the set originals or paper are
a non-standard size other than A3, A4, B4 or B5, you will select the OTHER key on the screen of step
3 below. Before pressing it, you need to make the OTHER key recognize the same size as the originals
or paper that have been set.
3 below. Before pressing it, you need to make the OTHER key recognize the same size as the originals
or paper that have been set.
1
Place paper in the drawer(s).
Page2-4
2
Press the desired drawer, then the ZOOM··· key.
- The copy paper size is selectable on the screen in step 3 as
well.
well.
Select other copy modes as required.
1
2
3
4
5
6
7
8
9
10
11
12
3-5
4
Press the key corresponding to the original size.
- Using the original size and copy size, the correct reproduction
ratio is computed and displayed on the screen.
- OTHER key
Page 5-14
1
Place paper in the drawer(s).
Page 2-4
2
Place the original(s).
Page 2-9
3
Press the desired drawer, then the ZOOM··· key.
- The copy paper size is selectable on the screen in step 4 as
well.
Specifying both Original Size and Copy Size
Select other copy modes as required.
5
Press the START key.
1
2
3
4
5
6
7
8
9
10
11
12
3-6
SETTING OF BASIC COPY MODES
5
Press the START key.
3
Press the drawer icon representing the desired copy
paper size, then press the ZOOM···· key.
- The copy paper size is selectable on the screen in step 4 as
well.
4
Press the UP (or DOWN ) key to set the
desired reproduction ratio.
- Each time you press either key, the reproduction ratio changes
by 1%. Holding down the key changes it continuously.
- You can also select the reproduction ratio by pressing the
400% , 200% , 100% , 50% or 25% key directly. (When
placing the originals on the reversing automatic document
feeder, you cannnot select 400% key.)
placing the originals on the reversing automatic document
feeder, you cannnot select 400% key.)
- OTHER key
Page 5-14
2
Place the original(s).
Page 2-9
2. REDUCTION AND ENLARGEMENT COPYING (Cont.)
Using the Reduction/Enlargement Zoom Keys or One-touch Zoom Keys
1
Place paper in the drawer(s).
Page 2-4
Select other copy modes as required.
Click on the first or last page to see other AR-651 (serv.man25) service manuals if exist.