Sharp AR-651 (serv.man25) User Manual / Operation Manual ▷ View online
1
2
3
4
5
6
7
8
9
10
11
12
1-7
- SETTINGS (set functions confirmation) key
This key allows you to confirm the functions that have been set.
(The display shown on the right is an example.)
(The display shown on the right is an example.)
Clearing the Functions Selected
The icons displayed on the screen are as follows(some icons may not appear on the screen):
If you press any key that is half-tone shaded, the function selected is cleared. Also, if the copier is left
inactive for approx. 45 seconds, the automatic CLEAR ALL (
inactive for approx. 45 seconds, the automatic CLEAR ALL (
Page 1-5) works and the settings will be
cleared.
1
2
3
4
5
6
7
8
9
10
11
12
1-8
BEFORE MAKING COPIES
2. TURNING ON THE POWER SWITCH
2
When “READY” appears, the copier is ready for
copying.
1
Turn ON the power switch.
- This message appears on the message panel of the Basic
Screen:
Wait Warming Up
Turning ON the Power Switch
Turning ON the Power Switch/Auto Job Start
- Time of warming up
AR-651/810: Approx. 160 seconds
Up to 5 jobs can be stored in the memory. Place the originals for the
6th job on the original glass or the reversing automatic document feeder
and press the
6th job on the original glass or the reversing automatic document feeder
and press the
START key. The following message will appear:
Auto Job Start
While the copier is warming up, place the original on the glass,
select the desired copy modes and press the
select the desired copy modes and press the
START key.
The copier starts scanning the originals.
When this message appears, copying will automatically start.
While the above message is displayed, stopping printing due to
paper jam, etc. concels the job of auto start. To clear this status,
press the CLEAR ALL or the STOP key.
paper jam, etc. concels the job of auto start. To clear this status,
press the CLEAR ALL or the STOP key.
READY
Auto Start
1
2
3
4
5
6
7
8
9
10
11
12
1-9
1
When the account number function is in use, the
screen shown on the right appears immediately after the
power switch is turned on or the auto-clear is carried
out.
2
Key in a registered account number (5-digit).
- The copier will be ready for copying.
Controlling the Use of the Copier with Account Numbers
With the use of account numbers, you can restrict copier users as well as manage copy volumes made
by individual groups or departments of your company.
* Registering, changing and deleting a account number
by individual groups or departments of your company.
* Registering, changing and deleting a account number
Page 5-21
If the account number function is in use, be sure to press the CLEAR ALL key on the control panel
twice after finishing copying. The display returns to the account number input screen and the account
number function will remain active.
twice after finishing copying. The display returns to the account number input screen and the account
number function will remain active.
After Copying is Finished
the account number you have entered may be incorrect. Key
in the correct code.
in the correct code.
Enter Account Number
If the following message remains displayed,
Click on the first or last page to see other AR-651 (serv.man25) service manuals if exist.