Sharp AR-203 (serv.man5) Service Manual ▷ View online
AR-203E/5420/M200/M201 SIMULATION, TROUBLE CODES 10 - 20
46
12
Density adjustment in the
FAX mode (Collective
adjustment) (Executable
only when the FAX is
installed.)
FAX mode (Collective
adjustment) (Executable
only when the FAX is
installed.)
[Function]
When [START] key is pressed, scan is executed with the entered exposure adjustment value
and the data stored on the FAX side is rewritten into the entered value.
All data of the exposure adjustment values are rewritten into the same value.
For the density adjustment table data, refer to simulation 46-13 (density adjustment (Normal
text) in the FAX mode).
When [START] key is pressed, scan is executed with the entered exposure adjustment value
and the data stored on the FAX side is rewritten into the entered value.
All data of the exposure adjustment values are rewritten into the same value.
For the density adjustment table data, refer to simulation 46-13 (density adjustment (Normal
text) in the FAX mode).
[Operation]
13
FAX mode density
adjustment (Normal text)
(Executable only when the
FAX is installed.)
adjustment (Normal text)
(Executable only when the
FAX is installed.)
[Function]
Scan is started with the exposure adjustment value entered with [START] key, and the stored
data of the selected mode on the FAX side is rewritten into the input value.
Scan is started with the exposure adjustment value entered with [START] key, and the stored
data of the selected mode on the FAX side is rewritten into the input value.
[Operation]
14
FAX mode density
adjustment (Fine text)
(Executable only when the
FAX is installed.)
adjustment (Fine text)
(Executable only when the
FAX is installed.)
[Function]
When [START] key is pressed, scan is started with the entered exposure adjustment value and
the data of the selected mode on the FAX side is changed to the entered value.
For the density adjustment value table data, refer to simulation 46-13 (FAX mode density
adjustment (Normal text).)
When [START] key is pressed, scan is started with the entered exposure adjustment value and
the data of the selected mode on the FAX side is changed to the entered value.
For the density adjustment value table data, refer to simulation 46-13 (FAX mode density
adjustment (Normal text).)
[Operation]
Main
code
code
Sub
code
Contents
Details of function/operation
1) Initial display
("XX" is the exposure adjustment value of
normal text stored on the FAX side.)
normal text stored on the FAX side.)
2) Enter a 2-digit value as the exposure
adjustment value.
("YY" is the entered exposure adjustment
value.)
value.)
3) Scan is started (self print), and the LED
of [START] key is turned off.
4) Print is started (self print).
After completion of printing, returns to “2)”
display.
display.
ADJUST EXP. AUTO
XX
ADJUST EXP. AUTO
YY
ADJUST EXP. AUTO
SCAN YY
ADJUST EXP. AUTO
PRINT YY
Density adjustment value data table
When initializing each data: 50
Mode
Photo
Exposure adjustment value
STD (Normal text)
off
Fine (Fine text)
on
off
off
Sfine (Super fine)
on
off
off
1) Initial display
("XX" is the corresponding exposure adjust-
ment value of normal text mode stored on the
FAX side.)
ment value of normal text mode stored on the
FAX side.)
2) Enter a 2-digit value as the exposure
adjustment value with [Numeric] key.
("YY" is the entered exposure adjustment
value.)
value.)
3) Scan is started (self print), and the LED
of [START] key is turned off.
4) Print is started (self print).
After completion of printing, returns to “2)”
display.
display.
ADJUST EXP. STD
XX
ADJUST EXP. STD
YY
ADJUST EXP. STD
SCAN YY
ADJUST EXP. STD
PRINT YY
1) Initial display
("XX" is the corresponding exposure adjust-
ment value of the fine text mode stored on
the FAX side.)
ment value of the fine text mode stored on
the FAX side.)
2) Enter a 2-digit value as the exposure
adjustment value with [Numeric] key.
("YY" is the entered exposure adjustment
value.)
value.)
3) Scan start (self print)
4) Print start (self print)
After completion of printing, returns to “2)”
display.
display.
ADJUST EXP. FINE
XX
ADJUST EXP. FINE
YY
ADJUST EXP. FINE
SCAN YY
ADJUST EXP. AUTO
PRINT YY
AR-203E/5420/M200/M201 SIMULATION, TROUBLE CODES 10 - 21
46
15
FAX mode density
adjustment (Super fine)
(Executable only when the
FAX is installed.)
adjustment (Super fine)
(Executable only when the
FAX is installed.)
[Function]
When [START] key is pressed, scan is started with the entered exposure adjustment value and
the data of the selected mode on the FAX side is changed to the entered value.
When [START] key is pressed, scan is started with the entered exposure adjustment value and
the data of the selected mode on the FAX side is changed to the entered value.
For the density adjustment value table data, refer to simulation 46-13 (FAX mode density
adjustment (Normal text).)
adjustment (Normal text).)
[Operation]
18
Image contrast adjustment
(300dpi)
(300dpi)
[Function]
Contrast is set for each mode.
When this simulation is executed, the current se value is displayed in 2 digits (Default: 50).
Change the set value and press [START] key to make a copy under the set value.
When the set value is increased, the contrast becomes higher. When the set value is
decreased, the contrast becomes lower.
In this case, only Exp.3 copy is made. When, however, the setting is made to make higher con-
trast, Exp.1 and Exp.5 copies also become in higher contrast. When made to a lower contrast,
Exp1. and Exp.5 copies become lower contrast, too.
Press [Exposure mode selector] key (or [
Contrast is set for each mode.
When this simulation is executed, the current se value is displayed in 2 digits (Default: 50).
Change the set value and press [START] key to make a copy under the set value.
When the set value is increased, the contrast becomes higher. When the set value is
decreased, the contrast becomes lower.
In this case, only Exp.3 copy is made. When, however, the setting is made to make higher con-
trast, Exp.1 and Exp.5 copies also become in higher contrast. When made to a lower contrast,
Exp1. and Exp.5 copies become lower contrast, too.
Press [Exposure mode selector] key (or [
] [
] key for the AR-M200/M201) to switch the
mode. The set value of the selected mode is displayed on the LCD/display. (Adjustment value: 1
– 99)
– 99)
* No density display on LCD/display.
[Operation]
The operation is similar to simulation 46-01.
The operation is similar to simulation 46-01.
Main
code
code
Sub
code
Contents
Details of function/operation
1) Initial display
("XX" is the corresponding exposure adjust-
ment value of the super fine mode stored on
the FAX side.)
ment value of the super fine mode stored on
the FAX side.)
2) Enter a 2-digit value as the exposure
adjustment value with [Numeric] key.
("YY" is the entered exposure adjustment
value.)
value.)
3) Scan start (self print)
4) Print start (self print)
After completion of printing, returns to “2)”
display.
display.
ADJUST EXP. S-FINE
XX
ADJUST EXP. S-FINE
YY
ADJUST EXP. S-FINE
SCAN YY
ADJUST EXP. S-FINE
PRINT YY
Mode
Display item
(AR-M200/M201)
LED
(AR-M200/M201)
Display lamp
(AR-203E/5420)
Default
AE mode (300dpi)
AE
COPY mode lamp
AE mode lamp
50
TEXT mode (300dpi)
TEXT
PRINT mode lamp
TEXT mode lamp
50
PHOTO mode
PHOTO
SCAN mode lamp
PHOTO mode lamp
50
TS mode (TEXT)
(300dpi)
(300dpi)
TSTXT
PRINT mode lamp
SCAN mode lamp
SCAN mode lamp
TEXT mode lamp
PHOTO mode lamp
PHOTO mode lamp
50
TS mode (AE)
(300dpi)
(300dpi)
TSAE
COPY mode lamp
SCAN mode lamp
SCAN mode lamp
AE mode lamp
PHOTO mode lamp
PHOTO mode lamp
50
AR-203E/5420/M200/M201 SIMULATION, TROUBLE CODES 10 - 22
46
19
Exposure mode setup
[Function]
<
<
γ
table setting>
When this simulation is executed, the code number of the current set gamma table is displayed.
(Default: 2)
Enter the code number corresponding to the desired gamma table, and press [Exposure mode
selector] key (or [
(Default: 2)
Enter the code number corresponding to the desired gamma table, and press [Exposure mode
selector] key (or [
] [
] key for the AR-M200/M201) to change the mode and write into the
EEPROM.
<AE operation mode>
When setting the
When setting the
γ
table, press [Exposure mode selector] key
(or [
] key for the AR-M200/
M201) to change to the AE operation mode, and the current set code number of the AE opera-
tion mode is displayed. (Default: 0)
Enter the code number corresponding to the desired AE operation mode and press [Exposure
mode selector] key (or [
tion mode is displayed. (Default: 0)
Enter the code number corresponding to the desired AE operation mode and press [Exposure
mode selector] key (or [
] [
] key for the AR-M200/M201) to change the mode and write
into the EEPROM.
<PHOTO image process setting>
When [Exposure mode selector] key (or [
When [Exposure mode selector] key (or [
] key for the AR-M200/M201) is pressed in AE
operation mode setting, the mode is changed to the PHOTO image process setting and the
code number of the current set PHOTO image process setting is displayed. (Default: 1)
Enter the code number corresponding to the desired PHOTO image process setting and press
[Exposure mode selector] key (or [
code number of the current set PHOTO image process setting is displayed. (Default: 1)
Enter the code number corresponding to the desired PHOTO image process setting and press
[Exposure mode selector] key (or [
] [
] key for the AR-M200/M201) to change the mode
and write into the EEPROM.
[Operation]
The operation is similar to simulation 43-01.
The operation is similar to simulation 43-01.
20
SPF/RSPF exposure
correction (Only the
AR-203E/M200/M201 with
the SPF/RSPF installed)
correction (Only the
AR-203E/M200/M201 with
the SPF/RSPF installed)
[Function]
Used to adjust the exposure correction amount in the SPF/RSPF mode. The adjustment is
made by adjusting Vref voltage variation for the OC mode.
When this simulation is executed, the current set value is displayed in 2 digits (Default: 50).
Change the set value and press [START] key to save the setting and make a copy.
When the set value is increased, copy becomes darker. When the set value is decreased, copy
becomes lighter. (Adjustment range: 1 – 99)
Used to adjust the exposure correction amount in the SPF/RSPF mode. The adjustment is
made by adjusting Vref voltage variation for the OC mode.
When this simulation is executed, the current set value is displayed in 2 digits (Default: 50).
Change the set value and press [START] key to save the setting and make a copy.
When the set value is increased, copy becomes darker. When the set value is decreased, copy
becomes lighter. (Adjustment range: 1 – 99)
[Operation]
The operation is similar to simulation 46-01.
The operation is similar to simulation 46-01.
Main
code
code
Sub
code
Contents
Details of function/operation
Mode
Display item
(AR-M200/M201)
Display lamp
(AR-203E/5420)
Code
number
Setting content
Remark
γ
GAMMA
OFF
1
Image quality priority
mode
mode
2
Toner consumption
priority mode
priority mode
Default
AE
AE
AE
0
Lead edge stop
Default
1
Real time process
PHOTO
PHOTO
PHOTO
1
Error diffusion process
Default
2
Dither process
Mode
Display item
(AR-M200/M201)
Display lamp
(AR-203E)
Default
Remark
RSPF/SPF
SPF
TEXT mode lamp
50
AR-203E/5420/M200/M201 SIMULATION, TROUBLE CODES 10 - 23
46
29
Image contrast adjustment
(600dpi)
(600dpi)
[Function]
Contrast is set for each mode.
When this simulation is executed, the current se value is displayed in 2 digits (Default: 50).
Change the set value and press [START] key to make a copy under the set value.
When the set value is increased, the contrast becomes higher. When the set value is
decreased, the contrast becomes lower.
In this case, only Exp.3 copy is made. When, however, the setting is made to make higher con-
trast, Exp.1 and Exp.5 copies also become in higher contrast. When made to a lower contrast,
Exp1. and Exp.5 copies become lower contrast, too.
Press [Exposure mode selector] key (or [
Contrast is set for each mode.
When this simulation is executed, the current se value is displayed in 2 digits (Default: 50).
Change the set value and press [START] key to make a copy under the set value.
When the set value is increased, the contrast becomes higher. When the set value is
decreased, the contrast becomes lower.
In this case, only Exp.3 copy is made. When, however, the setting is made to make higher con-
trast, Exp.1 and Exp.5 copies also become in higher contrast. When made to a lower contrast,
Exp1. and Exp.5 copies become lower contrast, too.
Press [Exposure mode selector] key (or [
] [
] key for the AR-M200/M201) to switch the mode.
The set value of the selected mode is displayed on the LCD/display. (Adjustment value: 1 – 99)
* No density display on LCD/display.
[Operation]
The operation is similar to simulation 46-01.
The operation is similar to simulation 46-01.
30
AE limit adjustment
[Function]
Used to set the limit value in AE and AE (toner save).
Change the setting and press [OK]/[ENTER]/[START] key to write the setting into the EEPROM.
The machine goes into the sub code entry standby mode.
By pressing [Exposure mode selector] key (or [
Used to set the limit value in AE and AE (toner save).
Change the setting and press [OK]/[ENTER]/[START] key to write the setting into the EEPROM.
The machine goes into the sub code entry standby mode.
By pressing [Exposure mode selector] key (or [
] [
] key for the AR-M200/M201), setting is
changed. (Setting range: 0 – 31, Default: 0)
<Remark>
When simulation 26-06 (Destination setting) or simulation 46-19 Auto Exposure mode is
changed, the setting of this simulation is also changed to the default in connection.
changed, the setting of this simulation is also changed to the default in connection.
[Operation]
The operation is similar to simulation 46-19.
The operation is similar to simulation 46-19.
31
Image sharpness
adjustment
adjustment
[Function]
Used to adjust sharpening/blurring of image in each mode.
Used to adjust sharpening/blurring of image in each mode.
When this simulation is executed, warm-up and shading are performed and the current set
value is displayed. (Default: 1)
Change the set value and press [START] key to make a copy under the set conditions.
To change the mode, press [Exposure mode selector] key
value is displayed. (Default: 1)
Change the set value and press [START] key to make a copy under the set conditions.
To change the mode, press [Exposure mode selector] key
(or [
] [
] key for the AR-M200/
M201). The code number of the selected mode is dip0slayed on the LCD/display.
[Operation]
The operation is similar to simulation 46-01.
The operation is similar to simulation 46-01.
Main
code
code
Sub
code
Contents
Details of function/operation
Mode
Display item
(AR-M200/M201)
LED
(AR-M200/M201)
Display lamp
(AR-203E/5420)
Default
AE mode (600dpi)
AE
COPY mode lamp
AE mode lamp
50
TEXT mode (600dpi)
TEXT
PRINT mode lamp TEXT mode lamp
50
PHOTO mode
PHOTO
SCAN mode lamp
PHOTO mode lamp
50
TS mode (TEXT)
(600dpi)
(600dpi)
TSTXT
PRINT mode lamp
SCAN mode lamp
SCAN mode lamp
TEXT mode lamp
PHOTO mode lamp
PHOTO mode lamp
50
TS mode (AE)
(600dpi)
(600dpi)
TSAE
COPY mode lamp
SCAN mode lamp
SCAN mode lamp
AE mode lamp
PHOTO mode lamp
PHOTO mode lamp
50
Mode
Display item
(AR-M200/M201)
Display lamp
(AR-203E/5420)
Remark
Limit value for AE
AE
AE mode lamp
Limit value for AE (toner save)
TEXT
TEXT mode lamp
Image quality
Setting No
Remark
Blurring
0
Standard
1
Default
Sharpening
2
Mode
Display item
(AR-M200/M201)
LED
(AR-M200/M201)
Display lamp
(AR-203E/5420)
Default
AE mode
AE
COPY mode lamp
AE mode lamp
1
TEXT mode
TEXT
PRINT mode lamp
TEXT mode lamp
1
PHOTO mode
PHOTO
SCAN mode lamp
PHOTO mode lamp
1
TS mode (TEXT)
TSTXT
PRINT mode lamp
SCAN mode lamp
SCAN mode lamp
TEXT mode lamp
PHOTO mode lamp
PHOTO mode lamp
1
TS mode (AE)
TSAE
COPY mode lamp
SCAN mode lamp
SCAN mode lamp
AE mode lamp
PHOTO mode lamp
PHOTO mode lamp
1
Click on the first or last page to see other AR-203 (serv.man5) service manuals if exist.