Sharp AR-651 (serv.man25) User Manual / Operation Manual ▷ View online
1
2
3
4
5
6
7
8
9
10
11
12
2-17
Changing the Printing Order
1
Press the JOB STATUS key on the control panel,
then the JOB LIST key on the touch panel.
2
Select the job you want to move.
4
The changing order is completed.
- If you want to return to the basic screen ( before JOB STATUS
key is pressed):
Page 2-16, Tip
3
Press the MOVE key, then press the position where
the selected job is to move to.
- The job to be moved will be shifted next to new proiority.
- The job with top priority (having been printed or suspended)
cannot be moved.
1
2
3
4
5
6
7
8
9
10
11
12
3-1
3. SETTING OF BASIC COPY MODES
1. Paper selection ..........................................................................
3-2
- Automatic paper selection (APS) .................................................................. 3-2
- Manual paper selection ................................................................................. 3-3
2. Reduction and enlargement copying .........................................
3-4
3. Duplex copying (1-sided, 2-sided, book-type)............................
3-7
4. Copy density adjustment ..........................................................
3-11
5. Selecting original mode ............................................................
3-13
6. Quick access menu ..................................................................
3-14
1
2
3
4
5
6
7
8
9
10
11
12
3-2
SETTING OF BASIC COPY MODES
Select other copy modes as required.
4
Press the START key.
- If the Automatic Paper Selection mode is not selected, press
the ZOOM··· key, then press the APS key on the next
screen.
screen.
- If the following messages are shown, proceed as directed:
Change direction of original
Set correct cassette
When the selected drawer size and the original size are the
same, the copier rotates the original data 90° and makes a copy
in the same size as the original even if those directions differ
(e.g. an A4-size original is set while the same size paper is set
in R direction). This function, however, is applicable to plain
paper only.
same, the copier rotates the original data 90° and makes a copy
in the same size as the original even if those directions differ
(e.g. an A4-size original is set while the same size paper is set
in R direction). This function, however, is applicable to plain
paper only.
1. PAPER SELECTION
When you place regular-sized originals on the glass or in the reversing automatic document feeder, the
built-in sensors automatically work to detect the size of the originals, helping the copier select and copy on
paper that is the same size as the original.
* Depending on the condition of the original, automatic paper selection may not work correctly. In that case,
built-in sensors automatically work to detect the size of the originals, helping the copier select and copy on
paper that is the same size as the original.
* Depending on the condition of the original, automatic paper selection may not work correctly. In that case,
select the paper size manually.
Page 3-3
* This mode can only be used for actual-size (100%) copying.
* Original sizes capable of automatic detection
* Original sizes capable of automatic detection
Page 2-9
Automatic Paper Selection (APS)
2
Place the original(s).
Page 2-9
3
Confirm that the Automatic Paper Selection mode
(default setting) is selected on the basic screen.
1
Place paper in the drawer(s).
Page 2-4
Click on the first or last page to see other AR-651 (serv.man25) service manuals if exist.